NICE SUMO SU2000 Industrial Sectional Door Motor – Up to 35 m²

NICE SU2000 24V Industrial Sectional Door Operator UAE

The NICE SUMO SU2000 is a professional 24V DC industrial sectional door operator designed for sectional doors and compatible two-leaf sliding doors with a surface area up to approximately 35 m². NICE positions the SUMO range specifically for commercial and industrial applications requiring powerful, compact and reliable shaft-mounted automation.

The SU2000 delivers up to approximately 120 Nm maximum torque with a maximum speed of approximately 16 rpm. It incorporates a magnetic encoder for precise movement feedback, eliminating the need for conventional mechanical limit-switch adjustment.

The motor operates from 24V DC and is designed to work with a compatible external NICE control unit such as the DPRO924. This allows professional management of opening, closing, safety devices, obstacle detection, access control and radio-control functions.

NICE SUMO SU2000 Key Features

• Professional NICE industrial sectional door motor
• Official model: SU2000
• NICE SUMO series
• Suitable for sectional doors up to approximately 35 m²
• Suitable for compatible two-leaf sliding doors
• Designed for commercial and industrial applications
• 24V DC electromechanical gearmotor
• Maximum current absorption: 13 A
• Maximum power: 500 W
• Maximum torque: 120 Nm
• Maximum speed: approximately 16 rpm
• Magnetic encoder
• No conventional limit-switch adjustment required
• Compact shaft-mounted design
• 50% duty-cycle rating
• IP44 protection
• Operating temperature: -20°C to +50°C
• Compatible with NICE DPRO924 control unit
• Manual emergency release
• Compatible with NICE safety devices
• Compatible with radio receivers and remote controls
• Suitable for warehouses, factories and commercial garages

NICE SU2000 Technical Specifications

Brand	NICE
Series	SUMO
Model	SU2000
Product Type	Industrial Electromechanical Sectional Door Operator
Maximum Door Surface Area	Up to 35 m²
Door Types	Sectional Doors & Compatible Two-Leaf Sliding Doors
Motor Power Supply	24V DC
Maximum Current Absorption	13 A
Maximum Power	500 W
Maximum Torque	120 Nm
Maximum Speed	Approx. 16 rpm
Speed Range	Approx. 7.5–16 rpm
Encoder	Magnetic Encoder
Limit Switch Adjustment	Not Required – Position Managed by Encoder
Duty Cycle	50%
Protection Rating	IP44
Operating Temperature	-20°C to +50°C
Dimensions	Approx. 110 × 350 × 270 mm
Weight	Approx. 10.5 KG
Output Shaft Hole	Approx. 25.5 mm
Recommended Control Unit	NICE DPRO924
Installation	Shaft / Side Mounted

Industrial Sectional Doors Up to 35 m²

The NICE SU2000 is officially designed for sectional doors with a maximum surface area of approximately 35 square metres.

This makes it significantly larger in capacity than residential garage motors such as NICE SPINBUS or SOON SO2000.

Door suitability must still consider correct balancing, shaft dimensions, door construction, friction and the actual torque required to move the door.

Industrial & Commercial Use

NICE specifically positions the SUMO family for industrial and commercial sectional doors.

Typical installations include warehouses, factories, logistics buildings, commercial workshops, loading areas and multi-user parking entrances.

120 Nm Maximum Torque

The SU2000 provides up to approximately 120 Nm maximum torque.

This strong rotary output allows the motor to operate large correctly balanced sectional doors while maintaining a compact shaft-mounted format.

The maximum torque specification should not be treated as permission to automate a poorly balanced or mechanically damaged door.

500 W Maximum Motor Power

NICE specifies approximately 500 W maximum absorbed power for SU2000.

The maximum current absorption is approximately 13 A on its 24V DC motor supply.

24V DC Motor

The NICE SUMO SU2000 is a 24V DC electromechanical motor.

The motor itself should therefore not be connected directly to a 230V AC supply. A compatible control unit such as the NICE DPRO924 provides the required motor control and safety management.

External Control Unit

Unlike NICE SOON SO2000, which has integrated control electronics, the SUMO SU2000 should be described as a motor used with a separate compatible control unit.

For a modern UAE installation, the NICE DPRO924 is an appropriate controller for the SUMO 24V range.

Magnetic Encoder Technology

The SU2000 includes a magnetic encoder for accurate monitoring of the door position and motor movement.

This allows the compatible controller to determine movement and position electronically.

No Conventional Limit-Switch Adjustment

NICE specifically describes the SUMO family as requiring no conventional limit-switch adjustment.

The magnetic encoder provides positional feedback, simplifying commissioning compared with motors that require mechanical opening and closing limit switches to be manually adjusted.

Maximum Speed Around 16 rpm

The standard SU2000 is the normal-speed or lower-speed SUMO model, with an operating speed range up to approximately 16 rpm.

The actual door travel speed depends on shaft and drum diameter, door geometry, controller settings and mechanical load.

50% Duty Cycle

The current NICE technical specification lists a 50% duty cycle for SU2000.

This makes it suitable for repeated commercial and industrial operation, provided the complete installation remains within the manufacturer's load and temperature limits.

Duty cycle should not be interpreted as unlimited continuous operation.

IP44 Protection

The SU2000 has an IP44 protection rating.

It is designed for protected industrial-door installations but should not be treated as a fully waterproof outdoor operator.

Operating Temperature

NICE specifies an operating temperature range of approximately -20°C to +50°C.

In UAE installations, adequate ventilation and protection from excessive direct heat should be considered, especially in enclosed industrial premises.

Compact Shaft-Mounted Design

The SUMO motor mounts directly onto the sectional-door drive shaft or compatible transmission system.

Its compact body measures approximately 110 × 350 × 270 mm and weighs approximately 10.5 KG.

This makes installation possible in spaces where a large external chain operator or ceiling rail would be inconvenient.

25.5 mm Output Shaft Hole

The SU2000 has an output connection of approximately 25.5 mm.

The installer must verify compatibility with the sectional-door shaft or use the appropriate NICE adapter or transmission accessories where required.

Manual Emergency Release

The SUMO SU2000 includes a manual-release function so the door can be disconnected from the motor during maintenance or power failure.

NICE specifies that the release should only be operated when the door is stationary.

Important Door Balance Requirement

Before automation, the sectional door must move freely by hand and remain properly balanced.

NICE's installation procedure states that the door should be capable of manual movement without excessive force and should remain stationary when stopped at intermediate positions.

Broken springs, worn rollers, damaged tracks or excessive friction should be repaired before fitting the SU2000.

Obstacle Detection & Force Management

With a compatible control unit correctly configured, motor force and anti-crushing behaviour can be adjusted according to the door installation.

Safety force should be set only as high as necessary to move the door reliably.

Photocells, safety edges and other required safety devices remain necessary according to the risk assessment of the installation.

NICE DPRO924 Control Unit

The NICE DPRO924 is the professional 24V controller commonly paired with SUMO operators such as SU2000.

The complete control system can manage opening and closing commands, safety inputs, motor movement, encoder feedback and compatible NICE accessories.

Compatible Access Control

The DPRO924-based SU2000 installation can be integrated with compatible dry-contact access-control systems such as:

• Push buttons
• Key switches
• Remote controls
• RFID access systems
• GSM gate or door openers
• Loop detectors where appropriate
• Intercom systems

Safety Photocells

Compatible safety photocells can be connected through the selected control system to detect vehicles or objects in the sectional-door movement area.

Photocells should be correctly positioned and tested during commissioning.

Safety Edge Compatibility

For large industrial sectional doors, an appropriate bottom safety edge is strongly recommended where required by the door design and safety assessment.

The exact edge type and interface must match the selected controller.

Push Button Control

A professional industrial-door installation can be configured with separate or sequential push-button controls depending on the controller setup.

Typical commands may include:

• OPEN
• STOP
• CLOSE

This is particularly useful in warehouses and loading areas where local wall-mounted controls are preferred.

Radio Remote Control

The SU2000 can be operated by NICE remote controls through a compatible NICE radio receiver connected to the external control unit.

The exact transmitter model should match the receiver physically supplied with your UAE package.

Do Not List Built-In Receiver Unless Supplied

The SU2000 motor itself should not be advertised as containing a built-in radio receiver unless the specific control package actually includes one.

If you supply FLO2RE remotes with the product, list them as part of your UAE seller package.

Recommended SU2000 UAE Package

• 1 × NICE SUMO SU2000 Industrial Door Motor
• 1 × NICE DPRO924 Control Unit
• 1 × Compatible NICE Radio Receiver
• 2 × Compatible NICE Remote Controls if supplied
• 1 × Industrial Open / Stop / Close Push Button
• 1 Pair × Safety Photocells
• 1 × Safety Edge Interface where required
• Mounting & Shaft Accessories
• Installation Manual

Important: The motor, controller, remote controls, photocells and push button may be sold separately. Only describe them as a complete kit when they are physically included in your UAE package.

NICE SU2000 Applications

• Industrial sectional doors
• Commercial sectional doors
• Warehouse entrances
• Factory doors
• Loading-bay sectional doors
• Logistics facilities
• Industrial workshops
• Multi-user parking facilities
• Commercial garages
• Two-leaf sliding doors
• Sectional doors up to approximately 35 m²

Warehouse Door Automation UAE

The NICE SUMO SU2000 is particularly suitable for warehouses and commercial premises requiring a compact shaft-mounted operator for large sectional doors.

Its 120 Nm maximum torque, 24V DC architecture and encoder feedback provide a strong professional automation solution.

Factory & Industrial Applications

The SU2000 is suitable for industrial environments where the sectional door size and expected operating frequency fall within NICE's official operating limits.

For faster doors or different operating requirements, other SUMO variants may be more suitable.

NICE SU2000 vs SU2000V vs SU2000VV

Model	Main Characteristic	Maximum Door Area
SU2000	Standard / Lower Speed	Up to 35 m²
SU2000V	Fast Version	Up to 25 m²
SU2000VV	Super-Fast Version	Up to 15 m²

Choose SU2000 when maximum door capacity is the priority. Choose SU2000V or SU2000VV when higher speed is required and the sectional door is within the lower surface-area limits.

NICE SU2000 vs SU2010

Feature	SU2000	SU2010
Maximum Door Area	Up to 35 m²	Up to 35 m²
Protection Rating	IP44	IP54
Application	Industrial / Commercial	Industrial / Commercial
Motor Architecture	24V DC	24V DC
Encoder	Magnetic	Magnetic

Choose SU2010 where the higher IP54 protection is required. Choose SU2000 for protected installations where IP44 is sufficient.

NICE SU2000 vs SOON SO2000

Feature	SUMO SU2000	SOON SO2000
Maximum Door Area	Up to 35 m²	Up to 20 m²
Main Application	Industrial / Commercial	Large Residential / Commercial
Motor Voltage	24V DC	Integrated Operator System
Encoder	Magnetic	Absolute Encoder
Control Unit	External DPRO924	Integrated
Torque	120 Nm Max	50 Nm Max

The SUMO SU2000 is the better choice for larger commercial and industrial sectional doors up to approximately 35 m². The SOON SO2000 is intended for smaller sectional doors up to approximately 20 m² and has an integrated controller.

Professional NICE SU2000 Installation UAE

Professional installation of the NICE SUMO SU2000 industrial sectional door motor is available throughout the UAE.

Installation can include sectional-door inspection, shaft compatibility check, motor mounting, DPRO924 control-panel installation, encoder setup, open/stop/close push button, photocells, safety edge, radio receiver, remote programming and complete commissioning.

Installation Checks Before Fitting SU2000

• Measure sectional door width and height
• Calculate total door surface area
• Confirm area does not exceed 35 m²
• Inspect door counterbalance springs
• Check rollers and tracks
• Confirm smooth manual movement
• Check door remains balanced when stopped
• Confirm shaft diameter and compatibility
• Check motor mounting clearance
• Install appropriate external controller
• Install safety photocells
• Install safety edge where required
• Set motor force correctly
• Verify encoder positioning
• Test manual release
• Test all safety devices before handover

Professional Safety Testing

NICE requires the complete automation system to be tested by qualified personnel after installation.

The sectional door should move freely by hand, remain balanced, have secure mechanical components and correctly functioning safety devices before automatic operation is commissioned.

NICE SU2000 Repair & Spare Parts UAE

Technical support is available for NICE SU2000 repair, maintenance, programming and spare parts throughout the UAE.

Service parts and accessories can include SUMO motor components, magnetic encoder parts, manual-release components, DPRO924 control units, radio receivers, NICE remote controls, photocells, safety-edge interfaces, shaft adapters and mounting accessories.

Why Choose NICE SUMO SU2000?

• Designed for industrial and commercial sectional doors
• Suitable for doors up to approximately 35 m²
• 24V DC motor technology
• 500 W maximum power
• 120 Nm maximum torque
• Maximum speed around 16 rpm
• Magnetic encoder
• No conventional limit-switch adjustment required
• 50% duty-cycle rating
• Compact shaft-mounted design
• IP44 protection
• Compatible with DPRO924
• Suitable for warehouses, factories and commercial garages
• Professional UAE installation available

Buy NICE SUMO SU2000 Industrial Door Motor UAE

Buy the NICE SUMO SU2000 industrial sectional door motor in UAE for professional automation of large commercial, warehouse and industrial sectional doors up to approximately 35 m².

Supply, installation, programming, maintenance and repair support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE SU2000?
SU2000 is a 24V DC industrial sectional-door and two-leaf sliding-door motor from the NICE SUMO range.

What is the maximum sectional door area?
NICE specifies doors up to approximately 35 m².

Is SU2000 designed for residential garage doors?
Its primary application is commercial and industrial sectional-door automation. It may be used in suitable large multi-user garage installations, but it should not be marketed mainly as a normal residential garage motor.

Can SU2000 automate up-and-over doors?
NICE officially positions SUMO for sectional doors and compatible two-leaf sliding doors. Do not advertise up-and-over compatibility unless a specific approved mechanical arrangement is confirmed.

What voltage is NICE SU2000?
The motor operates from 24V DC through a compatible external control unit.

What is the maximum power?
Approximately 500 W.

What is the maximum torque?
Approximately 120 Nm.

What is the maximum speed?
Approximately 16 rpm.

What is the duty cycle?
The current NICE technical specification lists approximately 50%.

Does SU2000 have an encoder?
Yes. It has an integrated magnetic encoder.

Does SU2000 require mechanical limit-switch adjustment?
No. NICE describes SUMO as operating without conventional limit-switch adjustment because position information is supplied by the magnetic encoder.

Does SU2000 have a built-in control board?
No. Unlike SOON SO2000, the SUMO SU2000 is normally used with a separate compatible control unit such as DPRO924.

What is the protection rating?
SU2000 is rated IP44.

What is the difference between SU2000 and SU2010?
Both can automate doors up to approximately 35 m², but SU2010 has the higher IP54 protection rating.

What is the difference between SU2000 and SU2000V?
SU2000 prioritizes maximum door size up to 35 m². SU2000V is faster but is intended for doors up to approximately 25 m².

Do you provide NICE SU2000 installation in UAE?
Yes. Professional installation, programming, repair and maintenance support is available throughout the UAE.