NICE WINGO5KIT WG5000 Swing Gate Motor Kit – Up to 3.5 M

NICE WINGO5KIT Automatic Swing Gate Opener UAE

The NICE WINGO5KIT WINGO5BDKCE is a professional automatic double swing gate motor kit using two NICE WG5000 230V electromechanical linear motors. It is designed for residential swing gates with leaves measuring up to 3.5 metres each, subject to the official NICE relationship between gate leaf length and weight.

The WG5000 combines a powerful 1700 N thrust rating, 230V AC motor technology, surface-mounted installation, mechanical opening stop and manual Nice-key release. Together with the NICE MC800 electronic control unit, the WINGO5KIT provides a reliable automation solution for villas, compounds and private properties throughout the UAE.

Important: The maximum gate weight must always be considered together with the gate leaf length. A WG5000 may handle close to 500 KG only with a shorter gate leaf. At approximately 3.5 metres leaf length, the permitted weight is substantially lower.

NICE WINGO5KIT Key Features

• Complete automatic double swing gate motor kit
• Uses 2 × NICE WG5000 electromechanical motors
• Maximum gate leaf length up to 3.5 metres each
• Gate weight depends on actual leaf length
• 230V AC motor technology
• Maximum absorbed power: 200 W per motor
• Current absorption: 1.5 A per motor
• Maximum published force: 1700 N
• Linear movement speed: 0.013 m/s
• Working cycle: 30 cycles/hour
• Mechanical opening limit stop
• Manual release with NICE key
• Surface-mounted linear motor design
• NICE MC800 electronic control unit
• Bidirectional radio technology according to kit configuration
• Automatic gate travel programming
• Programmable automatic closing
• Pedestrian opening function
• Safety photocell compatibility
• Electric lock compatibility
• Electric lock required for leaves longer than 3 m
• IP44 weather protection
• Operating temperature from -20°C to +50°C

NICE WG5000 Technical Specifications

Brand	NICE
Kit Model	WINGO5BDKCE / WINGO5KIT
Motor Model	WG5000
Motor Quantity	2
Gate Type	Double-Leaf Swing Gate
Maximum Leaf Length	Up to 3.5 Metres per Leaf
Maximum Leaf Weight	Up to Approx. 500 KG with Short Leaves; Reduces as Leaf Length Increases
Power Supply	230V AC, 50 Hz
Current Absorption	1.5 A
Power	200 W
Maximum Force	1700 N
Speed	0.013 m/s
Working Cycle	30 Cycles/Hour
Limit / Travel Stop	Mechanical Opening Stop
Manual Release	NICE Key Release
Control Unit	NICE MC800
Protection Rating	IP44
Operating Temperature	-20°C to +50°C
Dimensions per Motor	920 × 98 × 95 mm
Weight per Motor	6 KG

Up to 3.5 Metres per Gate Leaf

The NICE WG5000 is designed for swing gate leaves measuring up to approximately 3.5 metres. A double WINGO5KIT installation can therefore automate two suitable swing leaves with each leaf up to the manufacturer's specified maximum length.

The 3.5 m rating applies to each individual gate leaf, not to the total width of both gate leaves combined.

Important Gate Weight & Length Relationship

The WG5000 should not be described simply as a 500 KG per leaf motor without qualification. NICE provides an operating-limit graph showing that the permitted leaf weight reduces as the gate becomes longer.

Short leaves can approach the upper weight limit, while a gate leaf at approximately 3.5 metres must be substantially lighter, at approximately 200 KG according to the NICE operating-limit graph.

Always check both gate length and gate weight before selecting the motor.

Electric Lock Required Above 3 Metres

NICE specifies an electric lock as obligatory for gate leaves longer than 3 metres. Compatible accessories include vertical and horizontal 12V electric locks according to the gate design.

This requirement is particularly important on long swing gates because the lock provides additional security and helps hold the gate securely in the closed position.

1700 N Gate Motor Force

The NICE WG5000 provides a published force of approximately 1700 N. Correct installation geometry is essential because the effective force transferred to the gate depends on motor bracket positioning, hinge position and gate-post dimensions.

Incorrect bracket dimensions can reduce available force, limit the opening angle or cause excessive mechanical stress.

230V AC Swing Gate Automation

The WG5000 is a 230V AC electromechanical linear gate motor. NICE specifies approximately 1.5 A current absorption and 200 W power.

This proven 230V architecture is suitable for residential gate automation where dependable mechanical operation is required.

0.013 m/s Linear Movement Speed

NICE specifies the WG5000 at approximately 0.013 m/s. This is the linear actuator movement speed, not the angular movement speed of the actual gate leaf.

The final gate opening time depends on installation geometry, opening angle and bracket dimensions.

30 Cycles per Hour

The official WG5000 technical data specifies a working cycle of approximately 30 cycles per hour.

Actual permissible use can be affected by gate size, weight, wind pressure, ambient temperature, hinge resistance and installation geometry.

Mechanical Opening Stop

The WG5000 includes a mechanical stop for the opening position. It is adjusted during installation according to the required gate opening position.

Correctly setting the mechanical opening stop helps prevent unnecessary impact at the fully open position.

Manual NICE Key Release

Each NICE WG5000 motor includes a manual release system operated with a NICE key. This allows the motor to be mechanically disengaged if the gate needs to be moved manually during a power failure or maintenance.

Before automation, each gate leaf should move smoothly by hand without excessive resistance.

NICE MC800 Control Unit

The current WINGO5 kit is supplied with the NICE MC800 control unit. It manages both WG5000 motors together with radio controls, safety photocells, automatic closing, pedestrian opening and other programmable gate functions.

The MC800 provides a professional central control platform for double-leaf 230V swing gate automation.

Automatic Gate Travel Programming

The MC800 allows professional setup of the opening and closing sequence for both gate leaves.

Programming should only be completed after the motors, brackets, gate stops, photocells and any required electric lock have been properly installed.

Pedestrian Opening

The WINGO5KIT can be configured with a pedestrian-opening function so that only the required portion of the gate is opened for pedestrian access instead of operating both leaves fully.

This is useful for villas and residential properties where full vehicle opening is not always necessary.

Automatic Closing

The control system can be configured for automatic gate closing after a programmed pause time.

When automatic closing is enabled, safety photocells and all required protection devices must be correctly installed, programmed and tested.

NICE EPM Photocells

The current WINGO5 kit configurations normally include a pair of NICE EPM surface-mounted photocells. These provide an important safety input for detecting vehicles or people across the gate entrance.

The photocells should be correctly aligned and tested after installation.

NICE ELAC Flashing Light

Current WINGO5 kit configurations include a NICE ELAC LED flashing warning light with integrated antenna. The flashing light provides a visible indication when the automatic gate is operating.

NICE WINGO5KIT Official Package

• 2 × NICE WG5000 230V Swing Gate Motors
• 1 × NICE MC800 Control Unit
• 1 × Bidirectional NICE Radio Receiver according to kit version
• 2 × NICE Remote Controls according to supplied kit version
• 1 Pair × NICE EPM Photocells
• 1 × NICE ELAC LED Flashing Light
• 1 × NICE TS Warning Sign

Important: NICE has supplied WINGO5BDKCE with different remote-control references in different current catalogues and markets. Always confirm the actual remotes and receiver included in the UAE stock before ordering.

Remote Control Package Variations

Depending on NICE catalogue generation and market, the WINGO5BDKCE may be shown with NICE INTI2 or newer NICE bidirectional remote-control variants.

For this reason, the product page should describe the exact remote controls physically supplied with your stock rather than automatically copying one international catalogue.

NICE WINGO5KIT Applications

• Villa swing gates
• Residential double swing gates
• Private driveway gates
• Residential compounds
• Apartment entrances
• Steel swing gates
• Aluminium swing gates
• Private parking gates
• Long swing gate leaves up to 3.5 metres

NICE WINGO5KIT for Villas UAE

The NICE WINGO5KIT WG5000 is especially suitable for villas with medium-to-long double swing gate leaves. Its surface-mounted design avoids the need for an underground motor box and makes service access relatively straightforward.

For large solid gates in the UAE, wind load should be carefully considered because long closed-panel gate leaves can place significantly higher force on the motors.

Suitable for Long Swing Gate Leaves

The longer WG5000 actuator body makes WINGO5KIT suitable for longer leaves than WINGO4KIT. NICE officially rates WG5000 for leaves up to approximately 3.5 m.

This makes it a useful residential solution where standard 2 m swing gate motors are too short for the gate geometry.

Surface-Mounted Installation

The WG5000 installs above ground between the gate post and gate leaf using front and rear mounting brackets.

Correct bracket dimensions determine the opening angle, motor leverage and travel. These measurements should be calculated before welding or permanently fixing the motor brackets.

Wind Load Consideration

A solid 3 m or 3.5 m gate leaf can experience considerable wind force even when its physical weight is within the WG5000 operating range.

Motor selection should therefore consider gate design, wind exposure, leaf area, hinge condition and the manufacturer's operating limits, not just gate weight.

Professional NICE WINGO5KIT Installation UAE

Professional installation of the NICE WINGO5KIT WG5000 swing gate motor is available throughout the UAE. Installation can include motor bracket mounting, MC800 panel installation, electrical wiring, photocells, flashing light, receiver setup, remote programming, pedestrian opening and automatic-closing configuration.

For gate leaves exceeding 3 metres, the required electric lock should also be installed and correctly integrated with the automation system.

Installation Checks

• Measure the actual length of each gate leaf
• Confirm the weight of each gate leaf
• Use the official NICE weight-versus-length operating limits
• Inspect hinges and gate-post strength
• Check both gate leaves move freely by hand
• Calculate motor bracket geometry correctly
• Confirm required opening angle
• Assess wind load on solid gate leaves
• Install an electric lock for leaves longer than 3 m
• Install and test photocells
• Program and test the complete system professionally

NICE WINGO5KIT Repair & Spare Parts UAE

Technical support is available for NICE WINGO5KIT, WG5000 and MC800 repair, maintenance and spare parts throughout the UAE.

Replacement items can include WG5000 mechanical components, capacitors, manual release parts, brackets, MC800 control units, NICE radio receivers, remote controls, EPM photocells, ELAC flashing lights and electric locks.

NICE WINGO5KIT vs WINGO4KIT

Specification	WINGO4KIT	WINGO5KIT
Motor	WG4000	WG5000
Maximum Leaf Length	Up to 2 m	Up to 3.5 m
Power Supply	230V AC	230V AC
Power	200 W	200 W
Force	1500 N	1700 N
Speed	0.016 m/s	0.013 m/s
Cycles / Hour	30	30
Motor Length	770 mm	920 mm

The WINGO5KIT is the better choice for longer residential gate leaves, while WINGO4KIT is more compact and better suited to shorter gate leaves up to around 2 m.

NICE WG5000 vs WG5024

The WG5000 is the 230V AC version used in WINGO5KIT. The WG5024 is a 24V DC motor and uses a different electronic control platform.

These products should be treated as separate variants because the motor voltage, control electronics and operating characteristics are different.

Why Choose NICE WINGO5KIT?

• Genuine NICE swing gate automation system
• 2 × WG5000 linear gate motors
• Gate leaves up to 3.5 metres each
• 1700 N motor force
• 230V AC motor technology
• 200 W motor power
• 30 cycles/hour
• Mechanical opening stop
• Manual NICE key release
• NICE MC800 control unit
• Pedestrian opening function
• Automatic closing capability
• Photocell safety compatibility
• Electric lock support
• Professional UAE installation available

Buy NICE WINGO5KIT Swing Gate Motor UAE

Buy the NICE WINGO5KIT WG5000 swing gate motor kit in UAE for reliable automatic operation of residential double swing gates with leaves up to 3.5 metres.

Supply, installation, programming, repair and spare-parts support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What motors are used in NICE WINGO5KIT?
The WINGO5KIT uses 2 × NICE WG5000 230V electromechanical swing gate motors.

What is the maximum gate leaf length?
NICE specifies gate leaves up to approximately 3.5 metres each.

Is NICE WG5000 suitable for 500 KG at 3.5 metres?
No. NICE defines the operating limit according to both gate weight and gate length. The maximum allowable weight falls considerably as leaf length increases.

How much can a 3.5 metre gate leaf weigh?
The NICE operating-limit graph indicates approximately 200 KG near the full 3.5 metre leaf length. Always confirm the exact installation against the manufacturer's graph.

Does a 3.5 metre gate require an electric lock?
Yes. NICE states that an electric lock is obligatory for leaves longer than 3 metres.

What is the power of NICE WG5000?
NICE specifies approximately 200 W with current absorption of approximately 1.5 A.

What is the force of NICE WG5000?
The published force is approximately 1700 N.

What is the speed of NICE WG5000?
The published linear motor speed is approximately 0.013 m/s.

How many cycles per hour can WG5000 perform?
The official technical specification is approximately 30 cycles/hour.

What control board does WINGO5KIT use?
The current WINGO5 kit uses the NICE MC800 control unit.

Does WINGO5KIT include photocells?
Current official WINGO5BDKCE configurations include one pair of NICE EPM photocells, although package contents should always be confirmed before ordering.

Does WG5000 have manual release?
Yes. Each WG5000 includes a manual release operated with a NICE key.

Is WINGO5KIT suitable for UAE villas?
Yes. It is intended for residential swing gate automation when the gate weight, length, geometry and usage comply with NICE operating limits.

Do you provide NICE WINGO5KIT installation in UAE?
Yes. Professional installation, programming, maintenance and repair support is available throughout the UAE.