NICE THOR 1500 THOR1500KCE Sliding Gate Motor Kit – 1500 KG

NICE TH1500 Heavy-Duty Automatic Sliding Gate Motor UAE

The NICE THOR 1500 TH1500 / THOR1500KCE is a powerful 230V heavy-duty automatic sliding gate motor designed for gates weighing up to 1500 KG and measuring up to 12 metres in length. Built for demanding residential, commercial and industrial entrances, the THOR 1500 combines strong electromechanical construction, an integrated NICE ROA37 control unit and dependable gate automation technology.

With 350 W power absorption, up to 500 W peak power, 35 Nm maximum torque and up to 1100 N maximum force, the NICE TH1500 sliding gate motor is suitable for large villa gates, residential compounds, warehouses, factories, commercial buildings and controlled vehicle entrances throughout the UAE.

NICE THOR 1500 TH1500 Key Features

• Heavy-duty automatic sliding gate motor
• Suitable for sliding gates weighing up to 1500 KG
• Maximum gate leaf length up to 12 metres
• 230V AC single-phase asynchronous motor
• 350 W maximum normal power absorption
• Peak power up to 500 W
• Maximum torque: 35 Nm
• Maximum corresponding force: 1100 N
• Nominal torque: 12 Nm
• Nominal corresponding force: 360 N
• Nominal gate speed: 0.16 m/s
• Up to 15 operating cycles per hour with a 6 m gate
• Maximum 5 consecutive cycles under specified conditions
• Integrated NICE ROA37 control unit
• Integrated compatible radio receiver system
• Electronic clutch / force adjustment
• Automatic closing function
• Photocell-controlled closing function
• Electromechanical limit switches
• Manual emergency release
• Steel and bronze transmission gears
• 140°C thermal motor protection
• IP44 protection rating

NICE TH1500 Technical Specifications

Heavy-Duty 1500 KG Sliding Gate Automation

The NICE THOR 1500 TH1500 is designed for large and heavy sliding gates where a smaller residential gate motor may not provide sufficient capacity. With a maximum rated gate weight of 1500 KG and maximum leaf length of 12 metres, it is suitable for many demanding residential, commercial and industrial entrances.

The motor provides up to 35 Nm maximum torque, corresponding to approximately 1100 N maximum force. This provides strong starting performance for compatible heavy sliding gates when the gate track, wheels and mechanical components are correctly installed and maintained.

350 W Motor with 500 W Peak Power

The NICE TH1500 uses a 230V AC single-phase asynchronous motor. NICE specifies a maximum absorbed power of approximately 350 W, with peak power reaching approximately 500 W.

This distinction is important when comparing THOR 1500 specifications. The product should not simply be described as a 500 W continuous motor; 350 W is the specified power absorption and 500 W is the peak value.

NICE ROA37 Integrated Control Unit

The NICE THOR 1500 uses the NICE ROA37 integrated electronic control unit. This control board manages opening and closing commands, automatic closing, photocell safety logic, motor force adjustment and compatible radio-control functions.

The ROA37 provides a straightforward and reliable control solution for this 230V heavy-duty sliding gate operator.

Electronic Clutch & Anti-Crushing Protection

The THOR 1500 control system provides electronic motor-force adjustment. Correct adjustment allows the installer to set appropriate gate operating force according to the gate weight, mechanical resistance and site conditions.

The electronic clutch contributes to anti-crushing protection; however, it should always be combined with correctly installed safety devices such as photocell sensors. Motor force should never be increased simply to overcome a mechanically damaged or badly aligned gate.

0.16 m/s Gate Speed

The NICE TH1500 has a nominal sliding gate speed of approximately 0.16 metres per second. This provides controlled movement suitable for heavy gates where strength, durability and reliable operation are more important than high-speed opening.

For gates where very high opening speed is required, a dedicated NICE high-speed operator should be considered instead of selecting THOR 1500 solely on gate weight.

Operating Frequency

NICE specifies a maximum operating frequency of approximately 15 cycles per hour with a 6-metre gate, with a maximum of approximately 5 consecutive operating cycles under the specified test conditions.

The actual permissible duty depends on gate length, weight, mechanical resistance, ambient temperature and installation conditions. Applications with very intensive traffic should be professionally assessed before motor selection.

Electromechanical Limit Switches

The NICE THOR 1500 gate motor uses electromechanical limit switches to establish the fully open and fully closed gate positions.

Correct positioning of the opening and closing limit brackets is essential for reliable stopping and long-term operation. The limit switches should be adjusted carefully during installation and checked during routine maintenance.

Automatic Closing Function

The integrated THOR control system supports automatic closing. When correctly programmed, the gate can automatically close after the selected pause period instead of requiring a second manual command.

The pause time can be adjusted according to the installation requirements. Automatic closing should only be enabled after compatible safety devices have been correctly installed and tested.

Close After Photocell Function

The NICE TH1500 also supports closing logic linked to photocell operation. This can allow the gate to close after a vehicle has passed through the protected photocell area, depending on the configured control logic.

This feature is useful for vehicle entrances where the gate should remain open only as long as necessary.

Manual Emergency Release

The NICE THOR 1500 includes a strong manual release mechanism made with a practical die-cast aluminium key-release system. The motor can be disengaged so that the sliding gate can be operated manually during a mains power failure, maintenance or emergency.

The release mechanism should remain accessible to authorized users after installation.

Steel & Bronze Internal Gears

The NICE THOR 1500 is engineered for durability with robust transmission components manufactured using steel and bronze alloys. These strong internal components are suited to the higher mechanical loads associated with heavy sliding gates.

Correct rack alignment, motor positioning and regular gate maintenance are nevertheless essential for achieving reliable long-term operation.

140°C Thermal Motor Protection

The TH1500 motor incorporates 140°C thermal protection. This helps protect the motor against excessive temperature during demanding operating conditions.

Thermal protection should not be treated as a substitute for correct motor sizing. Gate weight, leaf length and operating frequency must remain within the manufacturer's specified limits.

NICE TH1500 Compatible Accessories

• NICE compatible remote controls
• NICE 433.92 MHz radio controls
• NICE EPM photocell sensors
• NICE flashing warning lights
• Push button switches
• Key selector switches
• Nylon gate gear racks
• Steel gate gear racks
• GSM gate opener systems
• Wi-Fi gate controllers
• RFID access control systems
• UHF long-range RFID readers
• Vehicle loop detectors
• Intercom and vehicle access systems

NICE THOR1500KCE Package

• 1 × NICE TH1500 Sliding Gate Motor
• 1 × NICE ROA37 Integrated Control Unit
• 2 × NICE Remote Controls
• 1 × NICE EPM Photocell Pair
• 1 × Compatible NICE Radio Receiver / Radio System
• 1 × Flashing Warning Light
• 4 × 1 Metre Nylon Gear Rack Sections
• 1 × Push Button

Note: Package contents can vary according to stock and the kit configuration being supplied. Confirm the exact remote controls, radio receiver, photocells, flashing light and rack quantity before ordering.

NICE THOR 1500 Applications

• Heavy villa sliding gates
• Residential compounds
• Apartment building entrances
• Commercial sliding gates
• Warehouses and logistics facilities
• Factory entrances
• Industrial sliding gates
• Business premises
• Private parking entrances
• Controlled vehicle access gates
• Heavy sliding gates up to 1500 KG
• Sliding gates up to 12 metres long

NICE THOR 1500 for Villas UAE

The NICE THOR 1500 1500 KG sliding gate motor can be an excellent choice for large UAE villa gates that exceed the capacity of smaller residential motors. Its strong 230V electromechanical design provides dependable automation for heavy residential entrance gates.

Before choosing the motor, the gate should be checked for actual weight, leaf length, wheel condition, track alignment and rolling resistance. A gate that is difficult to move manually should be mechanically repaired before automation is installed.

NICE TH1500 for Commercial & Industrial Gates

The NICE TH1500 heavy-duty gate motor is well suited to compatible commercial and industrial entrances including warehouses, factories, compounds and controlled vehicle access points.

Its 1500 KG gate capacity, strong steel and bronze transmission and 1100 N maximum force make it suitable for demanding applications where dependable heavy-gate movement is required.

NICE THOR 1500 vs ROBUS 1000

The NICE THOR 1500 and NICE ROBUS 1000 target different requirements. THOR 1500 is a conventional heavy-duty 230V motor for gates up to 1500 KG, while ROBUS 1000 is designed for gates up to 1000 KG and uses 24V motor technology with NICE BlueBUS and more advanced electronic functions.

If the main requirement is additional gate weight capacity, THOR 1500 offers the higher 1500 KG rating. If advanced 24V automation functions and BlueBUS integration are more important, ROBUS may be the preferred system depending on the gate.

Professional NICE TH1500 Installation UAE

Professional installation of the NICE THOR 1500 TH1500 sliding gate motor is available throughout the UAE. Installation can include gate inspection, motor mounting, gear rack installation, electromechanical limit-switch adjustment, photocell installation, control-board setup and remote-control programming.

After installation, the system should be tested for opening and closing movement, stopping positions, photocell operation, motor force, automatic closing, remote-control operation and manual emergency release.

NICE TH1500 Repair & Spare Parts UAE

Technical support is available for NICE THOR 1500 repair, programming, maintenance and spare parts. Common compatible components can include the NICE ROA37 control board, remote controls, photocells, radio components, capacitors, limit-switch parts, flashing lights and gate gear racks.

Professional fault diagnosis is recommended before replacing electrical or mechanical components.

Why Choose NICE THOR 1500?

• Heavy-duty NICE sliding gate automation
• Suitable for gates up to 1500 KG
• Supports gate leaves up to 12 metres
• 230V single-phase motor
• 350 W power absorption
• 500 W peak power
• Up to 35 Nm maximum torque
• Up to 1100 N maximum force
• Integrated NICE ROA37 control unit
• Electronic clutch and force adjustment
• Automatic closing
• Photocell safety management
• Electromechanical limit switches
• Steel and bronze internal gears
• Manual emergency release
• IP44 outdoor protection
• Professional UAE installation available

Buy NICE THOR 1500 TH1500 Gate Motor UAE

Buy the NICE THOR 1500 TH1500 heavy-duty sliding gate motor in UAE for reliable residential, commercial and industrial gate automation. Contact us for product availability, UAE delivery, professional installation, programming, maintenance and NICE THOR gate motor spare parts.

Supply and installation support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is the maximum gate weight for NICE THOR 1500?
The NICE TH1500 is designed for compatible sliding gates weighing up to 1500 KG.

What is the maximum gate length for NICE TH1500?
The maximum specified gate leaf length is 12 metres.

What is the power of NICE THOR 1500?
NICE specifies approximately 350 W power absorption with up to 500 W peak power.

What is the maximum force of NICE TH1500?
The official specification gives a maximum torque of approximately 35 Nm, corresponding to approximately 1100 N maximum force.

What is the nominal force of NICE TH1500?
The nominal torque is approximately 12 Nm, corresponding to approximately 360 N nominal force.

How fast is NICE THOR 1500?
The nominal gate speed is approximately 0.16 m/s.

How many cycles per hour can NICE TH1500 perform?
NICE specifies up to approximately 15 cycles per hour with a 6-metre gate and a maximum of approximately 5 consecutive cycles under the stated operating conditions.

What control board does NICE THOR 1500 use?
The NICE TH1500 uses the NICE ROA37 integrated control unit.

Does NICE THOR 1500 use BlueBUS?
No. THOR 1500 is an older conventional 230V automation platform and should not be described as a BlueBUS motor.

What type of limit switch does NICE TH1500 use?
The TH1500 uses an electromechanical limit switch system.

Is NICE THOR 1500 suitable for commercial and industrial gates?
Yes. It is suitable for compatible heavy commercial and industrial sliding gates when gate weight, length and operating frequency remain within the manufacturer's specifications.

Do you provide NICE TH1500 installation in UAE?
Yes. Professional installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman and other UAE locations.

Are NICE THOR 1500 spare parts available in UAE?
Compatible spare parts and accessories including control boards, radio equipment, photocells, limit-switch components and gate racks can be supplied according to system requirements.