NICE TOONA 6 HS TO6024HS High-Speed Swing Gate Motor – Up to 6 M

NICE TO6024HS High-Speed Heavy-Duty Swing Gate Motor UAE

The NICE TOONA 6 HS TO6024HS is a professional 24V DC high-speed swing gate motor designed for large residential, commercial and industrial swing gates. Part of the NICE Hi-Speed range, the TO6024HS combines powerful 2200 N maximum force, magnetic encoder technology, advanced electronic movement control and a long 584 mm actuator stroke for demanding gate automation applications.

NICE specifies the TO6024HS for compatible swing gate leaves up to approximately 6 metres or 1450 KG, subject to the manufacturer's gate weight-versus-leaf-length operating limits. It provides approximately 0.016 m/s linear speed and can achieve a standard 90° opening in approximately 30 seconds, excluding acceleration and deceleration phases.

The motor operates from 24V DC and is designed for use with compatible NICE control systems such as the MC824H. The combination provides BlueBUS connectivity, obstacle detection, self-learning travel positions, programmable slowdown, pedestrian opening and optional PS324 battery backup.

NICE TOONA 6 HS TO6024HS Key Features

• Professional NICE Hi-Speed swing gate motor
• Official model: TO6024HS
• NICE TOONA 6 Hi-Speed series
• Suitable for swing gate leaves up to approximately 6 metres
• Maximum gate weight up to approximately 1450 KG on shorter leaves
• Gate weight reduces as gate leaf length increases
• 24V DC electromechanical gearmotor
• Maximum current absorption: 5 A
• Nominal current absorption: 2.5 A
• Maximum absorbed power: 120 W
• Nominal absorbed power: 60 W
• Maximum force: 2200 N
• Nominal force: 1200 N
• No-load speed: 0.016 m/s
• Approximately 30-second 90° opening in standard installation conditions
• Up to 41 cycles/hour at nominal force
• Magnetic encoder
• Precise obstacle detection
• Mechanical stops for opening and closing
• Long 584 mm actuator travel
• Surface-mounted installation
• Heavy-duty aluminium housing
• Bronze lead-nut transmission
• Large top-access wiring compartment
• NICE MC824H control-unit compatibility
• NICE BlueBUS technology through compatible controller
• Opening and closing slowdown
• Automatic fault diagnostics
• Pedestrian opening function
• Optional PS324 battery backup
• IP44 protection
• Operating temperature: -20°C to +50°C

NICE TO6024HS Technical Specifications

Brand	NICE
Series	TOONA 6 Hi-Speed
Model	TO6024HS
Product Type	High-Speed Electromechanical Swing Gate Motor
Maximum Gate Leaf Length	Up to 6 Metres
Maximum Gate Leaf Weight	Up to Approx. 1450 KG on Shorter Leaves – Depends on Leaf Length
Motor Power Supply	24V DC
Maximum Current Absorption	5 A
Nominal Current Absorption	2.5 A
Maximum Absorbed Power	120 W
Nominal Absorbed Power	60 W
Maximum Force	2200 N
Nominal Force	1200 N
No-Load Speed	0.016 m/s
Approx. 90° Opening Time	Approx. 30 Seconds*
Work Cycle	41 Cycles/Hour at Nominal Force
Actuator Travel	584 mm
Position Feedback	Magnetic Encoder
Mechanical Stops	Opening & Closing
Protection Rating	IP44
Operating Temperature	-20°C to +50°C
Insulation Class	F
Dimensions	1200 × 128 × 150 mm
Weight	15 KG
Recommended Control Unit	NICE MC824H

*Approximate opening time based on NICE standard installation conditions, excluding acceleration and deceleration phases. Actual opening time depends on gate geometry, opening angle and programming.

Up to 6 Metres per Gate Leaf

The NICE TO6024HS is designed for very large swing gate leaves reaching approximately 6 metres.

This is an important correction compared with listings that describe TO6024HS as only a 5 metre gate motor. NICE officially specifies the TO6024HS Hi-Speed model for gates with leaves up to approximately 6 metres.

Up to 1450 KG Gate Capacity

NICE also lists TO6024HS for swing gate leaves weighing up to approximately 1450 KG.

However, this figure must not be interpreted as 1450 KG at the full 6 metre leaf length. NICE uses a gate weight-versus-leaf-length operating graph, and the permitted gate weight decreases substantially as the leaf becomes longer.

Gate Weight & Length Operating Limits

The TO6024HS operating graph shows that very heavy gates are possible only with shorter leaves. As the gate leaf approaches 6 metres, the allowable weight becomes much lower.

Motor selection should therefore consider:

• Actual gate leaf length
• Actual gate leaf weight
• Gate surface area
• Wind exposure
• Gate hinge condition
• Required opening angle
• Mounting geometry
• Daily operating frequency

30-Second High-Speed Opening

The TO6024HS is part of the NICE Hi-Speed family. NICE specifies an approximate 90° gate opening time of 30 seconds for a standard installation.

This timing excludes acceleration and deceleration phases and should therefore be treated as an approximate reference rather than a guaranteed opening time for every gate.

0.016 m/s Linear Speed

The actuator reaches approximately 0.016 metres per second at no load.

The actual angular speed of the gate leaf depends on the front and rear bracket dimensions, gate geometry and the amount of actuator stroke used.

2200 N Maximum Force

The NICE TO6024HS provides up to approximately 2200 N maximum linear force, with approximately 1200 N nominal force.

This strong output allows the operator to automate substantial swing gates while still providing electronically controlled 24V operation.

Correct installation geometry is essential to obtain the required leverage and avoid excessive mechanical stress.

24V DC High-Speed Technology

The TO6024HS uses a 24V DC electromechanical motor. This allows the compatible NICE electronic control system to manage movement more precisely than a conventional basic AC motor installation.

The 24V platform supports encoder feedback, obstacle detection, automatic travel learning, programmable acceleration and slowdown, and optional battery backup.

120 W Maximum Motor Power

NICE specifies approximately 120 W maximum absorbed power and approximately 60 W nominal absorbed power.

Maximum current is approximately 5 A, while nominal current is approximately 2.5 A.

41 Cycles per Hour

NICE specifies approximately 41 cycles/hour at nominal force for TO6024HS.

This makes the motor suitable for demanding residential, commercial and selected industrial applications where frequent operation and large gate dimensions are required.

The actual permissible duty can be reduced by heavy gate leaves, long gate leaves, high ambient temperature, wind loading and mechanical resistance.

Product Durability

NICE estimates Toona series durability between approximately 80,000 and 250,000 manoeuvre cycles, depending on the demand index and installation conditions.

Heavy leaves, long gates, temperatures above 40°C or below 0°C, high humidity, blind gate panels and windy installations all increase the demand placed on the automation.

584 mm Actuator Travel

The TO6024HS provides a long 584 mm actuator stroke.

This long travel contributes to its suitability for larger swing gate leaves and installations requiring substantial motor movement.

Magnetic Encoder

The TO6024HS includes a magnetic encoder that provides accurate movement feedback to the compatible electronic control unit.

NICE highlights the encoder as an important feature for maintaining programmed values over time and supporting precise obstacle detection.

Dual-Technology Obstacle Detection

When TO6024HS is connected to the compatible NICE MC824H system and correctly configured, the automation uses encoder feedback together with electronic control to detect abnormal resistance during gate movement.

This supports obstacle detection and safer movement management, but photocells, sensitive edges and other required safety devices should still be installed and tested according to the application.

Mechanical Stops for Opening & Closing

The TO6024HS is supplied with mechanical stops for both the opening and closing positions.

This allows the installer to establish the required gate travel mechanically while the electronic system learns and manages the gate positions.

NICE MC824H Control Unit

The correct control platform for the NICE TO6024HS is the NICE MC824H 24V swing gate control unit.

NICE specifically includes TO6024HS among the motors programmed with MC824H. The system supports BlueBUS device learning, gate-position learning and compatible NICE transmitter memorisation.

Automatic Travel Learning

The MC824H can automatically learn the opening and closing positions of the gate during commissioning.

Travel learning should only be carried out after the motors, gate mechanics, mechanical stops and safety devices are correctly installed.

BlueBUS Technology

When used with the NICE MC824H, the TO6024HS installation supports NICE BlueBUS technology.

BlueBUS allows compatible safety devices such as photocells to share a two-wire connection for power and communication, helping simplify professional installation.

Opening & Closing Slowdown

The compatible MC824H control unit provides programmable deceleration during both opening and closing.

This is especially beneficial on large and heavy swing gates because the motor can reduce speed before reaching the final travel position, helping decrease mechanical impact on the gate, hinges and mounting brackets.

Automatic Fault Diagnostics

The NICE control system provides diagnostic functions to assist technicians in identifying automation faults and abnormal operating conditions.

This can simplify maintenance and troubleshooting of the motor, control system and connected safety accessories.

Pedestrian Opening

The complete TO6024HS system can be configured with a pedestrian opening function so that partial access can be provided without performing a complete vehicle-opening cycle.

Programmable Automatic Closing

The MC824H can be programmed to close the gate automatically after a selected pause time.

Appropriate photocells and other safety systems must be properly installed and tested whenever automatic closing is enabled.

Optional PS324 Battery Backup

Because TO6024HS is a compatible NICE 24V motor, the MC824H system supports the optional PS324 rechargeable backup battery.

This can allow limited gate operation during a mains power failure, depending on battery condition and system configuration.

Safety Edge Compatibility

The MC824H platform provides support for compatible resistive safety edges, including 8.2 kΩ safety-edge systems.

This is particularly useful on large gates where additional protection may be required around closing or crushing areas.

NICE Opera Compatibility

The TO6024HS control system can be integrated with compatible NICE Opera programming and management technologies through the appropriate control unit and accessories.

Opera compatibility should be described as a feature of the complete automation system rather than as something built directly into the motor itself.

Solemyo Solar Compatibility

NICE Hi-Speed documentation has listed TO6024HS systems as compatible with the NICE Solemyo solar-power system when configured with the required NICE components.

Solar-system sizing should be calculated according to gate weight, daily operating cycles, local sunlight conditions and connected accessories.

Heavy-Duty Aluminium Housing

The TO6024HS motor body consists of two robust aluminium shells with a protective polyester paint finish.

NICE designed this housing to improve mechanical strength and resistance to normal outdoor atmospheric conditions.

Steel, Alloy & Technopolymer Internal Components

The internal moving parts use steel, light alloys and engineering technopolymers selected for strength, smooth movement and long service life.

The construction is appropriate for demanding swing gate applications where larger leaves place substantial mechanical loads on the actuator.

Quiet Bronze Transmission

The Toona HS design uses a patented internal component layout and bronze lead-nut transmission to provide relatively smooth and quiet operation.

This is particularly useful for large residential entrances where strong gate automation is required without excessive operating noise.

Large Top-Access Connection Compartment

The TO6024HS includes a generously sized electrical connection compartment accessible from the upper section of the motor.

This gives installers convenient access during wiring, installation, diagnostics and maintenance.

Recommended TO6024HS Double Gate Package

• 2 × NICE TO6024HS High-Speed Swing Gate Motors
• 1 × NICE MC824H 24V Control Unit
• 1 × Compatible NICE Radio Receiver
• 2 × Compatible NICE Remote Controls
• 1 Pair × NICE BlueBUS Photocells
• 1 × NICE Flashing Warning Light
• 2 × Motor Fixing Bracket Sets
• 1 × Push Button if included in seller package

Important: The accessories above should reflect the actual UAE seller package. NICE TO6024HS is also available as an individual motor, so remotes, receiver, photocells, flashing light and push button must not be described as factory-included unless supplied with the specific package.

Compatible NICE Accessories

• NICE MC824H control unit
• NICE MC824HR control unit where applicable
• NICE OXIBD / compatible radio receiver
• NICE remote controls
• NICE EPMB BlueBUS photocells
• NICE EPLB BlueBUS photocells
• NICE F210B BlueBUS photocells
• NICE flashing warning light
• NICE PS324 backup battery
• Compatible 8.2 kΩ safety edges
• Electric lock where required
• Key selector switch
• Push button
• GSM gate opener
• RFID access control
• Intercom system

Electric Lock for Long Gate Leaves

For very long swing gate leaves, an appropriate electric lock should be considered according to the gate design and NICE installation requirements.

NICE documentation for long swing-gate installations lists electric locks for leaves exceeding approximately 3 metres. The installer should select the correct vertical or horizontal locking system according to the gate construction.

NICE TO6024HS Applications

• Large villa swing gates
• Luxury residential entrances
• Residential compounds
• Commercial entrances
• Industrial properties
• Factories within operating limits
• Warehouse entrances
• Gated communities
• Hotels and institutional entrances
• Large steel swing gates
• Aluminium swing gates
• High-speed access applications
• Gate leaves up to approximately 6 metres

NICE TO6024HS for Villas UAE

The NICE TOONA 6 HS TO6024HS can be an excellent solution for large UAE villa entrances where conventional residential swing gate motors do not provide sufficient leaf capacity.

The 24V system, magnetic encoder and controlled slowdown provide smooth movement while its 2200 N maximum force gives the motor strong performance for large gate leaves.

Commercial & Industrial Gate Automation

NICE officially positions TO6024HS for both residential and industrial applications.

Its combination of large leaf capacity, 24V electronics, encoder feedback and Hi-Speed operation makes it suitable for commercial and industrial entrances when the gate dimensions and duty requirements remain within the manufacturer's operating limits.

Wind Load Consideration

NICE specifically warns that gate shape, height and strong wind can significantly reduce the operating limits shown in the weight-versus-length graph.

This is especially important in UAE installations with large solid-panel gates. Wind pressure can create considerably more load on a 5 m or 6 m swing gate than the gate's physical weight alone suggests.

Professional NICE TO6024HS Installation UAE

Professional installation of the NICE TOONA 6 HS TO6024HS high-speed swing gate motor is available throughout the UAE.

Installation can include gate inspection, motor bracket positioning, MC824H control-panel installation, electrical wiring, BlueBUS photocells, safety edges, flashing light, receiver setup, remote programming, travel learning, obstacle-detection adjustment, slowdown programming and complete operational testing.

Installation Checks Before Fitting TO6024HS

• Measure actual gate leaf length
• Confirm actual gate leaf weight
• Check NICE weight-versus-length operating graph
• Inspect gate hinges and pivots
• Confirm each gate leaf moves freely manually
• Assess structural strength of gate posts
• Calculate correct motor bracket dimensions
• Confirm required opening angle
• Assess wind load and gate surface area
• Set mechanical opening and closing stops
• Install appropriate safety photocells
• Configure encoder obstacle detection correctly
• Program slowdown and travel learning
• Test manual release and emergency operation

NICE TO6024HS Repair & Spare Parts UAE

Technical support is available for NICE TO6024HS repair, programming, maintenance and spare parts throughout the UAE.

Service parts and compatible components can include actuator mechanical components, magnetic encoder parts, manual release components, fixing brackets, MC824H control units, radio receivers, remote controls, BlueBUS photocells, flashing lights, safety edges and PS324 backup batteries.

NICE TO6024HS vs TO5024HS

Specification	TO5024HS	TO6024HS
Series	TOONA 5 HS	TOONA 6 HS
Motor Voltage	24V DC	24V DC
Maximum Leaf Length	Up to 5 m	Up to 6 m
Maximum Headline Weight	Up to 400 KG	Up to 1450 KG
Maximum Force	1800 N	2200 N
Speed	0.025 m/s	0.016 m/s
Approx. 90° Opening	16 Seconds	30 Seconds
Cycles / Hour	95	41
Actuator Travel	Approx. 505–540 mm	584 mm
Maximum Force	1800 N	2200 N

Choose TO5024HS when very fast movement is the priority on compatible gates up to approximately 5 m. Choose TO6024HS for larger and substantially heavier gates up to approximately 6 m where greater force and gate capacity are required.

NICE TO6024HS vs TO7024

Both TO6024HS and TO7024 use a long 584 mm actuator stroke and 24V DC architecture, but they serve different purposes.

TO6024HS is the Hi-Speed model with approximately 0.016 m/s no-load speed and 2200 N maximum force. TO7024 is designed for even longer gate leaves up to approximately 7 m and provides greater maximum force, but operates more slowly.

Why Choose NICE TOONA 6 HS TO6024HS?

• Genuine NICE Hi-Speed gate automation
• Gate leaves up to approximately 6 metres
• Maximum headline capacity up to 1450 KG on shorter leaves
• 24V DC motor technology
• 2200 N maximum force
• 1200 N nominal force
• 0.016 m/s high-speed actuator movement
• Approx. 30-second 90° opening
• 41 cycles/hour at nominal force
• 584 mm long actuator stroke
• Magnetic encoder
• Obstacle detection when correctly configured
• Opening and closing mechanical stops
• NICE MC824H compatibility
• BlueBUS safety-device support
• Optional PS324 battery backup
• Suitable for residential and industrial applications
• Professional UAE installation available

Buy NICE TO6024HS High-Speed Gate Motor UAE

Buy the NICE TOONA 6 HS TO6024HS high-speed swing gate motor in UAE for professional automation of large residential, commercial and industrial swing gates. Contact us for product availability, UAE delivery, professional installation, programming, maintenance, repair and NICE spare parts.

Supply and installation support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE TO6024HS?
The TO6024HS is a 24V DC high-speed electromechanical swing gate operator from the NICE TOONA 6 Hi-Speed range.

What is the maximum gate leaf length?
NICE officially specifies gate leaves up to approximately 6 metres.

What is the maximum gate weight?
NICE states up to approximately 1450 KG, but this applies only within the official gate weight-versus-leaf-length operating limits.

Can TO6024HS handle 1450 KG at 6 metres?
No. The 1450 KG and 6 m figures are alternative headline operating limits. The allowable weight decreases as the gate leaf becomes longer.

What voltage is NICE TO6024HS?
TO6024HS operates from 24V DC.

What is the motor power?
Maximum absorbed power is approximately 120 W, with approximately 60 W nominal absorbed power.

What is the maximum force?
TO6024HS provides approximately 2200 N maximum force and approximately 1200 N nominal force.

How fast is TO6024HS?
NICE specifies approximately 0.016 m/s no-load actuator speed.

How long does the gate take to open?
A standard 90° opening is approximately 30 seconds under NICE test conditions, excluding acceleration and deceleration.

How many cycles per hour can TO6024HS perform?
NICE specifies approximately 41 cycles/hour at nominal force.

Does TO6024HS have an encoder?
Yes. It uses a magnetic encoder for accurate movement feedback and obstacle detection.

What control board does TO6024HS use?
The NICE MC824H is the correct compatible 24V control platform for TO6024HS.

Does TO6024HS support BlueBUS?
Yes, when connected through a compatible NICE control unit such as MC824H, the automation supports BlueBUS safety devices.

Does TO6024HS support battery backup?
Yes. The MC824H system supports the optional NICE PS324 rechargeable backup battery.

Is TO6024HS suitable for industrial gates?
Yes. NICE officially positions TO6024HS for both residential and industrial applications, subject to the gate dimensions and operating limits.

Do you provide NICE TO6024HS installation in UAE?
Yes. Professional installation, programming, maintenance and repair support is available throughout the UAE.