NICE ERA INTI INTI2L Lilac Gate Remote – 2 Channel

NICE INTI2L Lilac 433.92 MHz O-Code Remote UAE

The NICE ERA INTI INTI2L is a compact lilac 2-channel 433.92 MHz monodirectional gate remote control designed for compatible NICE sliding gates, swing gates, garage door openers, parking barriers and access automation systems.

INTI2L belongs to the colourful NICE ERA INTI transmitter family and uses advanced 72-bit O-Code rolling-code technology. NICE also confirms compatibility with receivers using FloR coding, making INTI2L suitable for many existing and newer NICE automation installations.

The INTI2L provides two independent radio channels, uses a replaceable CR2032 3V lithium battery, and is designed as an ultra-compact everyday remote for residential and commercial gate automation.

NICE ERA INTI INTI2L Key Features

• Original NICE ERA INTI transmitter
• Official model: INTI2L
• Lilac / pink colour
• 2 independent radio channels
• 433.92 MHz operating frequency
• 72-bit O-Code rolling-code technology
• Compatible with NICE FloR-coded receivers
• Monodirectional radio transmission
• Compatible with NICE Opera ecosystem
• Identity Code management
• Certificate management
• Self-learning radio technology
• Built-in proximity receiver functionality
• Remote memorisation on compatible Opera installations
• CR2032 lithium battery
• Compact miniature design
• Suitable for gate, garage and parking-barrier automation

NICE INTI2L Technical Specifications

Brand	NICE
Series	ERA INTI
Model	INTI2L
Product Type	Monodirectional Radio Remote Control
Colour	Lilac / Pink
Channels	2
Frequency	433.92 MHz
Radio Coding	72-bit O-Code Rolling Code
FloR Compatibility	Yes
NICE Opera Compatibility	Yes
Power Supply	3V DC
Battery	CR2032 Lithium
Estimated Outdoor Range	Approx. 150 m under suitable conditions
Estimated Indoor Range	Approx. 30 m under suitable conditions
Estimated Battery Life	Approx. 2 Years at 10 Transmissions/Day
Protection Rating	IP40
Dimensions	30 × 56 × 9 mm
Weight	Approx. 14 g

Lilac INTI2L Model

The model code INTI2L specifically identifies the lilac / pink 2-channel version of the NICE ERA INTI transmitter family.

NICE uses separate model codes for each colour, so INTI2L should not be described as black, blue, red, green or yellow.

NICE ERA INTI Colour Options

Model	Channels	Colour
INTI2	2	Black
INTI2B	2	Blue
INTI2G	2	Green
INTI2L	2	Lilac / Pink
INTI2R	2	Red
INTI2Y	2	Yellow

2-Channel NICE Gate Remote

The NICE INTI2L provides two independent command buttons.

Depending on receiver programming, each button can operate a separate automation or a different function of the same automation.

• Button 1 – Main sliding or swing gate
• Button 2 – Garage door, parking barrier or second gate

433.92 MHz Radio Frequency

The INTI2L operates at 433.92 MHz.

Frequency alone does not guarantee compatibility. The installed NICE receiver must also support O-Code or compatible FloR radio coding.

72-Bit O-Code Rolling Code

NICE ERA INTI transmitters use 72-bit O-Code rolling-code encoding.

The transmitted radio code changes according to an authorised rolling-code sequence rather than repeatedly transmitting a simple fixed code.

This provides stronger radio security than basic fixed-code transmitters.

Recommended Security Wording

For a professional product page, use:

“72-bit O-Code rolling-code technology designed to improve radio security and reduce the risk of unauthorised duplication.”

Avoid absolute claims such as “100% anti-cloning” or “impossible to clone”.

Compatible with NICE FloR Receivers

NICE officially confirms that ERA INTI O-Code transmitters are also compatible with receivers using NICE FloR encoding.

This allows INTI2L to be used as an additional or replacement transmitter on many existing NICE installations.

Important FloR Compatibility Note

When INTI2L is used with a traditional FloR receiver, normal radio commands can be available, but advanced Opera transmitter-management functions depend on the receiver and complete system configuration.

NICE Opera System

ERA INTI forms part of the NICE Opera control ecosystem.

On compatible systems, Opera supports functions such as:

• Identity Code management
• Certificate management
• Enable Code procedures
• Remote transmitter memorisation
• Transmitter replacement management
• Professional programming procedures

Built-In Proximity Receiver

NICE describes the ERA INTI transmitter family as having an integrated proximity receiver.

This functionality supports compatible professional transmitter-management and code-exchange procedures within the NICE Opera ecosystem.

Remote-to-Remote Memorisation

On compatible NICE Opera receiver installations, a new INTI2L can be enabled using an already-authorised transmitter through the supported code-exchange procedure.

The exact steps depend on the installed receiver and its programming settings.

Lost or Stolen Transmitter Management

NICE Opera documentation describes professional procedures for replacing a lost or stolen ERA INTI transmitter while maintaining the functions assigned to the previous remote.

Where supported, the old transmitter can be disabled by increasing the priority level assigned to the replacement transmitter.

This functionality depends on the installed receiver and NICE system generation.

Fast Radio Command Processing

NICE states that the ERA INTI data-processing and recognition system can provide approximately a threefold reduction in automation response time compared with previous radio-processing systems.

This refers to the processing and recognition of the radio command.

It does not mean that the physical gate motor moves three times faster.

Estimated Outdoor Range

The ERA INTI family has an estimated outdoor radio range of approximately 150 metres under suitable conditions.

This should be treated as an estimated maximum rather than a guaranteed operating distance.

Estimated Indoor Range

The estimated indoor range is approximately 30 metres.

Concrete walls, steel structures, underground parking areas and radio interference can reduce actual operating range.

What Can Reduce INTI2L Range?

• Concrete walls
• Steel gates
• Metal cladding
• Underground parking areas
• Nearby 433.92 MHz radio equipment
• Poor receiver antenna positioning
• Damaged receiver antenna
• Weak CR2032 battery
• Electrical and radio interference

CR2032 Lithium Battery

The NICE INTI2L uses one replaceable CR2032 3V lithium battery.

If radio range decreases or transmission becomes intermittent, checking or replacing the battery is normally the first troubleshooting step.

Estimated Battery Life

The ERA INTI family is typically specified at approximately 2 years of battery life based on 10 transmissions per day.

Actual battery life depends on usage, battery quality and environmental conditions.

Ultra-Compact Design

The INTI2L measures approximately 30 × 56 × 9 mm and weighs only approximately 14 grams.

This makes it significantly smaller than many conventional gate remote controls and convenient for key-ring use.

IP40 Protection

The transmitter has an IP40 protection rating.

INTI2L is intended for use in protected environments and should not be considered waterproof.

Monodirectional Remote Control

INTI2L is a monodirectional transmitter.

It sends commands to the compatible radio receiver but does not provide bidirectional open/closed gate-status feedback.

Important OXIBD Note

Do not advertise INTI2L as a bidirectional remote simply because the automation has an OXIBD receiver.

If a compatible OXIBD configuration accepts O-Code or FloR-compatible monodirectional transmitters, INTI2L can provide standard commands, but the transmitter itself remains monodirectional.

Compatibility Depends on the Receiver

When selecting a replacement NICE remote, the most important compatibility check is the radio receiver installed in the automation.

Do not select the remote only from the gate motor model because the same NICE motor can have different radio receivers depending on installation date and configuration.

NICE INTI2L Applications

• Sliding gate motors
• Swing gate motors
• Garage door openers
• Parking gate barriers
• Rolling shutter systems with compatible NICE receiver
• Villa gate automation
• Apartment parking gates
• Gated communities
• Commercial entrances
• Office parking systems

INTI2L vs INTI2G vs INTI2R vs INTI2Y

Model	Colour	Channels	Frequency	Coding
INTI2L	Lilac / Pink	2	433.92 MHz	72-bit O-Code
INTI2G	Green	2	433.92 MHz	72-bit O-Code
INTI2R	Red	2	433.92 MHz	72-bit O-Code
INTI2Y	Yellow	2	433.92 MHz	72-bit O-Code
INTI2B	Blue	2	433.92 MHz	72-bit O-Code
INTI2	Black	2	433.92 MHz	72-bit O-Code

The technical specifications are essentially the same. The principal difference is the official NICE colour/model code.

INTI2L vs ERA ONE ON2E

Feature	INTI2L	ON2E
Series	ERA INTI	ERA ONE
Channels	2	2
Frequency	433.92 MHz	433.92 MHz
Primary Coding	72-bit O-Code	72-bit O-Code
Transmission	Monodirectional	Monodirectional
Outdoor Range	Approx. 150 m	Approx. 200 m
Indoor Range	Approx. 30 m	Approx. 35 m
Dimensions	30 × 56 × 9 mm	45 × 56 × 11 mm
Weight	Approx. 14 g	Approx. 18 g

Choose INTI2L when a very compact lilac transmitter is preferred. ON2E uses the larger ERA ONE housing and has a higher official estimated range.

INTI2L vs FLO2RE

Both operate at 433.92 MHz, but their primary radio coding differs:

• INTI2L: 72-bit O-Code rolling code with FloR compatibility
• FLO2RE: traditional NICE FloR rolling-code transmitter

For newer O-Code / Opera installations, INTI2L is generally the more modern transmitter family.

Replacement NICE Lilac Gate Remote UAE

The NICE INTI2L can be used as a replacement or additional transmitter where the installed receiver supports compatible O-Code or FloR radio coding.

Before ordering, check:

• Existing transmitter model
• Radio receiver model
• 433.92 MHz frequency
• O-Code / FloR compatibility
• Whether receiver access is available
• Whether remote memorisation is enabled

Recommended INTI2L UAE Package

• 1 × NICE ERA INTI INTI2L Lilac Remote Control
• 1 × Pre-Installed CR2032 Lithium Battery
• User Instructions if Physically Included

Important: Programming service should be listed separately if it is an additional UAE service rather than part of the product package.

NICE INTI2L Programming Service UAE

Programming support is available for compatible NICE INTI2L gate remote controls.

Depending on the installed receiver, programming may be completed directly at the receiver, through an already-authorised transmitter or through supported NICE Opera professional procedures.

Remote Not Working?

If an INTI2L no longer operates the automation, check:

• CR2032 battery condition
• Remote LED operation
• Whether other transmitters still work
• Automation power supply
• Radio receiver antenna condition
• Whether the remote remains stored in receiver memory
• Possible local radio interference

Why Choose NICE ERA INTI INTI2L?

• Original NICE ERA INTI transmitter
• Official lilac INTI2L model
• 2 independent channels
• 433.92 MHz radio frequency
• 72-bit O-Code rolling code
• FloR receiver compatibility
• NICE Opera compatibility
• Monodirectional radio technology
• Compact miniature housing
• CR2032 replaceable battery
• Only approximately 14 g
• Distinctive lilac / pink design
• Programming support available in UAE

Buy NICE ERA INTI INTI2L Lilac Remote UAE

Buy the NICE ERA INTI INTI2L lilac gate remote control in UAE for compatible NICE sliding gates, swing gates, garage door openers, parking barriers and access automation systems.

Remote supply, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE INTI2L?
INTI2L is the lilac / pink 2-channel 433.92 MHz O-Code rolling-code transmitter from the NICE ERA INTI family.

What colour is INTI2L?
INTI2L is the official lilac / pink ERA INTI version.

How many channels does INTI2L have?
It has 2 channels / 2 command buttons.

What frequency does INTI2L use?
It operates at 433.92 MHz.

What coding does INTI2L use?
NICE specifies 72-bit O-Code rolling code.

Is INTI2L compatible with FloR receivers?
Yes. NICE confirms ERA INTI O-Code transmitters are compatible with NICE FloR-coded receivers.

Is INTI2L bidirectional?
No. INTI2L is a monodirectional transmitter.

What is the estimated range?
Approximately 150 m outdoors and 30 m indoors under suitable conditions.

What battery does INTI2L use?
One CR2032 3V lithium battery.

How long does the battery last?
Approximately 2 years at 10 transmissions per day, depending on usage and conditions.

What are the dimensions?
Approximately 30 × 56 × 9 mm.

How much does INTI2L weigh?
Approximately 14 grams.

Is INTI2L waterproof?
No. It has an IP40 rating and should be used in protected environments.

Can INTI2L operate two gates?
Yes, provided each button is programmed to a compatible receiver for the required command.

Can INTI2L work with NICE OXI?
Yes, with compatible O-Code or FloR-configured OXI receiver systems.

Does INTI2L provide status feedback with OXIBD?
No. INTI2L remains monodirectional even where a compatible OXIBD receiver accepts its radio commands.

Can INTI2L be programmed from an existing remote?
Yes, on compatible NICE Opera receiver installations. The exact procedure depends on receiver configuration.

Can a lost INTI2L be disabled?
Compatible NICE Opera installations can support transmitter replacement and priority-management procedures. Older receiver systems may require direct receiver-memory access.

Do you provide NICE INTI2L programming in UAE?
Yes. Programming and technical support are available for compatible NICE receiver systems throughout the UAE.