NICE MYGO4 Gate Remote Control – 4 Channel 433.92 MHz

NICE MYGO4 433.92 MHz O-Code Gate Remote UAE

The NICE MYGO4 is a modern 4-channel 433.92 MHz unidirectional remote control transmitter designed for compatible NICE automatic gates, garage door openers, parking barriers and other automation systems.

The MYGO4 belongs to the current NICE MyGO transmitter family and is factory-programmed with NICE O-Code unidirectional radio encoding. It provides four programmable buttons, allowing several automation commands or compatible devices to be controlled from one compact transmitter.

NICE specifies an estimated transmission range of approximately 200 metres outdoors and 35 metres indoors under suitable conditions. The MYGO4 is powered by a replaceable CR2430 3V lithium battery with an estimated service life of approximately 3 years at 10 transmissions per day.

NICE MYGO4 Key Features

• Original NICE MyGO transmitter
• Official model: MYGO4
• 4 programmable command buttons
• 433.92 MHz radio frequency
• NICE O-Code radio encoding
• Unidirectional transmitter
• Compatible with NICE Opera functions on suitable receivers
• Enabling Code transmitter-management function
• Supports Mode 1, Mode 2 and Extended Mode 2 memorisation
• Can be programmed with NICE Pro-View
• Supports MyNice Pro professional programming workflows
• Low-battery warning through red LED
• Estimated range approximately 200 m outdoors
• Estimated range approximately 35 m indoors
• CR2430 3V lithium battery
• Approx. 3-year battery life at 10 transmissions/day
• Radiated power less than 10 mW ERP
• IP30 protection
• Operating temperature -5°C to +55°C
• Compact 72 × 34 × 11 mm housing
• Weight approximately 20 g
• Key-ring string accessory supported

NICE MYGO4 Technical Specifications

Brand	NICE
Series	MyGO
Model	MYGO4
Product Type	Unidirectional Radio Transmitter
Channels	4
Frequency	433.92 MHz
Default Radio Encoding	NICE O-Code
Additional Encodings	ET Blue, Peccinin and Linear where supported and correctly programmed
Estimated Outdoor Range	Approx. 200 m
Estimated Indoor Range	Approx. 35 m
Power Supply	3V DC
Battery	CR2430 Lithium
Estimated Battery Life	Approx. 3 Years at 10 Transmissions/Day
Radiated Power	< 10 mW ERP
Operating Temperature	-5°C to +55°C
Protection Rating	IP30
Dimensions	72 × 34 × 11 mm
Weight	Approx. 20 g

4-Channel NICE Gate Remote

The NICE MYGO4 provides four programmable radio channels.

Depending on the receiver and control-unit configuration, individual buttons can be associated with different compatible automation commands.

Example applications include:

• Button 1 – Main sliding gate
• Button 2 – Pedestrian opening
• Button 3 – Garage door
• Button 4 – Parking barrier or second gate

The remote itself does not force these functions. The actual command associated with each button is determined by the receiver and automation control unit.

433.92 MHz Radio Frequency

The NICE MYGO4 operates at 433.92 MHz.

Frequency alone does not guarantee compatibility. The installed NICE receiver must also support MYGO's O-Code radio system or another encoding specifically supported by the transmitter and receiver configuration.

NICE O-Code Radio Encoding

MYGO4 is factory-programmed to operate with receivers using NICE O-Code unidirectional radio encoding.

O-Code is part of the NICE Opera radio-control ecosystem and supports advanced transmitter-management functions on compatible receiver systems.

Additional Encoding Support

The current NICE MYGO manual states that, for markets requiring them and after suitable programming, MYGO transmitters can also support:

• ET Blue
• Peccinin
• Linear

These additional protocols should not be advertised as automatically active from the factory. They require the correct encoding-switch procedure and compatible receiver.

Important FloR Compatibility Note

Do not automatically describe MYGO4 as a traditional FloR remote.

The official MYGO manual identifies the normal factory encoding as O-Code, with ET Blue, Peccinin and Linear available through suitable programming. Compatibility should therefore be checked against the actual receiver rather than assumed from the 433.92 MHz frequency alone.

Unidirectional MYGO4

The standard MYGO4 is a unidirectional transmitter.

It sends commands to the receiver but does not provide bidirectional confirmation of gate position or successful command reception.

MYGO4 Is Not MYGO4BD

This is an important distinction for your product page.

MYGO4 is the standard 4-channel unidirectional model.

MYGO4BD is the separate 4-channel bidirectional model.

Do not advertise the standard MYGO4 as providing vibration confirmation, open/closed gate-status indication or bidirectional feedback.

MYGO4 vs MYGO4BD

Feature	MYGO4	MYGO4BD
Channels	4	4
Frequency	433.92 MHz	433.92 MHz
Transmission	Unidirectional	Bidirectional
Encoding	O-Code	BD / O-Code
Gate Status Feedback	No	Yes, with compatible bidirectional receiver
Command Confirmation	Transmission LED only	Feedback supported on compatible system
Battery	CR2430	CR2430

Estimated 200 m Outdoor Range

NICE specifies an estimated MYGO range of approximately 200 metres outdoors under suitable conditions.

This is an estimated maximum and should not be presented as a guaranteed operating distance.

Estimated 35 m Indoor Range

The official estimated indoor range is approximately 35 metres.

Actual range can be reduced by concrete walls, steel structures, underground parking areas, receiver antenna position and other equipment operating on the same frequency.

Radio Range Depends on Installation Conditions

NICE specifically states that transmitter range and receiver reception capacity can be strongly affected by other devices operating at the same frequency.

For this reason, actual working distance in Dubai, Sharjah, Abu Dhabi or other UAE locations may be shorter than the stated open-space range.

CR2430 Lithium Battery

The MYGO4 uses one replaceable 3V CR2430 lithium battery.

This is important because it is different from several older NICE transmitters that use CR2032 or A23 batteries.

Approx. 3-Year Battery Life

NICE specifies approximately 3 years of battery life based on 10 command transmissions per day.

Actual battery life can vary according to daily usage, battery quality and operating temperature.

Low-Battery Warning LED

The MYGO transmitter includes a red signalling LED.

NICE states that the information LED can flash red to indicate a low-battery condition during transmission.

If remote-control range becomes noticeably shorter or the LED indicates low battery, the CR2430 battery should be checked and replaced if necessary.

IP30 Protection

The NICE MYGO4 has an official IP30 protection rating.

NICE describes it as suitable for household indoor use or protected outdoor areas under cover.

It should not be treated as waterproof and should not be exposed directly to rain or excessive moisture.

Operating Temperature

The official operating-temperature range is approximately -5°C to +55°C.

In UAE use, avoid leaving the remote for prolonged periods in direct sunlight on a vehicle dashboard because the temperature inside a closed vehicle can exceed the transmitter's rated operating range.

Compact 72 × 34 × 11 mm Design

The NICE brochure specifies dimensions of approximately 72 × 34 × 11 mm and a weight of approximately 20 grams.

The current instruction manual text extraction sometimes displays the height as “110 mm”; the NICE brochure clearly gives the compact housing as approximately 11 mm thick, so 72 × 34 × 11 mm is the correct sales-page value.

NICE Enabling Code

The MYGO transmitter supports an Enabling Code procedure.

On compatible receiver systems, a new transmitter can receive the enabling information from a transmitter that is already memorised.

This can simplify the process of adding an authorised replacement or additional remote.

Remote-to-Remote Memorisation

NICE officially documents memorisation through the Enabling Code received from a previously memorised transmitter.

The exact procedure depends on the receiver and control unit, so one universal remote-copy procedure should not be advertised for every NICE automation system.

Mode 1 Programming

In Mode 1, all transmitter buttons are memorised together and automatically associated with the standard commands managed by the control unit.

The exact button-to-command assignments depend on the control-unit configuration.

Mode 2 Programming

In Mode 2, a single MYGO4 button can be memorised and associated with a specific command supported by the control unit.

This is useful when one button should control a pedestrian opening or another selected automation command.

Extended Mode 2

NICE also supports Extended Mode 2 on compatible systems.

This provides access to a wider list of commands supported by the connected automation controller.

Step-by-Step Function

A MYGO4 button may be programmed to the control unit's Step-by-Step command.

Depending on controller settings, this may operate a sequence such as:

Open → Stop → Close → Stop

The sequence belongs to the automation controller, not to the MYGO4 transmitter itself.

Pedestrian Opening

One MYGO4 channel can be assigned to partial or pedestrian opening when the installed NICE control board provides that function.

This allows a gate to open only the programmed pedestrian distance rather than completing a full vehicle opening.

Open and Hold Functions

Some NICE controllers support functions that can keep an automation open or operate specific open commands.

A MYGO4 button may be assigned to such commands where they are available.

Do not describe Open & Hold as an automatic built-in feature of every MYGO4 installation.

NICE Pro-View Programming

The current MYGO manual confirms that MYGO transmitters can be programmed with the NICE Pro-View device.

This provides professional installers with advanced transmitter configuration and management capabilities.

MyNice Pro App

NICE also promotes MYGO programming workflows through the MyNice Pro App together with Pro-View.

On suitable systems, installers can pre-pair compatible remote controls with plug-in receivers and manage transmitter programming more efficiently.

MYGO4 vs MYGO4C

Feature	MYGO4	MYGO4C
Channels	4	4
Frequency	433.92 MHz	433.92 MHz
Encoding	O-Code	O-Code
Sequential Coding	Standard transmitter	Yes, for multiple insertion

The MYGO4C is the sequential-coded version intended to simplify larger multiple-transmitter installations such as apartment buildings.

MYGO4 vs MYGO4FM

Feature	MYGO4	MYGO4FM
Channels	4	4
Frequency	433.92 MHz	868.46 MHz
Encoding	O-Code	O-Code / FM version
Typical Use	Standard compatible NICE installations	Locations where improved resistance to radio interference is desirable

Do not confuse MYGO4 with MYGO4FM. They operate on different radio frequencies.

MYGO4 vs ERA ONE ON4E

Both can provide four radio channels, but they belong to different NICE transmitter generations.

• MYGO4: current MyGO design, O-Code, CR2430, 433.92 MHz
• ON4E: ERA ONE family, O-Code, 433.92 MHz

Receiver compatibility and preferred transmitter generation should be checked before replacement.

Compatibility Depends on the Receiver

When replacing a NICE remote, do not check only the gate motor model.

The most important component is the radio receiver installed in the automation system.

The same NICE gate motor can be fitted with different radio receivers depending on installation date, control board and accessories.

NICE MYGO4 Applications

• Sliding gate motors
• Swing gate motors
• Garage door openers
• Parking gate barriers
• Automatic road barriers
• Residential villa gates
• Apartment parking systems
• Commercial properties
• Warehouses and factories
• Gated communities

NICE MYGO4 for Sliding Gate Motors

The MYGO4 can operate compatible NICE sliding gate automation systems when a suitable O-Code receiver is installed.

Compatibility should be confirmed from the receiver rather than simply assuming that every NICE sliding motor accepts MYGO4.

NICE MYGO4 for Swing Gates

The transmitter can also operate compatible NICE swing gate systems, including suitable WINGO, TOONA, TOO, HOPP and underground-gate installations when the appropriate radio receiver is installed.

NICE MYGO4 for Garage Door Openers

The MYGO4 can operate compatible NICE garage-door automation systems equipped with a supported O-Code receiver.

NICE MYGO4 for Parking Barriers

The MYGO4 can be used with compatible NICE parking barriers and road barriers where the installed radio receiver supports MYGO/O-Code operation.

Replacement NICE Gate Remote UAE

The NICE MYGO4 is suitable as an additional or replacement transmitter for compatible automation systems.

Before ordering a replacement remote, check:

• Existing transmitter model
• Receiver model
• 433.92 MHz frequency
• O-Code compatibility
• Whether receiver access is available
• Whether Enabling Code memorisation is supported

Lost NICE MYGO4 Remote

If an existing MYGO4 is lost, adding a replacement transmitter does not automatically guarantee that the missing transmitter has been removed from receiver memory.

For security-sensitive installations, the lost transmitter should be deleted or disabled through the receiver or compatible NICE professional transmitter-management procedure whenever the system supports this function.

Recommended MYGO4 UAE Package

• 1 × NICE MYGO4 4-Channel Remote Control
• 1 × Pre-Installed CR2430 Lithium Battery
• Key-Ring String if Included with Current Stock
• User Instructions if Physically Included

Important: Programming service should be shown separately if it is an additional service rather than part of the factory remote-control package.

NICE MYGO4 Programming Service UAE

Programming support is available for compatible NICE MYGO4 gate remote controls.

Depending on the installed system, programming can be performed directly through the receiver, through a previously authorised transmitter using Enabling Code procedures, or with compatible NICE professional programming tools.

MYGO4 Remote Not Working?

If the remote stops operating the automation, check:

• CR2430 battery condition
• Red signalling LED operation
• Whether another transmitter still works
• Automation and receiver power supply
• Receiver antenna condition
• Whether MYGO4 remains memorised
• Possible local 433.92 MHz interference

Why Choose NICE MYGO4?

• Current NICE MyGO transmitter family
• 4 programmable channels
• 433.92 MHz frequency
• O-Code unidirectional encoding
• NICE Opera support on compatible systems
• Enabling Code memorisation support
• Mode 1, Mode 2 and Extended Mode 2 programming
• Pro-View programming support
• MyNice Pro professional workflow support
• Estimated 200 m outdoor range
• Estimated 35 m indoor range
• CR2430 replaceable battery
• Approx. 3-year battery life
• Low-battery warning LED
• Compact 72 × 34 × 11 mm housing
• Only approximately 20 g
• Programming support available in UAE

Buy NICE MYGO4 Remote Control UAE

Buy the NICE MYGO4 4-channel gate remote control in UAE for compatible NICE sliding gates, swing gates, garage door openers, parking barriers and access automation systems.

Remote supply, compatibility checking and programming support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Frequently Asked Questions

What is NICE MYGO4?
MYGO4 is a 4-channel 433.92 MHz unidirectional O-Code remote-control transmitter from the NICE MyGO family.

How many buttons does MYGO4 have?
It has 4 programmable command buttons.

What frequency does MYGO4 use?
It operates at 433.92 MHz.

What radio coding does MYGO4 use?
The standard factory coding is NICE O-Code.

Is MYGO4 bidirectional?
No. Standard MYGO4 is unidirectional. The separate MYGO4BD model is bidirectional.

Does MYGO4 show whether the gate is open or closed?
No. Standard MYGO4 does not provide bidirectional gate-status feedback.

What is the estimated range?
NICE specifies approximately 200 m outdoors and 35 m indoors under suitable conditions.

What battery does MYGO4 use?
One CR2430 3V lithium battery.

How long does the battery last?
Approximately 3 years at 10 transmissions per day.

What is the protection rating?
MYGO4 is rated IP30 and should be used indoors or in protected outdoor locations.

What are the dimensions?
Approximately 72 × 34 × 11 mm.

How much does MYGO4 weigh?
Approximately 20 grams.

Can MYGO4 control four gates?
Potentially yes. Each channel can be programmed for a compatible receiver or command, depending on the installed system.

Can a MYGO4 button be used for pedestrian opening?
Yes, where the automation control unit provides a pedestrian-opening command and that button is programmed to it.

Can MYGO4 be programmed from another remote?
On compatible NICE systems, an already memorised transmitter can transfer an Enabling Code to a new transmitter.

Can MYGO4 be programmed using Pro-View?
Yes. NICE officially supports MYGO programming with Pro-View and compatible MyNice Pro workflows.

Does every 433.92 MHz NICE receiver work with MYGO4?
No. Frequency alone does not guarantee compatibility. The receiver must support the appropriate radio encoding.

Do you provide NICE MYGO4 programming in UAE?
Yes. Programming and compatibility support are available for compatible NICE receiver systems throughout the UAE.