NICE AUTOMATION UAE
NICE ROA37 THOR 1500 Sliding Gate Control Board UAE
Genuine NICE Product
UAE Delivery
Technical Support
Price 580 AED In Stock
Original NICE ROA37 Replacement PCB for TH1500
The NICE ROA37 Control Board is an original replacement electronic control unit used with the NICE THOR 1500 / TH1500 sliding gate motor.
NICE official installer documentation specifically associates the TH1500 sliding gate operator with the ROA37 control unit. The ROA37 belongs to NICE's classic 230 V sliding gate automation platform and incorporates the main motor-control logic together with an integrated radio receiver.
The ROA37 controls opening and closing movement, electromechanical limit-switch operation, conventional photocell safety inputs, automatic closing, motor force, step-by-step commands, external access-control inputs and compatible NICE radio transmitters.
This replacement control board is suitable when the original ROA37 PCB has failed but the THOR 1500 motor, gearbox and mechanical gate components remain serviceable.
NICE ROA37 Key Features
- Original NICE replacement control board
- Model: ROA37
- Officially associated with NICE THOR 1500 / TH1500
- 230 V control architecture
- Integrated radio receiver
- Opening and closing motor control
- Electromechanical limit-switch management
- Automatic closing
- Step-by-Step command operation
- Conventional photocell safety inputs
- Motor-force adjustment
- Obstacle-sensitive operation when correctly configured
- External push-button integration
- Key-selector compatibility
- Access-control relay integration
- Suitable for TH1500 repair and servicing
NICE ROA37 Compatibility
| NICE Motor | ROA37 Compatibility |
| NICE THOR 1500 / TH1500 | Yes – Officially Documented |
| NICE RO500 | Historical NICE ROA37 Application |
| NICE RO1070 | Historical NICE ROA37 Application |
| NICE ROX600 | No – different ROA40/ROA41 platform depending generation |
| NICE ROBUS | No – different RBA control-board family |
| NICE RUN | No – different RUA control-board family |
Official THOR 1500 Application
NICE's installer documentation lists the THOR 1500 manual under the product codes TH1500 and ROA37.
For your UAE product page, the strongest and clearest product positioning is therefore:
NICE ROA37 Replacement Control Board for THOR 1500 / TH1500.
230 V Control Architecture
The THOR 1500 uses a 230 V motor and control architecture.
ROA37 should not be confused with the 24 V BlueBUS controllers used on newer NICE ROBUS systems.
ROA37 Is Not a BlueBUS Control Board
The ROA37 uses conventional accessory and safety wiring.
It should not be described as a standard NICE BlueBUS controller.
This is important when selecting photocells and other safety accessories.
NICE EPM Photocells
Official NICE compatibility data lists conventional photocell families including EPM for ROA37 applications.
EPM uses separate power wiring and relay contacts and is suitable for conventional safety-input wiring when correctly installed.
Do Not List EPMB as Direct BlueBUS Compatibility
The NICE EPMB is a BlueBUS photocell.
Because ROA37 is not a standard BlueBUS control board, EPMB should not be advertised as a direct BlueBUS accessory for this PCB.
Use:
Compatible with conventional NICE photocells such as EPM when correctly wired.
Integrated Radio Receiver
The NICE ROA37 architecture has an integrated radio receiver.
This means a separate plug-in radio receiver is not normally required for standard remote-control operation.
Compatible Remote Families
NICE catalogue information associates ROA37 with several historical and current-compatible transmitter families depending on the programmed receiver coding, including selected:
- ERA INTI
- ERA ONE
- ERA FLOR
- FLOR-S
- FLO
- SMILO
- NICEWAY
- Older NICE transmitter families
Remote compatibility still depends on the exact radio coding used by the installed ROA37.
433.92 MHz frequency alone does not guarantee compatibility.
Do Not List OXIBD as a Standard Direct Receiver
The ROA37 already incorporates its own radio receiver architecture.
Therefore, do not show OXIBD as if it is a standard plug-in receiver required by ROA37.
Do Not List OXIFM as Directly Compatible
The NICE OXIFM is an 868.46 MHz plug-in receiver intended for compatible NICE receiver sockets.
It should not be listed as a standard direct accessory for ROA37.
NICE OX2 External Receiver
The NICE OX2 is an external pre-wired receiver with relay outputs.
If a different radio system is required, an external receiver such as OX2 can potentially command the ROA37 through a suitable dry-contact input.
OX2 should be described as an optional external wired receiver, not as the built-in ROA37 receiver.
Flashing Light Compatibility
Official NICE compatibility data lists 230 V flashing-light families such as ELAC with ROA37-based automation.
The exact flashing-light connection must follow the THOR 1500 / ROA37 wiring specification.
NICE ELAC
The NICE ERA ELAC operates from 90–240 VAC and is the appropriate current NICE flashing-light family to mention for a 230 V ROA37 automation where correctly wired.
Do Not List ELDC as the Standard Direct Lamp
The NICE ELDC operates from 12–36 VDC.
It should not be presented as the standard direct warning lamp for the ROA37 unless an appropriate separate supply/interface arrangement is used.
Electromechanical Limit Switches
The THOR 1500 uses an electromechanical limit-switch arrangement.
The control board must correctly recognise the opening and closing travel limits.
After replacing the ROA37, always verify both limit switches before returning the automation to normal service.
Opening and Closing Commands
The ROA37 manages normal gate opening and closing commands using the THOR control logic.
A suitable wired push button, key selector or external access-control relay can operate the automation through the appropriate command terminals.
Step-by-Step Command
A normally-open momentary contact can be used for Step-by-Step control where configured.
Depending on the programmed logic, successive commands can operate functions such as:
- Open
- Stop
- Close
- Stop
Push Button Connection
A suitable normally-open push button can be connected to the appropriate low-voltage command input.
Never connect mains voltage directly to a low-voltage command terminal.
NICE EKS Key Selector
A conventional wired key selector such as the NICE ERA EKS can operate the ROA37 through its dry-contact switching output when correctly connected.
GSM Gate Opener Integration
A GSM gate opener can normally control the THOR 1500 using a momentary dry relay contact.
The relay should be connected to an appropriate control input such as Step-by-Step or OPEN where supported.
The GSM device must not directly power the THOR 1500 motor.
RFID Access Control
A suitable RFID controller can operate the gate using a dry relay contact.
This allows THOR 1500 to be integrated into residential, commercial or industrial access-control systems.
Intercom Integration
An intercom relay output can be connected to a suitable ROA37 command input to open the gate remotely.
Vehicle Loop Detector
A vehicle loop detector with an isolated relay output can be used for suitable opening or control logic.
The exact wiring should be selected so that safety devices remain effective and the gate cannot close onto a vehicle.
Automatic Closing
The ROA37 supports automatic-closing logic when correctly programmed.
Before enabling automatic closing, conventional photocells and other required safety devices must be correctly installed and tested.
Motor Force Management
The controller manages the operation of the THOR 1500 motor and allows operating force to be configured according to the installation.
Force should not be increased simply to compensate for a gate that is mechanically difficult to move.
Check Gate Mechanics Before Increasing Force
- Check sliding gate wheels
- Check track condition
- Check gate alignment
- Check rack-to-pinion engagement
- Check mechanical stops
- Check for excessive friction
- Check manual-release movement
Obstacle-Sensitive Operation
Any motor-load or obstacle response should only be relied upon when the system has been correctly configured and maintained.
Electronic force control does not replace photocells or other required safety devices.
THOR 1500 Motor Data
| Motor | NICE THOR 1500 / TH1500 |
| Maximum Gate Weight | 1500 KG |
| Maximum Gate Length | 12 M |
| Mains Supply | 230 VAC 50 Hz |
| Motor Power | 350 W maximum / approximately 500 W peak |
| Maximum Force | Approx. 1100 N |
| Maximum Torque | Approx. 35 Nm |
| Gate Speed | Approx. 0.16 m/s |
| Protection | IP44 for the complete TH1500 operator |
| Operating Temperature | Approx. -20°C to +50°C |
Important IP Rating Note
The IP44 rating applies to the complete THOR 1500 motor enclosure.
Do not advertise the loose ROA37 PCB itself as IP44 or waterproof.
UAE Installation Conditions
The ROA37 is designed to operate inside the compatible THOR 1500 enclosure.
For UAE installations, keep the motor housing properly closed and protect the PCB from water ingress, condensation, excessive dust and abnormal heat.
Do Not Claim the Bare PCB Is Built for Harsh UAE Weather
A replacement electronic control board should remain protected inside the operator housing.
The correct wording is:
Designed for installation inside the compatible NICE THOR 1500 enclosure. Protect the control board from direct moisture, condensation and excessive heat.
Check the Existing Board Before Ordering
Before purchasing an ROA37, confirm:
- Motor model: THOR 1500 / TH1500
- Existing PCB code
- Board revision
- 230 V motor system
- Limit-switch wiring
- Photocell wiring
- Radio remote type
Replacing a Failed ROA37 Board
- Disconnect mains power.
- Confirm the motor model and existing ROA37 PCB.
- Photograph all terminal connections.
- Label motor, capacitor, limit and safety wiring.
- Remove the old control board.
- Install the replacement ROA37.
- Reconnect motor and capacitor wiring.
- Reconnect opening and closing limits.
- Reconnect conventional photocells.
- Reconnect push buttons and access-control devices.
- Reconnect compatible flashing light.
- Program compatible remote controls.
- Verify opening direction.
- Verify closing direction.
- Verify both limit switches.
- Test photocells and safety devices.
- Check automatic closing where enabled.
- Perform multiple complete cycles before returning the gate to service.
Professional Installation Recommended
The ROA37 is used in a 230 V mains-powered gate automation system.
Replacement and programming should be carried out by a competent gate automation technician familiar with NICE THOR systems.
Gate Opens but Does Not Close
If the THOR 1500 opens but will not close, inspect:
- Photocell alignment
- PHOTO input
- Closing limit switch
- Automatic-closing programming
- STOP / safety input status
- External control wiring
Gate Does Not Move
Before replacing the ROA37, check:
- 230 V mains supply
- Control-board fuse
- Motor capacitor
- Motor winding
- Manual release
- Opening and closing limits
- Photocell status
- Gate mechanical resistance
Motor Hums but Does Not Start
A motor that hums without moving can be caused by a failed capacitor, mechanical obstruction, low supply voltage or motor problem.
Do not automatically replace the ROA37 until these items are checked.
Remote Control Does Not Work
If the gate operates from a wired button but not from the remote, check:
- Remote battery
- Remote coding
- Integrated receiver programming
- Aerial connection
- Compatible transmitter protocol
Water-Damaged Board
If the old PCB has water or corrosion damage, repair the cause of water entry before installing a replacement ROA37.
Package Contents
- 1 × NICE ROA37 Replacement Control Board
Remote controls, photocells, flashing light, key selector, capacitor, motor, cables and other accessories should only be listed as included when physically supplied with your product.
NICE ROA37 Control Board UAE
ROA37 replacement boards are suitable for repair and servicing of compatible NICE THOR 1500 sliding gate operators used at:
- Villa entrances
- Residential compounds
- Apartment buildings
- Commercial entrances
- Warehouses
- Industrial properties
NICE ROA37 Supply & Replacement UAE
Supply, replacement, programming and troubleshooting support for NICE ROA37 / THOR 1500 systems is available throughout Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Why Choose NICE ROA37?
- Official NICE control unit for TH1500
- Designed for classic 230 V THOR automation
- Integrated radio receiver
- Conventional photocell support
- Automatic-closing control
- Electromechanical limit-switch management
- External access-control integration
- Suitable for professional THOR 1500 repair
Buy NICE ROA37 Control Board UAE
Buy the NICE ROA37 control board in UAE for compatible NICE THOR 1500 / TH1500 sliding gate motors.
Before ordering, verify the motor model and existing PCB code to make sure ROA37 is the correct replacement controller.
Supply, professional replacement, programming and repair support are available throughout Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.
Frequently Asked Questions
What is NICE ROA37?
ROA37 is a NICE 230 V control unit officially documented with the THOR 1500 / TH1500 sliding gate motor.
Does ROA37 work with THOR 1500?
Yes. NICE's official installer documentation lists TH1500 together with ROA37.
Does ROA37 support BlueBUS?
No. ROA37 uses a conventional accessory wiring architecture rather than standard NICE BlueBUS.
Can I connect NICE EPM photocells?
Yes. NICE officially lists conventional EPM-type photocells among compatible accessory families for ROA37 systems.
Can I connect NICE EPMB directly?
EPMB is a BlueBUS photocell and should not be listed as a direct BlueBUS accessory for ROA37.
Does ROA37 have an integrated receiver?
Yes. NICE catalogue data identifies the ROA37 platform with an integrated radio receiver.
Do I need OXIBD?
Not for normal ROA37 radio operation. ROA37 has an integrated receiver architecture.
Can I use an external OX2 receiver?
An external wired receiver can potentially operate the gate through a dry-contact command input, but it is not the built-in ROA37 receiver.
Which flashing light should I use?
NICE compatibility documentation lists 230 V flashing-light families including ELAC for ROA37 applications. Always follow the exact TH1500 wiring specification.
Can I connect a push button?
Yes. A suitable normally-open dry contact can operate the appropriate command input.
Can I connect a GSM opener?
Yes. Use the GSM controller's dry relay contact to command an appropriate low-voltage input. Never use the GSM relay to directly power the gate motor.
Does the replacement ROA37 need programming?
Yes. Verify radio programming, limit-switch operation, motor direction, safety devices and automatic-closing settings after replacement.
Do you provide NICE ROA37 replacement in UAE?
Yes. Supply, installation, programming and troubleshooting support is available for compatible THOR 1500 systems throughout the UAE.
Frequently Asked Questions
Is this NICE product suitable for UAE installation?
Yes, this NICE product is suitable for residential, commercial and industrial gate automation applications in UAE when selected according to gate size, weight and usage.
Do you provide installation support?
Yes, installation and technical support is available in Dubai, Sharjah, Abu Dhabi and other UAE locations.
Can I order this product on WhatsApp?
Yes, you can use the WhatsApp order button on this page to request price, availability and delivery details.