Automatic Roller Swing Gate Opener Motor – 700 KG

700 KG Wheel Roller Swing Gate Motor UAE

The Automatic Roller Swing Gate Opener Motor 700 KG is a powerful wheel-type automatic gate system designed for swing gates that use ground-supported rollers or wheels. Unlike a conventional linear arm swing gate motor, the roller motor is installed near the bottom of the gate leaf and uses a powered wheel to move the gate smoothly during opening and closing.

The system is designed for compatible swing gates weighing up to approximately 700 KG and measuring up to approximately 3 metres per leaf. Its 24V DC motor, intelligent electronic control, soft start and soft stop functions, obstacle detection and automatic reverse make it a practical solution for villas, residential properties, commercial entrances and suitable industrial gates throughout the UAE.

Under suitable gate geometry and installation conditions, the roller swing gate opener can provide an opening angle of up to approximately 180 degrees, offering greater flexibility than many conventional linear swing gate motors.

Roller Swing Gate Motor Key Features

• Wheel-type automatic swing gate opener
• Maximum gate weight up to approximately 700 KG
• Maximum gate leaf width up to approximately 3 metres
• 24V DC motor technology
• 220V AC 50/60Hz input supply to control system
• Maximum opening angle up to approximately 180°
• Designed for wheel-supported swing gates
• Soft start and soft stop
• Obstacle detection
• Automatic reverse when resistance is detected
• Automatic closing function
• Single-leaf operation mode
• Remote-control operation
• Compatible with safety photocells
• Compatible with flashing warning light
• Manual emergency release
• Optional backup battery
• Suitable for single and double swing gate systems
• Professional UAE installation available

Roller Swing Gate Opener Technical Specifications

Product Type	Wheel Roller Swing Gate Opener
Maximum Gate Weight	Up to Approx. 700 KG
Maximum Gate Leaf Width	Up to Approx. 3 Metres
Input Supply	AC 220V, 50/60Hz
Motor Voltage	24V DC
Drive Type	Motorized Ground Roller Wheel
Maximum Opening Angle	Up to Approx. 180°
Soft Start	Yes
Soft Stop	Yes
Obstacle Detection	Yes – When Correctly Configured
Automatic Reverse	Yes
Automatic Closing	Yes
Single Gate Operation	Supported
Photocell Compatibility	Yes
Warning Light Compatibility	Yes
Manual Release	Yes
Backup Battery	Optional
Installation	Lower Gate / Ground Wheel Mounted

How Does a Roller Swing Gate Opener Work?

A roller swing gate motor works differently from a conventional linear actuator such as NICE WINGO or TOONA.

The motor assembly is installed near the bottom of the swing gate leaf. A powered rubber or traction wheel remains in contact with the ground surface. When an open or close command is received, the wheel rotates and physically drives the gate leaf around its hinge pivot.

This arrangement is particularly useful for heavy gates that already have a supporting ground wheel or where a conventional linear motor would create excessive load on the gate structure.

700 KG Gate Capacity

The roller swing gate opener is designed for compatible gates weighing up to approximately 700 KG.

The 700 KG capacity should not be considered alone. Gate leaf width, wheel condition, hinge condition, ground level, surface grip and gate balance must also be checked before installation.

A gate that is difficult to move manually should be repaired before automation is fitted.

Up to 3 Metres per Gate Leaf

The system is suitable for swing gate leaves measuring up to approximately 3 metres.

For a double-leaf gate, two roller motors can be fitted—one motor to each compatible leaf.

The 3 metre specification applies to each individual leaf rather than the total width of a double gate.

24V DC Motor Technology

The roller swing gate opener uses a 24V DC motor controlled through an electronic gate control board supplied from approximately 220V AC mains.

The low-voltage motor platform allows intelligent features such as soft start, soft stop, obstacle detection, automatic reverse and optional battery backup.

Up to 180° Gate Opening

One major advantage of a wheel-driven swing gate opener is the potential for a much wider opening angle than many conventional linear arm motors.

Under suitable installation geometry and with sufficient clear space, the roller gate motor can provide an opening angle of up to approximately 180 degrees.

The actual opening angle depends on the gate hinge, motor position, ground surface, surrounding walls and available clearance.

Soft Start & Soft Stop

The electronic control system supports soft start and soft stop operation.

Instead of immediately applying full movement speed, the motor can accelerate smoothly and reduce speed before stopping. This helps minimise sudden mechanical shock to the gate, hinges, wheel assembly and motor.

Obstacle Detection

When correctly programmed, the control system can detect increased resistance while the gate is moving.

If abnormal resistance or an obstacle is detected, the system can stop or reverse according to the configured safety logic.

Obstacle detection should not replace properly installed safety photocells or other safety devices required for the project.

Automatic Reverse Safety

The automatic reverse function improves protection by allowing the gate to reverse direction after detecting abnormal resistance.

The installer should test the force settings and safety response during commissioning rather than operating the system permanently at maximum force.

Automatic Closing Function

The control board can be programmed to close the gate automatically after a selected delay.

This is particularly useful for villa, residential and commercial entrances where the gate should automatically secure the property after vehicle access.

Safety photocells should always be correctly installed and tested when automatic closing is enabled.

Single-Leaf Operation

The electronic controller supports single-leaf operation when only one roller motor is required.

This allows the same type of system to be adapted for a single swing gate or configured as a two-motor double-leaf gate installation.

Remote Control Operation

The roller swing gate opener can be operated using compatible wireless remote controls connected to the supplied electronic receiver or integrated control system.

The exact transmitter model should match the receiver supplied with the actual product package.

Push Button Control

A wired push button can also be connected to the electronic control board for local gate operation.

Depending on the controller configuration, the command can be programmed for sequential Open – Stop – Close operation.

Safety Photocell Sensors

Infrared safety photocells can be installed across the driveway to detect vehicles or objects in the gate movement area.

If the photocell beam is interrupted during closing, the controller can prevent or reverse closing according to the programmed safety logic.

Flashing Warning Light

A flashing warning light can be connected to provide a visible indication while the automatic gate is opening or closing.

This is recommended for commercial entrances, warehouses and busy villa driveways where other people may approach the gate during operation.

Manual Emergency Release

The roller motor includes a manual release system for emergency gate operation.

If the automation cannot operate due to an electrical or mechanical problem, the motor can be released so the gate can be moved manually where safe to do so.

Optional Backup Battery

An optional backup battery can be added to compatible 24V control systems.

This allows limited gate operation during a mains power interruption, depending on battery capacity, condition and gate load.

Ground Surface Is Very Important

Because this motor drives the gate through a wheel in contact with the ground, the quality of the ground surface directly affects performance.

The travel path should be:

• Level enough for reliable wheel contact
• Strong and stable
• Free from deep holes and broken concrete
• Free from loose gravel where possible
• Properly drained
• Clean enough to provide reliable wheel traction

Wheel Traction & Gate Movement

The powered wheel must maintain suitable traction with the ground during the complete opening and closing movement.

Oil, sand, loose gravel, standing water or an excessively uneven surface can cause the wheel to slip and reduce gate movement accuracy.

Gate Hinges Still Matter

A ground roller does not eliminate the need for good gate hinges.

The hinge system still controls the rotational movement of the gate leaf. Damaged, misaligned or seized hinges can create excessive resistance and should be repaired before the automatic motor is installed.

Wheel-Supported Heavy Swing Gates

This motor is particularly useful where the swing gate has a supporting ground wheel that carries part of the gate load.

The wheel-supported design can reduce vertical load on the hinges compared with a heavy unsupported gate.

However, the complete gate structure must still be professionally assessed before installation.

Roller Motor vs Linear Swing Gate Motor

Feature	Roller Wheel Motor	Linear Arm Motor
Drive Method	Powered Ground Wheel	Linear Actuator Arm
Ground Contact	Required	Not Required
Heavy Gate Support	Good for Wheel-Supported Gates	Depends on Motor & Gate Geometry
Opening Angle	Up to Approx. 180°	Usually More Limited
Ground Quality	Very Important	Less Important
Installation Geometry	Wheel Position Critical	Bracket Geometry Critical

Roller Motor vs NICE WINGO

A conventional NICE WINGO motor uses a linear actuator mounted between the gate post and gate leaf, while the roller swing gate opener drives the gate using a powered wheel at ground level.

Choose a conventional linear motor when the gate geometry and hinge structure are suitable. Choose a roller-wheel system where ground-supported movement provides a better mechanical solution for the particular gate.

Roller Motor vs NICE TOONA

NICE TOONA motors are professional linear actuators for swing gates and are selected according to leaf length, weight and duty requirements.

A roller motor is a different mechanical concept and should not be described as a TOONA alternative based only on KG capacity. The correct choice depends on the actual construction of the gate and site.

Complete Roller Swing Gate Opener Kit

• 2 × Roller Wheel Swing Gate Motors
• 1 × Electronic Control Board
• 2 × Remote Controls
• 1 Pair × Safety Photocell Sensors
• 1 × Flashing Warning Light
• Motor Mounting Accessories
• Installation Accessories according to supplied package

Important: Package contents can vary. Only list accessories as included when they are physically supplied with your actual UAE stock.

Single Gate Installation

For a single-leaf swing gate, one wheel motor can be installed and the controller configured for single-motor operation where supported.

The second motor is not required unless the entrance has two independently moving swing leaves.

Double Swing Gate Installation

For a standard double-leaf entrance, two roller motors are used, with one motor installed on each gate leaf.

The controller manages the opening and closing sequence of both motors and can provide a delay between the leaves if required.

Villa Roller Swing Gate Motor UAE

The roller swing gate opener is suitable for UAE villas with heavy swing gates that use supporting ground wheels.

Remote control, automatic closing, photocell safety and 24V operation provide convenient everyday vehicle access.

Commercial Gate Applications

The system can also be used for suitable commercial gates where the gate structure, duty cycle, wheel condition and ground surface comply with the requirements of the motor system.

Industrial Gate Applications

Wheel-driven swing gate motors can be useful for warehouses, factories and industrial compounds using large wheel-supported swing gates.

For intensive industrial operation, expected daily cycles should be confirmed before installation instead of selecting the system only by the 700 KG weight rating.

Roller Swing Gate Opener Applications

• Villa entrance gates
• Residential swing gates
• Wheel-supported swing gates
• Commercial entrances
• Warehouse gates
• Factory gates
• Industrial compound entrances
• Private parking entrances
• Single swing gates
• Double swing gates
• Heavy steel gates with supporting wheels
• Gates requiring wide opening angles

Professional Installation UAE

Professional installation of the 700 KG roller swing gate opener is available throughout the UAE.

Installation can include gate inspection, wheel positioning, motor mounting, control-board installation, wiring, remote programming, photocell installation, flashing-light connection, automatic-closing setup, obstacle-detection adjustment and complete operational testing.

Installation Checks Before Fitting

• Confirm actual gate weight
• Measure gate leaf width
• Inspect gate hinges
• Check supporting gate wheels
• Ensure the gate moves freely manually
• Check ground level and surface condition
• Check wheel traction through the complete travel
• Confirm required opening angle
• Assess wind load
• Check power supply
• Install safety photocells
• Adjust obstacle-detection force correctly
• Test manual release
• Test automatic closing safely

Roller Swing Gate Motor Repair UAE

Repair and maintenance support is available for roller swing gate motors in the UAE.

Service work can include motor inspection, wheel replacement, control-board troubleshooting, remote programming, photocell replacement, flashing-light repair, battery replacement, wiring repairs and gate mechanical adjustment.

Roller Wheel Maintenance

The drive wheel is one of the most important mechanical components of the system.

Regular inspection should check:

• Wheel wear
• Rubber condition
• Wheel alignment
• Ground contact pressure
• Traction
• Motor mounting bolts
• Gate hinge condition

Why Choose a Roller Swing Gate Opener?

• Suitable for heavy wheel-supported swing gates
• Up to approximately 700 KG gate capacity
• Up to approximately 3 m gate leaf width
• 24V DC motor technology
• Up to approximately 180° opening
• Soft start and soft stop
• Obstacle detection
• Automatic reverse
• Automatic closing
• Single and double gate configurations
• Photocell compatibility
• Flashing-light compatibility
• Manual emergency release
• Optional backup battery
• Professional UAE installation available

Buy Roller Swing Gate Opener 700 KG UAE

Buy the Automatic Roller Swing Gate Opener Motor 700 KG in UAE for reliable automation of wheel-supported villa, residential, commercial and suitable industrial swing gates.

Supply, professional installation, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is a roller swing gate opener?
A roller swing gate opener is a motorized wheel system installed near the bottom of a swing gate. The powered wheel moves the gate across the ground during opening and closing.

Is this a NICE motor?
No official NICE model is identified for this roller-wheel product. It should be sold as a generic or separate roller swing gate opener unless the physical motor carries a verified manufacturer model.

What is the maximum gate weight?
The system is designed for compatible gates weighing up to approximately 700 KG.

What is the maximum gate width?
The recommended gate leaf width is up to approximately 3 metres.

Does 700 KG apply to every gate?
No. Gate width, wheel condition, hinges, ground surface and mechanical resistance must also be checked.

What voltage is the roller gate motor?
The motor operates from approximately 24V DC, with the control system supplied from approximately 220V AC.

How far can the gate open?
Under suitable installation conditions, the roller gate system can provide an opening angle of up to approximately 180°.

Does it have soft start and soft stop?
Yes. The electronic control system supports soft acceleration and deceleration.

Does it have obstacle detection?
Yes, when correctly configured. The controller can detect abnormal resistance and stop or reverse the gate.

Does it support automatic closing?
Yes. Automatic closing can be programmed through the control board.

Can I use one motor for a single gate?
Yes, where supported by the controller configuration.

Can it automate a double swing gate?
Yes. A complete double gate system normally uses two roller motors, one for each leaf.

Does it support photocells?
Yes. Infrared safety photocells can be connected to the control system.

Can I add a flashing light?
Yes. A compatible flashing warning light can be connected.

Does it have manual release?
Yes. Manual emergency operation is available when required.

Can I install a backup battery?
An optional battery backup can be used with a compatible 24V control system.

Does the ground need to be level?
Yes. A stable and reasonably level surface is important because the drive wheel relies on continuous ground contact and traction.

Is this suitable for UAE villas?
Yes, particularly for villa gates that already use supporting ground rollers or wheels.

Do you provide installation in UAE?
Yes. Professional installation, maintenance and repair support is available throughout the UAE.