NICE TOONA 7 TO7024 Swing Gate Motor – Up to 7 M

NICE TO7024 Heavy-Duty 24V Swing Gate Motor UAE

The NICE TOONA 7 TO7024 is a professional 24V DC electromechanical linear swing gate motor designed for very large residential, commercial and industrial swing gates with leaves up to approximately 7 metres. As the largest model in the traditional NICE Toona range, the TO7024 combines powerful 2700 N maximum force, magnetic encoder technology, long 584 mm actuator travel and advanced electronic gate control.

NICE specifies the TO7024 with a 24V DC power supply, 120 W maximum absorbed power, 5 A maximum current, 2700 N maximum force and approximately 0.013 m/s no-load actuator speed. When paired with the compatible NICE MC824H control unit, the complete automation supports BlueBUS safety devices, automatic travel learning, encoder-based obstacle detection, programmable acceleration and slowdown, pedestrian opening and optional PS324 battery backup.

The TO7024 is particularly suitable for large villa entrances, residential compounds, commercial properties, factories, warehouses and other compatible heavy swing gate applications throughout the UAE.

NICE TOONA 7 TO7024 Key Features

• Professional NICE TOONA 7 swing gate operator
• Official model: TO7024
• Suitable for gate leaves up to approximately 7 metres
• Gate weight capacity depends on actual leaf length
• 24V DC electromechanical motor
• Maximum current absorption: 5 A
• Nominal current absorption: 2.5 A
• Maximum absorbed power: 120 W
• Nominal absorbed power: 60 W
• Maximum force: 2700 N
• Nominal force: 1400 N
• No-load actuator speed: 0.013 m/s
• Working cycle: 41 cycles/hour at nominal force
• Long actuator travel: 584 mm
• Magnetic encoder
• Mechanical stop in opening
• Mechanical stop in closing
• Encoder-based obstacle detection when correctly configured
• Compatible with NICE MC824H control unit
• NICE BlueBUS support through MC824H
• Automatic opening and closing position learning
• Programmable acceleration and slowdown
• Pedestrian opening function
• Automatic closing capability
• Automatic fault diagnostics
• Optional PS324 battery backup
• Compatible with NICE professional programming systems
• IP44 weather protection
• Operating temperature from -20°C to +50°C
• Suitable for residential and industrial applications

NICE TO7024 Technical Specifications

Brand	NICE
Series	TOONA 7
Model	TO7024
Product Type	Heavy-Duty Electromechanical Swing Gate Motor
Maximum Gate Leaf Length	Up to 7 Metres
Gate Leaf Weight	Depends on Leaf Length – Refer to NICE Operating Limit Graph
Motor Power Supply	24V DC
Maximum Current Absorption	5 A
Nominal Current Absorption	2.5 A
Maximum Absorbed Power	120 W
Nominal Absorbed Power	60 W
Maximum Force	2700 N
Nominal Force	1400 N
No-Load Speed	0.013 m/s
Work Cycle	41 Cycles/Hour at Nominal Force
Actuator Travel	584 mm
Position Feedback	Magnetic Encoder
Mechanical Stops	Opening & Closing
Protection Rating	IP44
Operating Temperature	-20°C to +50°C
Dimensions	1200 × 128 × 150 mm
Weight	15 KG
Recommended Control Unit	NICE MC824H
Installation	Surface Mounted

Up to 7 Metres per Gate Leaf

The NICE TO7024 is designed for extremely large swing gate leaves measuring up to approximately 7 metres.

This makes TOONA 7 one of the strongest traditional NICE surface-mounted linear swing gate automation solutions and a suitable choice where smaller TOONA 5 and TOONA 6 operators do not provide sufficient gate-leaf capacity.

Important Gate Weight & Length Relationship

The TO7024 should not be described with one fixed maximum KG rating for every gate length. NICE defines its operating limits using a graph that relates gate leaf weight to gate leaf length.

The official operating graph extends to approximately 1700 KG in the shorter-leaf area, while the permitted weight decreases considerably as the gate approaches the full 7 metre length.

This means a very heavy short gate may fall within the TO7024 operating area, but the same weight cannot automatically be used on a 6 m or 7 m leaf.

Why Gate Length Changes Motor Capacity

A long swing gate creates much greater leverage on the hinges, gate post and motor mounting points than a short gate of the same weight.

For this reason, motor selection should consider:

• Actual gate leaf length
• Actual gate leaf weight
• Gate construction
• Gate surface area
• Wind exposure
• Hinge condition
• Gate-post strength
• Motor mounting geometry
• Required opening angle
• Daily operating frequency

2700 N Maximum Force

The NICE TO7024 provides up to approximately 2700 N maximum linear force, making it significantly stronger than smaller TOONA models.

NICE specifies approximately 1400 N nominal force. The maximum 2700 N figure should therefore not be confused with the continuous nominal operating force.

Correct mounting geometry is essential to transfer this force effectively to the swing gate.

24V DC Heavy-Duty Technology

The TO7024 operates from 24V DC. Its low-voltage motor architecture enables advanced electronic movement management when connected to the NICE MC824H control unit.

This includes encoder feedback, automatic position learning, controlled acceleration, slowdown, obstacle detection and optional battery backup.

120 W Maximum Power

NICE specifies maximum electrical absorption of approximately 120 W / 5 A.

At nominal operating conditions, NICE lists approximately 60 W / 2.5 A.

The TO7024 motor must be connected through the correct compatible NICE control unit rather than directly to the 230V mains supply.

0.013 m/s Actuator Speed

The NICE TO7024 has a published no-load linear actuator speed of approximately 0.013 metres per second.

This figure represents the movement speed of the actuator mechanism. Actual gate-opening time depends on the installation geometry, motor bracket dimensions, gate opening angle and control-unit settings.

41 Cycles per Hour

NICE specifies approximately 41 cycles/hour at nominal force for the TO7024.

The real operating frequency can be lower depending on gate size, gate weight, environmental temperature, wind exposure and mechanical resistance.

For high-frequency installations, the complete application should therefore be calculated rather than assuming 41 cycles/hour under every condition.

Long 584 mm Actuator Travel

The TO7024 provides approximately 584 mm of actuator travel.

The long stroke is specifically designed for the geometry required by very large swing gate leaves and is shared with the large TOONA 6 platform.

Magnetic Encoder

The NICE TO7024 includes an integrated magnetic encoder. This sends movement information to the compatible electronic control unit, enabling precise position and movement management.

Encoder feedback is particularly important on a large gate because it allows the control system to monitor motor movement accurately during opening and closing.

Obstacle Detection

When connected to the NICE MC824H and correctly configured, encoder feedback supports advanced obstacle-detection functions.

If abnormal resistance is detected during movement, the control system can react according to its programmed safety logic.

Encoder-based force monitoring does not replace photocells or other safety devices required for the installation.

Mechanical Stops for Opening & Closing

The NICE TO7024 is equipped with mechanical stops for both opening and closing.

These stops are adjusted during professional installation to establish the physical travel limits, after which the electronic control system can learn and manage the gate positions.

NICE MC824H Control Unit

The correct control platform for the NICE TO7024 is the NICE MC824H 24V swing gate control unit.

The MC824H can manage one or two compatible TO7024 motors and provides advanced programming, BlueBUS connectivity, position learning, obstacle detection and radio-control integration.

Automatic Gate Position Learning

The MC824H system can perform automatic learning of gate opening and closing positions during commissioning.

Programming should only be completed once the gate, motors, mounting brackets, mechanical stops and safety devices have been correctly installed.

NICE BlueBUS Technology

When TO7024 is used with MC824H, compatible NICE safety devices can connect through BlueBUS two-wire technology.

BlueBUS simplifies wiring by allowing compatible devices to receive power and communicate through the same two wires.

Important EPM vs EPMB Difference

NICE EPM is not a BlueBUS photocell.

If your TO7024 package contains conventional EPM photocells, list them as:

NICE EPM Safety Photocells

If your package contains the BlueBUS version, list:

NICE EPMB BlueBUS Safety Photocells

Do not write “EPM BlueBUS.”

Programmable Acceleration & Slowdown

The compatible NICE 24V control system provides electronic acceleration and slowdown management.

This is especially valuable for large swing gates because slowing the gate before the final opening and closing positions helps reduce mechanical shock to the gate, hinges, posts and motor brackets.

Pedestrian Opening

The MC824H can be programmed to provide a pedestrian opening function, allowing partial gate opening where full vehicle access is unnecessary.

This feature is useful for residential compounds, commercial premises and large properties where the same gate is used for vehicles and pedestrians.

Automatic Closing

The TO7024 automation can be configured for automatic closing after a programmed pause period using the compatible control unit.

Photocells and all required safety devices should be professionally installed and tested before automatic closing is enabled.

Optional PS324 Battery Backup

The NICE MC824H system supports the optional NICE PS324 24V backup battery.

If mains power fails, the battery can provide temporary operation of the gate depending on battery condition, gate load and system configuration.

Electric Lock Required for Leaves Above 3 M

For very long swing gate leaves, NICE specifies an electric lock as mandatory for leaves longer than 3 metres.

NICE lists compatible accessories including:

• PLA10 – 12V vertical electric lock
• PLA11 – 12V horizontal electric lock

This is especially important with TO7024 because the motor is intended for leaves extending far beyond 3 metres.

Durability & Demand Index

NICE estimates TOONA product durability between approximately 80,000 and 250,000 manoeuvre cycles, depending on installation severity.

The manufacturer's demand calculation considers factors including gate weight, gate length, temperature, humidity, solid gate construction and wind exposure.

UAE Temperature & Environmental Conditions

NICE lists the operating temperature for TO7024 as -20°C to +50°C.

The official durability calculation increases the demand index when ambient temperature exceeds 40°C or when humidity exceeds 80%. These factors are especially relevant when designing gate automation for UAE outdoor installations.

Solid Gate & Wind Considerations

NICE also increases its demand index for blind or solid gate leaves and for installations in windy areas.

This is particularly important with 5 m, 6 m or 7 m gates. A large solid-panel gate can experience extremely high wind pressure even when its physical weight is within the motor's weight-versus-length operating graph.

NICE TO7024 Recommended Double Gate Package

• 2 × NICE TOONA 7 TO7024 24V Swing Gate Motors
• 1 × NICE MC824H 24V Control Unit
• 1 × Compatible NICE Radio Receiver
• 2 × Compatible NICE Remote Controls
• 1 Pair × NICE EPMB BlueBUS Photocells
• 1 × NICE Flashing Warning Light
• 2 × Motor Mounting Bracket Sets
• 1 × Electric Lock for Leaves Above 3 M where required
• 1 × Push Button if supplied by seller

Important: TO7024 is an individual motor model. Remote controls, receiver, photocells, flashing light, electric lock and push button should only be described as included when they are actually part of the UAE seller package.

NICE TO7024 Compatible Accessories

• NICE MC824H control unit
• NICE OXI / OXIBD compatible receiver
• NICE remote controls
• NICE EPMB BlueBUS photocells
• NICE EPLB BlueBUS photocells
• NICE F210B BlueBUS photocells
• NICE flashing warning light
• NICE PS324 backup battery
• NICE PLA10 electric lock
• NICE PLA11 electric lock
• Compatible safety edges
• Key selector
• Push button
• GSM gate opener
• RFID access control
• Intercom system

NICE TO7024 Applications

• Large villa swing gates
• Luxury residential entrances
• Residential compounds
• Commercial entrances
• Factories
• Warehouses
• Industrial compounds
• Institutional entrances
• Large private driveway gates
• Large steel swing gates
• Aluminium swing gates
• Single-leaf swing gates
• Double-leaf swing gates
• Gate leaves up to approximately 7 metres

NICE TO7024 for Large Villas UAE

The NICE TOONA 7 TO7024 is an excellent option for large UAE villa entrances where gate leaves are too long or heavy for conventional residential swing gate motors.

Its strong 2700 N peak force, 24V electronic architecture and long 584 mm actuator stroke provide a professional solution for demanding entrance gates.

Commercial & Industrial Gate Automation

NICE TOONA motors are designed for swing gate automation in both residential and industrial applications when selected within their operating limits.

The TO7024 is particularly suitable for commercial and industrial entrances requiring a long surface-mounted linear actuator, but the expected daily operating frequency must still be checked against the actual gate size and demand index.

Professional NICE TO7024 Installation UAE

Professional installation of the NICE TOONA 7 TO7024 swing gate motor is available throughout the UAE.

Installation can include gate inspection, motor bracket positioning, MC824H control-panel installation, electrical wiring, BlueBUS photocells, electric lock integration, flashing light, radio receiver, remote programming, travel learning, obstacle-detection adjustment, slowdown programming and complete safety testing.

Installation Checks Before Fitting TO7024

• Measure each gate leaf accurately
• Confirm actual gate leaf weight
• Check the official NICE weight-versus-length graph
• Inspect hinges and bearings
• Ensure the gate moves smoothly by hand
• Check gate-post structural strength
• Calculate correct front and rear mounting geometry
• Confirm required opening angle
• Assess wind pressure and gate surface area
• Install an electric lock for leaves over 3 m where specified
• Set opening and closing mechanical stops
• Install appropriate BlueBUS safety photocells
• Configure encoder obstacle detection correctly
• Program acceleration and slowdown
• Test manual release and emergency operation

NICE TO7024 Repair & Spare Parts UAE

Technical support is available for NICE TO7024 repair, programming, maintenance and spare parts throughout the UAE.

Compatible service parts can include actuator mechanical components, magnetic encoder components, manual-release parts, mounting brackets, MC824H control units, NICE radio receivers, remote controls, BlueBUS photocells, flashing lights, electric locks and PS324 backup batteries.

NICE TO7024 vs TO6024HS

Specification	TO6024HS	TO7024
Series	TOONA 6 Hi-Speed	TOONA 7
Power Supply	24V DC	24V DC
Maximum Leaf Length	Up to 6 m	Up to 7 m
Maximum Force	2200 N	2700 N
Nominal Force	1200 N	1400 N
No-Load Speed	0.016 m/s	0.013 m/s
Cycles / Hour	41	41
Travel	584 mm	584 mm
Encoder	Magnetic	Magnetic
Recommended Controller	MC824H	MC824H

Choose TO6024HS when faster movement is important for compatible gates up to approximately 6 metres. Choose TO7024 when maximum gate-leaf length and greater 2700 N force are more important.

NICE TO7024 vs TOONA 5

The TOONA 5 range is designed primarily for gate leaves up to approximately 5 metres depending on the exact model.

The TO7024 extends the TOONA platform to gate leaves up to approximately 7 metres and uses a substantially larger actuator body with 584 mm stroke and 2700 N maximum force.

Why Choose NICE TOONA 7 TO7024?

• Large NICE TOONA swing gate operator
• Suitable for gate leaves up to approximately 7 metres
• 24V DC motor technology
• 2700 N maximum force
• 1400 N nominal force
• 120 W maximum power
• 0.013 m/s actuator speed
• 41 cycles/hour at nominal force
• 584 mm long actuator travel
• Magnetic encoder
• Mechanical opening and closing stops
• Encoder-based obstacle detection
• NICE MC824H control-unit compatibility
• BlueBUS safety-device support
• Programmable acceleration and slowdown
• Optional PS324 battery backup
• Suitable for large residential and industrial gates
• Professional UAE installation available

Buy NICE TOONA 7 TO7024 Gate Motor UAE

Buy the NICE TOONA 7 TO7024 24V swing gate motor in UAE for professional automation of very large residential, commercial and industrial swing gates with leaves up to approximately 7 metres.

Contact us for product availability, UAE delivery, professional installation, programming, repair, maintenance and NICE spare parts across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE TO7024?
TO7024 is a 24V DC electromechanical linear swing gate motor from the NICE TOONA 7 series with magnetic encoder.

What is the maximum gate leaf length?
NICE officially specifies compatible swing gate leaves up to approximately 7 metres.

What is the maximum gate weight?
There is no single maximum KG figure that applies at every leaf length. NICE uses a weight-versus-length operating graph, with allowable gate weight reducing as the leaf becomes longer.

Can TO7024 handle a very heavy 7 metre gate?
The gate must be checked against NICE's operating-limit graph. A weight permitted on a shorter gate cannot automatically be applied to a full 7 metre leaf.

What voltage is NICE TO7024?
The motor operates from 24V DC.

What is the maximum motor power?
NICE specifies approximately 120 W maximum and 60 W nominal absorbed power.

What is the maximum force?
TO7024 provides approximately 2700 N maximum force and 1400 N nominal force.

How fast is NICE TO7024?
The published no-load linear actuator speed is approximately 0.013 m/s.

How many cycles per hour can TO7024 perform?
NICE specifies approximately 41 cycles/hour at nominal force.

What is the actuator travel?
The TO7024 has approximately 584 mm travel.

Does TO7024 have an encoder?
Yes. It includes a magnetic encoder.

Does TO7024 have mechanical stops?
Yes. NICE specifies mechanical stops for both opening and closing.

What control board should be used with TO7024?
The correct NICE control platform is the MC824H.

Can I use MC800 with TO7024?
MC800 should not be listed as the normal controller for TO7024. TO7024 is a 24V motor and NICE's official programming documentation pairs it with MC824H.

Does TO7024 support BlueBUS?
Yes, through the compatible MC824H control unit and BlueBUS accessories such as EPMB photocells.

Does TO7024 support battery backup?
Yes. The MC824H system supports the optional NICE PS324 backup battery.

Does a 7 metre gate need an electric lock?
Yes. NICE specifies an electric lock for swing gate leaves longer than approximately 3 metres.

Is TO7024 suitable for industrial gates?
Yes, when gate dimensions, weight, usage and environmental conditions comply with NICE operating limits.

Do you provide NICE TO7024 installation in UAE?
Yes. Professional installation, programming, maintenance and repair support is available throughout the UAE.