NICE TOONA 5 TO5016 Swing Gate Motor – Up to 5 M

NICE TO5016 Heavy-Duty Automatic Swing Gate Motor UAE

The NICE TOONA 5 TO5016 is a professional 230V AC electromechanical linear swing gate motor designed for large residential and commercial swing gates with leaves up to approximately 5 metres. Part of the NICE Toona 5 range, the TO5016 combines strong linear force, durable aluminium construction, reliable mechanical transmission and electrical limit switches for both opening and closing.

NICE specifies the TO5016 with a 230V AC power supply, 340 W maximum absorbed power, 1.5 A maximum current, 1800 N maximum force and 0.013 m/s maximum actuator speed. The motor is designed for demanding swing gate installations where accurate opening and closing travel control is required.

The TO5016 is especially suitable for large villa gates, residential compounds, commercial properties and compatible industrial entrances throughout the UAE. Gate length, gate weight, wind exposure, hinge condition and installation geometry must always be checked before selecting the motor.

NICE TOONA 5 TO5016 Key Features

• Professional NICE TOONA 5 swing gate motor
• Official model: TO5016
• Suitable for gate leaves up to approximately 5 metres
• Maximum permitted gate weight depends on leaf length
• 230V AC electromechanical linear operator
• Maximum absorbed power: 340 W
• Maximum current absorption: 1.5 A
• Nominal absorbed power: 180 W
• Nominal current absorption: 1 A
• Maximum force: 1800 N
• Nominal force: 600 N
• Maximum actuator speed: 0.013 m/s
• Nominal actuator speed: 0.010 m/s
• Actuator stroke: approximately 505 mm
• Electrical limit switch for opening
• Electrical limit switch for closing
• Up to approximately 54 cycles/hour
• Built-in 7 µF capacitor
• Surface-mounted installation
• Durable aluminium housing
• Quiet bronze worm-drive transmission
• Top-access connection compartment
• Manual emergency release
• Recommended control unit: NICE MC800
• IP44 protection
• Operating temperature: -20°C to +50°C

NICE TO5016 Technical Specifications

Brand	NICE
Series	TOONA 5
Model	TO5016
Product Type	Surface-Mounted Electromechanical Swing Gate Motor
Maximum Gate Leaf Length	Up to 5 Metres
Gate Leaf Weight	Depends on Leaf Length & Installation Conditions
Power Supply	230V AC, 50 Hz
Maximum Current	1.5 A
Nominal Current	1 A
Maximum Absorbed Power	340 W
Nominal Absorbed Power	180 W
Built-In Capacitor	7 µF
Maximum Force	1800 N
Nominal Force	600 N
Maximum Speed	0.013 m/s
Nominal Speed	0.010 m/s
Stroke	505 mm
Limit Switch	Electrical – Opening & Closing
Work Cycle	Up to 54 Cycles/Hour
Thermal Protection	140°C
Insulation Class	F
Protection Rating	IP44
Operating Temperature	-20°C to +50°C
Dimensions	965 × 115 × 105 mm
Weight	7 KG
Recommended Control Unit	NICE MC800

Up to 5 Metres per Gate Leaf

The NICE TO5016 is designed for compatible swing gate leaves measuring up to approximately 5 metres.

For a double swing gate system, one TO5016 motor can be installed on each compatible leaf, subject to NICE operating limits and correct installation geometry.

Gate Weight Depends on Leaf Length

The TO5016 should not be described simply as a fixed maximum KG motor at the full 5 metre gate length.

NICE uses operating-limit charts that consider both gate leaf length and gate leaf weight. As the gate becomes longer, the maximum allowable weight generally decreases because of increased leverage on the hinges and motor.

Always check actual gate dimensions, weight, construction, hinges and wind exposure before selecting the motor.

1800 N Maximum Force

The NICE TO5016 produces up to approximately 1800 N maximum linear force, with approximately 600 N nominal force.

The maximum figure represents peak capability and should not be confused with the nominal continuous operating force.

Correct front and rear bracket positioning is essential for transferring this force efficiently to the gate.

230V AC Motor Technology

The TO5016 is powered by 230V AC at 50 Hz. NICE specifies maximum current absorption of approximately 1.5 A and maximum absorbed power of approximately 340 W.

During nominal operation, the values are approximately 1 A and 180 W.

Electrical Limit Switches for Opening & Closing

One of the most important characteristics of the TO5016 is its electrical limit-switch system for both opening and closing.

This enables accurate adjustment of the motor travel at both ends of the gate movement and is the major technical difference between TO5016 and TO5015.

TO5016 vs TO5015 Limit Switch

Feature	TO5015	TO5016
Voltage	230V AC	230V AC
Maximum Force	1800 N	1800 N
Maximum Speed	0.013 m/s	0.013 m/s
Opening Limit Switch	Yes	Yes
Closing Limit Switch	No	Yes
Stroke	540 mm	505 mm

Choose TO5016 where electrical control of both the open and closed travel positions is preferred.

505 mm Actuator Stroke

NICE specifies approximately 505 mm actuator travel for TO5016.

This is another important difference from TO5015, which has approximately 540 mm travel. Do not copy TO5015's 540 mm stroke onto the TO5016 page.

0.013 m/s Maximum Speed

The TO5016 reaches approximately 0.013 m/s maximum linear speed, with around 0.010 m/s at nominal operating load.

The actual time required for the gate to open depends on mounting geometry, opening angle and the amount of actuator travel used.

Up to 54 Cycles per Hour

NICE's Toona technical manual specifies approximately 54 cycles/hour for TO5016 at nominal operating conditions.

Actual permissible duty can be reduced by gate weight, gate length, environmental temperature, wind loading and mechanical resistance.

Long Working Life

NICE estimates Toona series durability at approximately 80,000 to 250,000 operating cycles, depending on the severity of the installation.

Regular gate maintenance, correct geometry and keeping the hinges and mechanical structure in good condition help reduce motor stress.

Built-In 7 µF Capacitor

The TO5016 includes a 7 µF capacitor inside the motor assembly, simplifying installation of the 230V actuator.

When replacing the capacitor during maintenance, the replacement should match the required electrical specification.

Durable Aluminium Housing

The NICE TOONA series uses two robust aluminium housing shells finished with a protective polyester coating.

The internal moving components are manufactured from steel, light alloys and engineering technopolymers to provide reliable operation and long service life.

Quiet Bronze Worm Transmission

NICE uses a bronze worm-drive transmission and a patented internal component arrangement to help provide smooth and quiet operation.

This makes TO5016 suitable for large residential and commercial entrances where strong gate automation is required without unnecessarily noisy mechanical operation.

Top-Access Wiring Compartment

The TO5016 includes a spacious connection compartment accessible from the upper section of the motor.

This gives technicians convenient access during installation, wiring, diagnostics and future maintenance.

Manual Emergency Release

The motor includes a manual release mechanism so that the actuator can be disengaged if manual gate operation is required.

The gate should always move smoothly by hand before automation is installed. Excessive friction, damaged hinges or poor alignment should be corrected before fitting the motor.

NICE MC800 Control Unit

The recommended modern control unit for the 230V NICE TO5016 is the NICE MC800.

MC800 can control two compatible 230V swing gate motors and provides connections for safety devices, commands, radio systems and configurable gate operating functions.

Important: Do Not Use MC824H as the Standard TO5016 Controller

The TO5016 is a 230V AC motor. The NICE MC824H platform is intended for compatible 24V DC Toona motors such as TO5024 and TO5024I.

Do not advertise TO5016 as an MC824H motor and do not copy 24V-specific features such as direct PS324 battery backup, magnetic encoder operation or 24V obstacle-detection functions onto this product.

Automatic Closing

When used with a correctly configured NICE MC800 control unit, the gate automation can be programmed for automatic closing after a selected pause period.

Appropriate safety photocells should be installed and tested before automatic closing is enabled.

Pedestrian Opening

The compatible NICE control system can provide a pedestrian access function so that the gate can perform a reduced opening when full vehicle access is not required.

Safety Photocells

A complete TO5016 installation can be integrated with compatible NICE safety photocells according to the control-panel configuration.

Photocells should be correctly positioned, wired and tested to improve protection around the gate movement area.

NICE Remote Control Compatibility

Compatible NICE remote controls can be used by installing the appropriate NICE radio receiver in the control panel.

The exact transmitter family should match the radio receiver physically installed in the system.

Recommended TO5016 Double Gate Package

• 2 × NICE TOONA 5 TO5016 Swing Gate Motors
• 1 × NICE MC800 230V Control Unit
• 1 × Compatible NICE Radio Receiver
• 2 × Compatible NICE Remote Controls
• 1 Pair × NICE Safety Photocells
• 1 × NICE Flashing Warning Light
• Front & Rear Motor Mounting Brackets
• 1 × Push Button if included in seller package

Note: TO5016 is an individual motor model. Package contents can vary according to the seller and project. Always list the exact remotes, receiver, photocells, flashing light, brackets and push button physically supplied with the UAE package.

NICE TO5016 Applications

• Large villa swing gates
• Residential compounds
• Private driveway gates
• Commercial building entrances
• Commercial parking gates
• Warehouse entrances within operating limits
• Large steel swing gates
• Aluminium swing gates
• Single-leaf swing gates
• Double-leaf swing gates
• Gate leaves up to approximately 5 metres

NICE TO5016 for Villas UAE

The NICE TOONA 5 TO5016 is an excellent solution for larger UAE villa gates where standard shorter residential actuators are not suitable.

Its strong 230V motor, long actuator body and opening-and-closing electrical limit switches provide precise and dependable gate movement when professionally installed.

Commercial Swing Gate Automation

TO5016 can also be used for suitable commercial gates where gate dimensions, operating frequency and environmental conditions remain within NICE limits.

For genuinely intensive industrial applications, motor selection should be based on duty cycle as well as gate size. A suitable 24V intensive-use Toona variant may be preferable where very frequent operation is required.

Wind Load Consideration

Long swing gate leaves create substantial leverage and can also experience significant wind pressure.

This is particularly important for solid gates in UAE outdoor conditions. Gate weight alone is not sufficient for choosing a motor; gate surface area, wind exposure, hinge condition and installation geometry must also be evaluated.

Professional NICE TO5016 Installation UAE

Professional installation of the NICE TOONA 5 TO5016 swing gate motor is available throughout the UAE.

Installation can include gate inspection, motor bracket installation, electrical wiring, MC800 control-panel setup, opening and closing limit-switch adjustment, photocell installation, flashing-light connection, receiver setup, remote programming and complete operational testing.

Installation Checks Before Fitting TO5016

• Measure actual gate leaf length
• Confirm actual gate leaf weight
• Check official NICE operating limits
• Inspect gate hinges and pivots
• Ensure the gate moves smoothly manually
• Check structural strength of gate posts
• Calculate correct motor mounting geometry
• Confirm required opening angle
• Assess wind exposure
• Adjust opening electrical limit switch
• Adjust closing electrical limit switch
• Install and test safety photocells
• Test manual release operation

NICE TO5016 Repair & Spare Parts UAE

Technical support is available for NICE TO5016 repair, maintenance and spare parts throughout the UAE.

Service components can include motor parts, 7 µF capacitor, opening and closing limit-switch components, transmission parts, manual-release components, mounting brackets, MC800 control units, radio receivers, remote controls, photocells and flashing lights.

NICE TO5016 vs TO5024

Specification	TO5016	TO5024
Power Supply	230V AC	24V DC
Maximum Leaf Length	Up to 5 m	Up to 5 m
Maximum Force	1800 N	1800 N
Maximum Speed	0.013 m/s	0.016 m/s
Position Feedback	Electrical Limit Switches	Magnetic Encoder
Recommended Control Platform	MC800	MC824H
Battery Backup	Not Direct 24V Backup	Compatible System Available

Choose TO5016 for a robust conventional 230V system with opening and closing electrical limit switches. Choose TO5024 when 24V operation, encoder feedback and advanced 24V control functions are required.

NICE TO5016 vs TO5024I

The TO5024I is the intensive-use 24V version of the Toona 5 platform and includes magnetic encoder technology.

TO5016 is better suited to customers wanting conventional 230V automation, while TO5024I should be considered for applications requiring intensive duty and advanced 24V electronic movement management.

Why Choose NICE TOONA 5 TO5016?

• Professional NICE TOONA 5 linear operator
• Gate leaves up to approximately 5 metres
• 230V AC motor
• 340 W maximum absorbed power
• 1800 N maximum force
• 600 N nominal force
• 0.013 m/s maximum speed
• Opening electrical limit switch
• Closing electrical limit switch
• 505 mm actuator stroke
• Up to 54 cycles/hour
• Strong aluminium construction
• Quiet bronze worm transmission
• Built-in capacitor
• Top-access wiring compartment
• Compatible with NICE MC800
• Suitable for large residential and commercial gates
• Professional installation available throughout UAE

Buy NICE TOONA 5 TO5016 Gate Motor UAE

Buy the NICE TOONA 5 TO5016 230V swing gate motor in UAE for reliable automation of large residential and commercial swing gates. Contact us for availability, UAE delivery, professional installation, programming, repair, maintenance and NICE spare parts.

Supply and installation support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE TO5016?
The TO5016 is a 230V AC electromechanical linear swing gate motor from the NICE TOONA 5 range.

What is the maximum gate leaf length?
NICE specifies compatible swing gate leaves up to approximately 5 metres.

Can TO5016 handle maximum gate weight at 5 metres?
Do not assume this. Gate weight and gate length must be evaluated together according to NICE operating limits.

What voltage is TO5016?
TO5016 operates from 230V AC, 50 Hz.

What is the maximum power?
Maximum absorbed power is approximately 340 W, while nominal absorbed power is approximately 180 W.

What is the maximum force?
TO5016 provides approximately 1800 N maximum force and 600 N nominal force.

How fast is NICE TO5016?
Maximum actuator speed is approximately 0.013 m/s.

What is the TO5016 stroke?
The actuator stroke is approximately 505 mm.

How many cycles per hour can TO5016 perform?
NICE technical documentation specifies approximately 54 cycles/hour under rated conditions.

Does TO5016 have an opening limit switch?
Yes. TO5016 has an electrical opening limit switch.

Does TO5016 have a closing limit switch?
Yes. This is an important advantage of TO5016: it has electrical limit switches for both opening and closing.

What is the difference between TO5015 and TO5016?
Both are 230V Toona 5 motors with similar power, force and speed. TO5015 has an electrical limit switch for opening, while TO5016 has electrical limit switches for both opening and closing. TO5016 also uses approximately 505 mm travel compared with about 540 mm for TO5015.

What control board should be used with TO5016?
The recommended modern controller is the NICE MC800.

Can I use MC824H with TO5016?
MC824H is intended for compatible 24V NICE motors. TO5016 is a 230V AC motor, so MC800 is the appropriate standard control-panel choice.

Does TO5016 directly support PS324 battery backup?
No. Do not advertise the direct PS324 battery-backup feature associated with compatible 24V NICE systems as a standard TO5016 feature.

Is TO5016 suitable for UAE villas?
Yes. It is especially suitable for larger villa and residential swing gates when the gate dimensions and operating conditions comply with NICE limits.

Do you provide NICE TO5016 installation in UAE?
Yes. Professional installation, programming, maintenance and repair support is available throughout the UAE.