NICE FLO2R-S Gate Remote Control – 2 Channel

NICE FLO2R-S 433.92 MHz FloR Rolling Code Remote UAE

The NICE FLO2R-S is a classic 2-channel 433.92 MHz FloR rolling-code remote control designed for compatible NICE automatic gates, garage doors, parking barriers and access automation systems.

FLO2R-S belongs to the NICE FloR-S transmitter family and uses NICE FloR dynamic rolling-code encoding. The transmitter provides two independent command buttons and operates from a replaceable 12V A23 alkaline battery.

It is particularly suitable as an additional or replacement remote for existing NICE installations fitted with a compatible FloR receiver, including suitable SMXI and OXI receiver configurations.

NICE FLO2R-S Key Features

• Original NICE FloR-S transmitter family
• Official model: FLO2R-S
• 2 independent radio channels
• 433.92 MHz operating frequency
• NICE FloR dynamic rolling-code encoding
• Self-learning rolling-code system
• Designed for compatible NICE FloR receivers
• Compatible with suitable NICE SMXI receiver systems
• Compatible with suitable OXI receiver configurations
• Two programmable command buttons
• 12V A23 alkaline battery
• Estimated range up to approximately 200 m outdoors
• Estimated range approximately 35 m indoors
• Compact handheld design
• Suitable for gates, garages and barriers
• Replacement and additional transmitter programming supported

NICE FLO2R-S Technical Specifications

Brand	NICE
Family	FloR-S
Model	FLO2R-S
Product Type	Rolling-Code Radio Transmitter
Channels	2
Frequency	433.92 MHz
Radio Coding	NICE FloR Dynamic Rolling Code
Code Combinations	Approx. 4.5 × 10¹⁵
Power Supply	12V DC
Battery	A23 12V Alkaline
Estimated Outdoor Range	Approx. 200 m
Estimated Indoor Range	Approx. 35 m
Radiated Power	Approx. 1 mW ERP
Operating Temperature	Approx. -10°C to +55°C
Dimensions	Approx. 69 × 39 × 15.5 mm*
Weight	Approx. 31 g*

*Older official NICE FloR technical documentation lists approximately 69 × 39 × 15.5 mm and 31 g for the FloR transmitter housing. Some FLO2R-S market listings show approximately 72 × 40 × 15 mm. Exact housing dimensions can vary slightly by production revision, so the physical stock should be checked if dimensional accuracy is critical.

2-Channel NICE Remote Control

The NICE FLO2R-S has two independent command buttons.

Depending on receiver programming, the buttons can control:

• Two different gates
• A gate and garage door
• A gate and parking barrier
• Two commands on the same automation

The function of each button depends on how the transmitter is stored in the receiver.

433.92 MHz Radio Frequency

The FLO2R-S operates at 433.92 MHz.

Frequency alone does not guarantee compatibility. The receiver must also support NICE FloR encoding.

A 433.92 MHz remote using a different coding system may not work even though the frequency is identical.

NICE FloR Rolling Code Technology

The FLO2R-S uses NICE FloR dynamic rolling-code technology.

Unlike a basic fixed-code transmitter, the transmitted radio code changes according to the authorised rolling-code sequence.

This improves security and reduces the risk of simple unauthorised duplication.

Important Security Wording

Avoid absolute claims such as:

• “Impossible to clone”
• “100% anti-cloning”
• “Cannot be copied”

A safer and more professional wording is:

“NICE FloR rolling-code technology designed to improve radio security and reduce the risk of unauthorised duplication.”

Approximately 4.5 × 10¹⁵ Code Combinations

NICE technical documentation for the FloR radio family specifies digital encoding with approximately 4.5 × 10¹⁵ possible code combinations.

This large number of individual codes helps identify each authorised transmitter within a compatible FloR receiver system.

Estimated 200 m Outdoor Range

NICE documentation gives an estimated radio range of approximately 200 metres outdoors under suitable conditions.

This should not be presented as a guaranteed working distance because actual range depends strongly on the installation environment.

Estimated 35 m Indoor Range

The estimated indoor operating range is approximately 35 metres.

Walls, reinforced concrete, metal structures and radio interference can significantly reduce the usable distance.

What Can Reduce Remote Range?

• Concrete walls
• Steel gates
• Metal cladding
• Underground parking areas
• Nearby 433.92 MHz radio devices
• Poor receiver antenna position
• Damaged antenna or antenna cable
• Low A23 battery voltage
• Electrical or radio interference

12V A23 Alkaline Battery

The NICE FLO2R-S uses a replaceable 12V A23 alkaline battery.

This is different from newer NICE ERA ONE and ERA INTI remotes that commonly use a CR2032 lithium coin-cell battery.

When FLO2R-S radio range decreases noticeably, the A23 battery should be checked first.

NICE FloR-S Remote Family

Model	Channels	Frequency	Coding
FLO1R-S	1	433.92 MHz	FloR Rolling Code
FLO2R-S	2	433.92 MHz	FloR Rolling Code
FLO4R-S	4	433.92 MHz	FloR Rolling Code

The FLO2R-S is the 2-channel version and is generally the most convenient choice when two automation commands are required.

FLO2R-S vs FLO2RE

Feature	FLO2R-S	FLO2RE
Family	Original FloR-S	ERA FLOR
Channels	2	2
Frequency	433.92 MHz	433.92 MHz
Coding	FloR Rolling Code	FloR Rolling Code
Battery	12V A23	CR2032
Design	Classic FloR-S housing	Compact ERA FLOR housing

Both belong to the NICE FloR radio family, but FLO2RE is the newer compact ERA FLOR design.

FLO2R-S vs INTI2

The FLO2R-S and INTI2 both operate at 433.92 MHz, but their main coding systems are different.

• FLO2R-S: FloR rolling code
• INTI2: O-Code rolling code with FloR compatibility

For an existing older FloR installation, FLO2R-S is a direct family match. For newer NICE Opera/O-Code installations, an ERA INTI or ERA ONE transmitter may be more appropriate.

FLO2R-S vs ERA ONE ON2E

Feature	FLO2R-S	ON2E
Channels	2	2
Frequency	433.92 MHz	433.92 MHz
Primary Coding	FloR	72-bit O-Code
Battery	A23 12V	CR2032 3V
Generation	Classic FloR-S	ERA ONE

The ON2E belongs to the newer Opera/O-Code family, while FLO2R-S is primarily intended for classic NICE FloR installations.

NICE SMXI Receiver Compatibility

The NICE SMXI is a 433.92 MHz receiver designed for transmitters using FloR encoding.

NICE currently confirms that its SMXI programming procedure is valid for FloR-series transmitters.

This makes FLO2R-S an appropriate transmitter family for compatible SMXI receiver installations.

NICE OXI Receiver Compatibility

The NICE OXI receiver can support several Nice radio coding families, including FloR.

FLO2R-S can therefore be memorised when the OXI receiver is operating with a compatible FloR encoding family.

Important OXI Programming Rule

NICE states that OXI can memorise multiple coding families, but transmitters stored in the receiver must belong to the same active encoding family.

If the receiver is already configured for a different family, compatibility and memorisation should be checked before adding FLO2R-S.

Do Not Assume OXIBD Compatibility

Do not simply write “compatible with every OXIBD receiver”.

The exact receiver coding configuration should always be checked. Same frequency does not guarantee compatibility.

Remote Programming

The FLO2R-S can be programmed into a compatible NICE receiver using the memorisation procedure specified for that receiver.

Programming methods vary depending on receiver model.

Direct Receiver Programming

Where receiver access is available, direct programming from the receiver is normally the most reliable method.

The installer activates the receiver memorisation mode and then sends the required command from the FLO2R-S.

Remote-to-Remote Programming

Some compatible NICE FloR receiver installations support memorising a new transmitter using an existing authorised remote.

The exact sequence varies by receiver and control unit, so do not use one universal programming procedure for every NICE motor.

Lost Remote Management

If a FLO2R-S is lost, simply programming a replacement remote does not necessarily remove the lost transmitter from receiver memory.

For better security, the receiver memory should be accessed and the lost transmitter removed where the installed receiver supports individual deletion.

NICE OXI Individual Remote Deletion

Current NICE OXI programming support provides procedures for memorising a transmitter, deleting an individual transmitter and deleting the complete receiver memory.

This is useful when a remote has been lost or should no longer have access.

NICE SMXI Receiver

The SMXI receiver stores compatible FloR transmitters and supports up to 256 transmitters according to current NICE technical support information.

FLO2R-S can therefore be suitable for villas, apartment parking gates and multi-user FloR installations where SMXI is fitted.

Compatibility Depends on the Receiver

Do not select a replacement remote only by the gate-motor model.

The most important compatibility check is the radio receiver installed in the automation.

Two identical NICE motors can have different receiver systems depending on installation date and accessories fitted.

NICE FLO2R-S Applications

• Sliding gate motors
• Swing gate motors
• Garage door openers
• Parking boom barriers
• Rolling shutter systems with compatible receiver
• Villa gate automation
• Apartment parking gates
• Gated communities
• Commercial vehicle entrances
• Office parking systems

Sliding Gate Compatibility

The FLO2R-S can operate compatible NICE sliding gate motors when a FloR-compatible receiver such as a suitable SMXI or OXI configuration is installed.

Swing Gate Compatibility

FLO2R-S can operate compatible NICE swing gate systems where the installed radio receiver supports FloR coding.

Garage Door Compatibility

The remote can also operate compatible NICE garage door openers fitted with a FloR-compatible radio receiver.

Parking Barrier Compatibility

NICE parking barriers can use FLO2R-S where the installed receiver is configured for compatible FloR radio coding.

Replacement NICE FloR Remote UAE

The NICE FLO2R-S is particularly useful as a replacement or additional transmitter for older NICE installations already operating with FloR rolling-code remotes.

Before ordering, check:

• Existing remote model
• Receiver model
• 433.92 MHz frequency
• FloR coding compatibility
• Whether receiver access is available
• Whether remote-to-remote memorisation is enabled

Recommended FLO2R-S UAE Package

• 1 × NICE FLO2R-S 2-Channel Remote Control
• 1 × Pre-Installed 12V A23 Alkaline Battery
• User Instructions if Physically Included

Important: Remote programming should be listed separately if programming is an additional service rather than part of the product package.

NICE FLO2R-S Programming Service UAE

Programming support is available for compatible NICE FLO2R-S gate remote controls.

Depending on the installed receiver, programming may be carried out directly at the receiver or through an existing authorised transmitter where the receiver supports that method.

FLO2R-S Remote Not Working?

If the remote stops operating the gate or garage door, check:

• 12V A23 battery condition
• Remote LED operation
• Whether another remote still operates the automation
• Receiver power supply
• Receiver antenna condition
• Whether FLO2R-S is still stored in receiver memory
• Possible 433.92 MHz interference

Why Choose NICE FLO2R-S?

• Original NICE FloR-S transmitter family
• 2 independent command channels
• 433.92 MHz operating frequency
• NICE FloR dynamic rolling code
• Approx. 4.5 × 10¹⁵ digital combinations
• Compatible with suitable FloR receiver systems
• Compatible with SMXI
• Compatible with suitable OXI configurations
• Estimated 200 m outdoor range
• Estimated 35 m indoor range
• Replaceable 12V A23 battery
• Two-button practical design
• Suitable as a replacement for existing FloR installations
• Programming support available in UAE

Buy NICE FLO2R-S Remote Control UAE

Buy the NICE FLO2R-S gate remote control in UAE for compatible NICE sliding gates, swing gates, garage door openers, parking barriers and access automation systems.

Remote supply, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE FLO2R-S?
FLO2R-S is a 2-channel 433.92 MHz rolling-code transmitter from the classic NICE FloR-S radio family.

How many buttons does FLO2R-S have?
It has 2 channels / 2 command buttons.

What frequency does FLO2R-S use?
It operates at 433.92 MHz.

What coding does FLO2R-S use?
It uses the NICE FloR dynamic rolling-code system.

Is FLO2R-S the same as FLO2RE?
No. Both belong to the FloR radio family, but FLO2R-S is the older classic housing with a 12V A23 battery, while FLO2RE is the newer compact ERA FLOR transmitter using a CR2032 battery.

What battery does FLO2R-S use?
One 12V A23 alkaline battery.

What is the estimated range?
Official FloR-family documentation gives approximately 200 m outdoors and 35 m indoors under suitable conditions.

Does FLO2R-S work with SMXI?
Yes. SMXI supports NICE FloR encoding.

Does FLO2R-S work with OXI?
Yes, when the OXI receiver is configured for a compatible FloR encoding family.

Does every 433.92 MHz NICE receiver work with FLO2R-S?
No. Frequency alone does not guarantee compatibility; the receiver must support FloR coding.

Can FLO2R-S operate two gates?
Yes, provided each button is programmed into the appropriate compatible receiver.

Can I copy an existing FLO2R-S to a new remote?
Some compatible receiver installations support remote-to-remote memorisation. The exact procedure depends on the receiver.

If I lose my FLO2R-S, is it automatically disabled when I program another?
No. The lost transmitter can remain stored in receiver memory until it is specifically removed or the receiver memory is reconfigured.

Do you provide NICE FLO2R-S programming in UAE?
Yes. Programming and technical support can be provided for compatible NICE FloR receiver systems throughout the UAE.