NICE ERA INTI INTI2B Blue Gate Remote – 2 Channel

NICE INTI2B Blue 433.92 MHz O-Code Remote UAE

The NICE ERA INTI INTI2B is a compact blue 2-channel 433.92 MHz monodirectional gate remote control designed for compatible NICE sliding gates, swing gates, garage door openers, parking barriers and access automation systems.

INTI2B belongs to the colourful NICE ERA INTI transmitter family and uses advanced 72-bit O-Code rolling-code technology. NICE also confirms compatibility with receivers using FloR coding, allowing the transmitter to work with many existing and newer NICE automation systems.

The blue INTI2B provides two independent radio channels, uses a replaceable CR2032 3V lithium battery, has an estimated radio range of approximately 150 metres outdoors and 30 metres indoors, and measures only approximately 30 × 56 × 9 mm.

NICE ERA INTI INTI2B Key Features

• Original NICE ERA INTI remote control
• Official model: INTI2B
• Blue colour
• 2 independent radio channels
• 433.92 MHz carrier frequency
• 72-bit O-Code rolling-code technology
• Compatible with NICE FloR radio coding
• Monodirectional transmitter
• Compatible with NICE Opera ecosystem
• Identity Code management
• Certificate management
• Self-learning radio technology
• Compatible with professional O-Box programming procedures
• Estimated outdoor range: approximately 150 m
• Estimated indoor range: approximately 30 m
• 3V DC power supply
• CR2032 lithium battery
• Approx. 24-month battery life at 10 transmissions per day
• IP40 protection
• Compact 30 × 56 × 9 mm dimensions
• Weight approximately 14 g
• Suitable for gate, garage and barrier automation

NICE INTI2B Technical Specifications

Brand	NICE
Series	ERA INTI
Model	INTI2B
Product Type	Monodirectional Radio Remote Control
Colour	Blue
Channels	2
Frequency	433.92 MHz
Radio Coding	72-bit O-Code Rolling Code
FloR Compatibility	Yes
Opera Compatibility	Yes
Estimated Outdoor Range	Approx. 150 m
Estimated Indoor Range	Approx. 30 m
Power Supply	3V DC
Battery	CR2032 Lithium
Estimated Battery Life	Approx. 24 Months at 10 Transmissions/Day
Protection Rating	IP40
Dimensions	30 × 56 × 9 mm
Weight	Approx. 14 g

Blue INTI2B Model

The model code INTI2B specifically identifies the blue 2-channel version of the NICE ERA INTI transmitter.

This is important for your product page because NICE uses separate model codes for each colour. INTI2B should therefore always be described as blue.

NICE ERA INTI Colour Codes

Model	Channels	Colour
INTI2	2	Black
INTI2B	2	Blue
INTI2G	2	Green
INTI2L	2	Lilac
INTI2R	2	Red
INTI2Y	2	Yellow

2-Channel Gate Remote Control

The NICE INTI2B provides two independent radio buttons.

Depending on the receiver programming, the buttons can control two separate commands, for example:

• Button 1 – Main gate
• Button 2 – Garage door

They can also be assigned to different functions on the same compatible automation.

433.92 MHz Radio Frequency

The INTI2B operates at 433.92 MHz.

Frequency alone does not guarantee compatibility. The installed receiver must also support the NICE O-Code or compatible FloR radio protocol.

72-Bit O-Code Rolling Code

NICE specifies 72-bit O-Code rolling-code technology for ERA INTI transmitters.

The radio code changes according to the authorised rolling-code sequence, offering better protection than a simple fixed-code transmitter.

A professional product-page description is:

“72-bit O-Code rolling-code technology designed to reduce the risk of unauthorised radio duplication.”

Compatible with NICE FloR

NICE confirms that ERA INTI O-Code transmitters are also compatible with receivers using NICE FloR encoding.

This helps the INTI2B work as an additional or replacement transmitter on many existing NICE automation systems.

Important FloR Compatibility Note

When INTI2B is used with a traditional FloR receiver, normal automation commands can be available, but advanced NICE Opera functions depend on the receiver and complete system configuration.

Monodirectional Remote Control

The INTI2B is officially classified by NICE as a monodirectional transmitter.

This means it sends commands to the receiver but does not provide bidirectional gate-status feedback to the user.

INTI2B Is Not a Bidirectional Remote

Do not describe INTI2B as a bidirectional transmitter.

If a bidirectional NICE remote is required, a suitable current NICE bidirectional transmitter and compatible receiver should be selected instead.

NICE Opera Compatibility

The ERA INTI family is compatible with the NICE Opera system.

On compatible installations, Opera supports functions such as:

• Identity Code management
• Certificate management
• Enable Code procedures
• Remote memorisation
• Transmitter replacement management
• O-Box programming

Remote-to-Remote Programming

On compatible NICE Opera installations, a new INTI2B may be authorised using an existing transmitter already stored in the receiver.

The exact procedure depends on the receiver configuration and whether remote memorisation has been enabled.

Direct Receiver Programming

The INTI2B can also be memorised directly into a compatible NICE receiver using the receiver's programming procedure.

Direct receiver programming is generally the safest method when the control panel is accessible.

O-Box Programming

Compatible ERA INTI transmitters can be managed using the NICE O-Box professional programming interface.

This can simplify transmitter management for installations with multiple authorised users.

Lost or Stolen Remote Management

NICE Opera-compatible systems can support advanced replacement procedures for a lost or stolen transmitter.

A replacement transmitter may be prepared with the required functions and assigned a higher priority so that the previous transmitter can be disabled by the compatible system.

This functionality depends on the exact receiver and Opera configuration and should not be promised for every older FloR installation.

Estimated 150 m Outdoor Range

NICE specifies an estimated range of approximately 150 metres outdoors under suitable conditions.

The figure is an estimate rather than a guaranteed operating distance.

Estimated 30 m Indoor Range

The official estimated indoor range is approximately 30 metres.

Concrete walls, steel structures, underground parking areas and other radio-frequency devices may significantly reduce the operating range.

Radio Range Can Vary

NICE specifically warns that transmitter range and receiver performance can be affected by devices operating on the same frequency and by the position of the system antenna.

For this reason, actual UAE site range may be shorter than the laboratory or open-space figure.

CR2032 Lithium Battery

The INTI2B uses one replaceable 3V CR2032 lithium battery.

The battery can be replaced when remote range decreases or the transmitter no longer operates reliably.

Approx. 24-Month Battery Life

Current NICE technical data gives an estimated battery life of approximately 24 months based on 10 transmissions per day.

Actual battery life depends on frequency of use, battery quality and environmental conditions.

Compact 30 × 56 × 9 mm Design

The NICE INTI2B measures only approximately 30 × 56 × 9 mm.

Its compact shape is one of the main advantages of the ERA INTI family.

Only 14 g

The current NICE technical specification gives an approximate weight of only 14 grams.

This makes the INTI2B particularly convenient as a lightweight keyring gate remote.

IP40 Protection

The transmitter has an official IP40 rating.

It is intended for protected environments and should not be considered waterproof.

Avoid exposing the remote directly to rain, water or excessive moisture.

Compatibility Depends on the Receiver

When replacing a NICE gate remote, the most important compatibility check is the receiver installed in the automation system.

Do not select a remote only by looking at the gate motor model.

The same NICE motor can be installed with different radio receivers depending on installation date and system configuration.

NICE OXI Receiver Compatibility

INTI2B can operate with suitable NICE receiver configurations that support O-Code or FloR encoding, including selected OXI-family receivers.

The exact receiver coding should be checked before programming.

Important OXIBD Note

The INTI2B itself is monodirectional.

Where an OXIBD receiver accepts compatible O-Code/FloR monodirectional transmitters, INTI2B can provide standard automation commands, but it does not gain bidirectional feedback capability.

Do not advertise INTI2B as a bidirectional remote simply because an OXIBD receiver is installed.

NICE INTI2B Applications

• Sliding gate motors
• Swing gate motors
• Garage door openers
• Parking gate barriers
• Rolling shutters with compatible NICE receiver
• Villa gate automation
• Apartment parking gates
• Commercial entrances
• Office parking systems
• Gated communities

Sliding Gate Motor Compatibility

The INTI2B can operate compatible NICE sliding-gate systems when their radio receiver supports O-Code or FloR-compatible transmitters.

Swing Gate Compatibility

The blue INTI2B can also be used with compatible NICE swing-gate systems fitted with the appropriate radio receiver.

Garage Door Compatibility

INTI2B can operate compatible NICE garage door openers where an O-Code or FloR-compatible radio receiver is installed.

Parking Barrier Compatibility

The remote can also operate compatible NICE parking barriers where the correct NICE radio receiver is installed.

INTI2B vs INTI2

Feature	INTI2B	INTI2
Colour	Blue	Black
Channels	2	2
Frequency	433.92 MHz	433.92 MHz
Coding	72-bit O-Code	72-bit O-Code
Range	150 m Outdoor / 30 m Indoor	150 m Outdoor / 30 m Indoor
Battery	CR2032	CR2032
Dimensions	30 × 56 × 9 mm	30 × 56 × 9 mm

The technical specification is effectively the same. The main difference is the colour and official product code: INTI2B is blue, while INTI2 is black.

INTI2B vs ERA ONE ON2E

Feature	INTI2B	ON2E
Series	ERA INTI	ERA ONE
Channels	2	2
Frequency	433.92 MHz	433.92 MHz
Coding	72-bit O-Code	72-bit O-Code
Transmission	Monodirectional	Monodirectional
Outdoor Range	Approx. 150 m	Approx. 200 m
Indoor Range	Approx. 30 m	Approx. 35 m
Dimensions	30 × 56 × 9 mm	45 × 56 × 11 mm
Weight	14 g	18 g

Choose INTI2B when you prefer a smaller, lighter blue remote. Choose ON2E when the slightly higher official radio range and larger ERA ONE design are preferred.

INTI2B vs FLO2RE

Both can work with suitable NICE automation systems, but their primary coding is different.

• INTI2B: 72-bit O-Code, also compatible with FloR-coded receivers
• FLO2RE: traditional ERA FloR rolling-code transmitter

For newer O-Code/Opera installations, INTI2B is generally the more appropriate option.

NICE INTIKIT

NICE also offers INTIKIT, a radio package consisting of:

• 1 × Blue 2-channel ERA INTI transmitter
• 1 × Green 2-channel ERA INTI transmitter
• 1 × Red 2-channel ERA INTI transmitter
• 1 × NICE OX2 receiver

The blue transmitter supplied in this kit corresponds to the ERA INTI blue 2-channel family.

Replacement NICE Blue Gate Remote UAE

The NICE INTI2B can be used as a replacement or additional blue transmitter where the existing receiver supports the correct O-Code or FloR radio protocol.

Before ordering, check:

• Existing remote model
• Receiver model
• 433.92 MHz frequency
• O-Code / FloR compatibility
• Whether receiver access is available
• Whether remote memorisation is enabled

Recommended INTI2B UAE Package

• 1 × NICE ERA INTI INTI2B Blue Remote Control
• 1 × CR2032 Lithium Battery
• Programming Instructions if physically included

Important: Remote programming should be listed as a separate service if it is not included with the product.

Remote Programming Service UAE

Programming support is available for compatible NICE INTI2B blue gate remote controls throughout the UAE.

Depending on the installed system, programming may be performed directly through the receiver, using an existing authorised transmitter or through supported NICE Opera/O-Box procedures.

Remote Not Working?

If an INTI2B no longer operates the automation, check:

• CR2032 battery condition
• Remote LED operation
• Whether other remotes still operate the automation
• Gate motor or receiver power supply
• Receiver antenna condition
• Whether the remote remains stored in receiver memory
• Possible local radio interference

Why Choose NICE ERA INTI INTI2B?

• Original NICE ERA INTI transmitter
• Official blue model INTI2B
• 2 independent channels
• 433.92 MHz frequency
• 72-bit O-Code rolling code
• FloR receiver compatibility
• NICE Opera compatibility
• Monodirectional radio transmission
• Approx. 150 m outdoor range
• Approx. 30 m indoor range
• CR2032 replaceable battery
• Approx. 24-month battery life
• Compact 30 × 56 × 9 mm dimensions
• Only approximately 14 g
• Blue colour for easy identification
• Programming support available in UAE

Buy NICE ERA INTI INTI2B Blue Remote UAE

Buy the NICE ERA INTI INTI2B blue gate remote control in UAE for compatible NICE sliding gates, swing gates, garage doors, parking barriers and access automation systems.

Remote supply, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE INTI2B?
INTI2B is the blue 2-channel 433.92 MHz O-Code rolling-code transmitter from the NICE ERA INTI family.

What colour is INTI2B?
The official INTI2B model is blue.

How many channels does INTI2B have?
It has 2 channels / 2 buttons.

What frequency does INTI2B use?
It operates at 433.92 MHz.

What coding does INTI2B use?
NICE specifies 72-bit O-Code rolling code.

Is INTI2B compatible with FloR?
Yes. NICE confirms ERA INTI O-Code transmitters can work with compatible FloR-coded receivers.

Is INTI2B bidirectional?
No. It is officially a monodirectional transmitter.

What is the estimated range?
Approximately 150 m outdoors and 30 m indoors under suitable conditions.

What battery does INTI2B use?
One CR2032 3V lithium battery.

How long does the battery last?
Approximately 24 months at 10 transmissions per day according to current NICE data.

What are the dimensions?
Approximately 30 × 56 × 9 mm.

How much does INTI2B weigh?
Approximately 14 grams.

Is INTI2B waterproof?
No. It is rated IP40 and should be used in protected environments.

What is the difference between INTI2 and INTI2B?
The technical specifications are essentially the same. INTI2 is black, while INTI2B is blue.

Can INTI2B control two gates?
Yes, provided each button is programmed into a compatible receiver for the required automation.

Can INTI2B work with NICE OXI?
Yes, with compatible O-Code or FloR-configured OXI receiver systems.

Does INTI2B provide gate-status feedback with OXIBD?
No. INTI2B remains a monodirectional transmitter even where the receiver accepts its radio coding.

Do you provide INTI2B programming in UAE?
Yes. Programming and technical support can be provided for compatible NICE receiver systems throughout the UAE.