NICE ERA FLOR FLO2RE Gate Remote Control – 2 Channel

NICE FLO2RE 433.92 MHz Rolling Code Remote UAE

The NICE ERA FLOR FLO2RE is a compact 2-channel 433.92 MHz rolling-code remote control designed for compatible NICE gate, garage door, parking barrier and access automation receivers. It belongs to the well-known NICE ERA FLOR transmitter family and provides secure, convenient radio control for residential, commercial and multi-user automation systems.

The FLO2RE uses a 52-bit digital rolling-code system with approximately 4.5 million billion possible combinations. Each transmitter has its own personal code and can be memorised into a compatible NICE receiver either directly at the receiver or, where the receiver and system configuration allow it, by using an already authorised transmitter.

The remote operates at 433.92 MHz, uses a replaceable 3V CR2032 lithium battery, provides two independent command buttons and has an estimated open-space radio range of approximately 150–200 metres with a correctly tuned antenna. Actual operating range depends on the receiver, antenna, building structure, interference and surrounding radio environment.

NICE ERA FLOR FLO2RE Key Features

• Original NICE ERA FLOR transmitter
• Official model: FLO2RE
• 2 independent radio channels
• 433.92 MHz carrier frequency
• 52-bit digital rolling-code technology
• Approximately 4.5 million billion possible code combinations
• Unique personal transmitter code
• Self-learning radio programming
• Can be memorised directly through compatible NICE receivers
• Remote-to-remote memorisation supported on compatible systems
• LED transmission indicator
• Estimated range up to 150–200 m in open space with tuned antenna
• 3V DC power supply
• CR2032 lithium battery
• Compact pocket-size design
• IP40 protection for protected environments
• Compatible with previous NICE Flor receiver families
• Compatible with selected NICE One/OXI receiver systems using Flor/O-Code compatibility
• Suitable for gates, garage doors, barriers and compatible access automation

NICE FLO2RE Technical Specifications

Brand	NICE
Series	ERA FLOR
Model	FLO2RE
Product Type	Radio Remote Control Transmitter
Number of Channels	2
Frequency	433.92 MHz
Radio Coding	52-bit Digital Rolling Code
Code Combinations	Approx. 4.5 Million Billion
Programming	Self-Learning / Receiver Memorisation
Power Supply	3V DC
Battery	CR2032 Lithium
Battery Life	Approx. 24–36 Months Depending on Usage & Document Revision
Estimated Open-Space Range	Approx. 150–200 m with Tuned Antenna
Typical Indoor Range	Approx. 35 m under Suitable Conditions
Protection Rating	IP40
Operating Temperature	-20°C to +55°C
Dimensions	Approx. 45 × 56 × 11 mm
Weight	Approx. 18 g
LED Indicator	Yes
Colour	Black

2-Channel Gate Remote Control

The FLO2RE has two independent buttons, allowing one transmitter to operate up to two compatible radio commands depending on receiver programming.

For example, button one can operate a sliding gate while button two can operate another gate, garage door or parking barrier, provided both automation systems use compatible NICE receivers.

433.92 MHz Radio Frequency

The NICE ERA FLOR FLO2RE operates at approximately 433.92 MHz.

Frequency alone does not determine compatibility. A replacement remote must also use a radio protocol accepted by the existing receiver.

52-Bit Rolling-Code Security

The FLO2RE uses NICE's 52-bit digital FloR rolling-code protocol.

The transmitted code changes according to the rolling-code system, helping protect the automation against simple fixed-code copying and unauthorised radio duplication.

NICE specifies approximately 4.5 million billion possible code combinations for the ERA FLOR system.

Important Compatibility Requirement

Before buying a FLO2RE as a replacement remote, verify both:

• The existing automation receiver operates at 433.92 MHz
• The receiver supports NICE FloR / compatible O-Code radio coding

A 433.92 MHz remote from a different protocol will not automatically work merely because the frequency is the same.

Compatible with Previous NICE Flor Receivers

NICE designed ERA FLOR to retain compatibility with previous-generation Flor receivers, including suitable universal, modular and NICE/SM-connector Flor receiver versions.

This makes FLO2RE useful as a replacement or additional transmitter on many existing NICE installations.

NICE One Receiver Compatibility

NICE catalogue documentation also lists compatibility with selected One-series receivers, including receiver families such as:

• OXI / OXIT
• OX2 / OX2T
• OX4T

The exact receiver configuration and stored radio coding must be checked before programming.

Important OXIBD Compatibility Note

Do not advertise FLO2RE as universally compatible with OXIBD bidirectional systems.

FLO2RE is a monodirectional ERA FLOR transmitter. An OXIBD receiver may support different NICE coding families depending on configuration, but compatibility should be checked against the actual receiver setup before sale.

Self-Learning Programming

The FLO2RE can be memorised into a compatible NICE radio receiver through its receiver-programming procedure.

The exact programming steps depend on the receiver or control board installed in the automation.

Remote-to-Remote Programming

On compatible NICE installations, a new FLO2RE can also be memorised near the automation using an already authorised transmitter.

This feature depends on the receiver settings and whether remote memorisation has been enabled.

Programming from the Receiver

The safest method when access to the automation control panel is available is to program the FLO2RE directly through the compatible receiver's radio-learning button.

This also helps avoid unintentionally programming the remote to a nearby NICE installation.

Do Not Copy by Holding Two Remotes Together Only

FLO2RE is not a simple fixed-code cloning remote.

Programming a new transmitter requires the compatible NICE receiver to accept the new transmitter code through its authorised memorisation process.

LED Transmission Indicator

The transmitter includes a built-in LED that provides visual confirmation when a button is pressed and during programming procedures.

If the LED becomes weak or inconsistent, the CR2032 battery should be checked before assuming that the transmitter or receiver is faulty.

CR2032 Lithium Battery

The FLO2RE uses a standard 3V CR2032 lithium coin-cell battery.

The battery is replaceable, making routine maintenance simple and inexpensive.

Battery Life

Previous NICE catalogue data specifies approximately 3 years of battery life based on around 10 transmissions per day, while current Nice partner data lists approximately 24 months under the same general usage assumption.

Because battery life varies with usage, temperature, battery quality and production revision, the safest product-page wording is:

“Long-life CR2032 battery; typical service life approximately 2–3 years depending on usage.”

Estimated Radio Range

NICE specifies an estimated range of approximately 150–200 metres in open space with a correctly tuned receiving antenna.

This figure is measured under favourable conditions and is not a guaranteed operating distance in every installation.

What Can Reduce Remote Range?

• Concrete walls
• Steel gates and metal structures
• Underground parking areas
• Nearby 433 MHz radio devices
• Poor receiver antenna positioning
• Damaged antenna cable
• Low remote-control battery
• Electrical interference

Compact 45 × 56 × 11 mm Design

The current compact NICE ERA FLOR transmitter is approximately 45 × 56 × 11 mm and weighs only about 18 grams.

Its small design makes the remote convenient to keep on a keyring, inside a vehicle or in a pocket.

IP40 Protection

The FLO2RE is rated approximately IP40 and is intended for use in protected environments.

It should not be treated as a waterproof remote control and should not be left exposed to rain, water or excessive moisture.

Operating Temperature

Current NICE partner technical data specifies an operating range of approximately -20°C to +55°C.

For UAE use, avoid leaving the transmitter for extended periods in locations exposed to extreme direct solar heating, such as the dashboard of a closed vehicle.

NICE ERA FLOR Remote Family

Model	Channels	Frequency	Coding
FLO1RE	1	433.92 MHz	52-bit FloR Rolling Code
FLO2RE	2	433.92 MHz	52-bit FloR Rolling Code
FLO4RE	4	433.92 MHz	52-bit FloR Rolling Code

FLO1RE vs FLO2RE vs FLO4RE

Choose FLO1RE when only one automation command is required. Choose FLO2RE when two separate commands are needed. Choose FLO4RE for installations where up to four compatible radio commands are required.

The basic radio technology is the same ERA FLOR 433.92 MHz rolling-code platform.

ERA FLOR CE Versions

NICE also produced ERA FLOR CE versions with sequential coding designed for easier management of larger batches of transmitters.

These versions are particularly useful for installers and multi-user sites where large numbers of remotes need to be prepared and managed.

NICE O-Box Programming

Compatible ERA FLOR systems can be managed using the NICE O-Box programming unit.

With the appropriate software and compatible transmitters or receivers, installers can manage transmitter codes and organise larger multi-user installations more efficiently.

Ideal for Multi-User Systems

Because every FLO2RE has its own personal code, the ERA FLOR system is well suited to multi-user installations such as:

• Apartment buildings
• Residential towers
• Gated communities
• Office parking areas
• Commercial properties
• Shared garage entrances

NICE FLO2RE Applications

• Sliding gate motors
• Swing gate motors
• Garage door openers
• Parking barriers
• Rolling shutter systems with compatible NICE receiver
• Commercial gate automation
• Residential villa gates
• Apartment parking gates
• Access-control automation with compatible NICE radio receiver

Gate Motor Compatibility

The FLO2RE can work with many NICE gate motors when the installed control board or radio receiver supports the NICE FloR radio protocol.

Compatibility is determined primarily by the receiver, not simply by the motor model printed on the gate operator.

Garage Door Compatibility

The FLO2RE can also control compatible NICE garage-door openers fitted with a FloR-compatible receiver.

Always check the radio receiver before replacing an older NICE garage remote.

Parking Barrier Compatibility

NICE parking barriers can use FLO2RE where the installed radio receiver supports the ERA FLOR / FloR protocol.

This is useful for private parking entrances, commercial parking areas and controlled vehicle-access systems.

Replacement NICE Gate Remote UAE

The FLO2RE is a suitable replacement or additional transmitter for many existing NICE Flor installations.

Before ordering a replacement, check:

• Old remote model number
• Receiver model
• Radio frequency
• Radio coding system
• Whether access to the receiver is available for programming

How to Identify FLO2RE

The genuine FLO2RE is part of the black compact ERA FLOR family and has two command buttons.

The model identification should be checked on the transmitter label or packaging before programming.

Recommended FLO2RE UAE Package

• 1 × NICE ERA FLOR FLO2RE Remote Control
• 1 × CR2032 Lithium Battery
• Programming Support / Instructions where supplied

Important: If you provide remote programming as an optional paid service, keep that service separate from the basic transmitter package on the product page.

Remote Programming Service UAE

Programming support is available for compatible NICE FLO2RE gate remote controls in the UAE.

Programming may be completed directly at the receiver or through an authorised existing remote where the automation configuration supports remote memorisation.

Lost Remote Control Security

If a FLO2RE transmitter is lost or stolen, simply adding a new remote does not automatically prevent the missing remote from operating the system.

For higher security, a technician can remove the lost transmitter from the receiver memory where the installed NICE receiver allows individual-code management, or clear and reprogram the receiver where appropriate.

Remote Not Working?

If a FLO2RE stops operating the gate, check the following before replacing it:

• Replace the CR2032 battery
• Check whether the transmitter LED illuminates
• Confirm the gate motor has power
• Check whether other remotes still work
• Inspect the receiver antenna
• Confirm the transmitter is still stored in receiver memory
• Check for radio interference

Why Choose NICE FLO2RE?

• Original NICE ERA FLOR transmitter
• 2 independent channels
• 433.92 MHz radio frequency
• 52-bit rolling-code system
• Approximately 4.5 million billion code combinations
• Compatible with many previous Flor receivers
• Compatible with selected NICE One receiver families
• Easy receiver memorisation
• Remote-to-remote programming on supported systems
• Replaceable CR2032 battery
• Compact 45 × 56 × 11 mm design
• Only approximately 18 g
• Ideal for residential and multi-user access systems
• Programming support available in UAE

Buy NICE ERA FLOR FLO2RE Remote Control UAE

Buy the NICE ERA FLOR FLO2RE gate remote control in UAE for compatible NICE sliding gates, swing gates, garage doors, parking barriers and access automation systems.

Remote supply, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is NICE FLO2RE?
FLO2RE is a 2-channel 433.92 MHz rolling-code transmitter from the NICE ERA FLOR remote-control family.

How many buttons does FLO2RE have?
It has 2 buttons / 2 channels.

What frequency does FLO2RE use?
It operates at 433.92 MHz.

What radio coding does it use?
FLO2RE uses NICE 52-bit FloR rolling-code technology.

Can a 433.92 MHz universal remote replace FLO2RE?
Not necessarily. Frequency alone is not enough; the replacement must support the correct NICE FloR rolling-code protocol.

What battery does FLO2RE use?
A replaceable CR2032 3V lithium battery.

How long does the battery last?
Typically around 2–3 years under normal use, depending on usage, environment and battery quality.

What is the operating range?
NICE specifies approximately 150–200 m in open space with a tuned antenna. Real installations may provide a shorter range.

Can FLO2RE control two gates?
Yes, provided each button is programmed into a compatible receiver for the required automation.

Can FLO2RE operate a garage door?
Yes, when the garage-door receiver supports the NICE FloR radio protocol.

Can FLO2RE operate a NICE parking barrier?
Yes, when the barrier is fitted with a compatible NICE receiver.

Can I copy FLO2RE from my old remote?
A new FLO2RE can often be memorised using an authorised existing transmitter near the receiver, but this depends on the receiver configuration. It is not a simple fixed-code cloning process.

Can FLO2RE be programmed directly from the receiver?
Yes. Compatible NICE receivers provide a memorisation procedure for adding a new FLO2RE.

Does FLO2RE work with OXI?
Yes, selected NICE OXI receiver configurations support FloR-compatible transmitters.

Does FLO2RE always work with OXIBD?
Do not assume universal compatibility. OXIBD is a bidirectional receiver platform and compatibility depends on its configured radio protocol.

Is FLO2RE waterproof?
No. NICE specifies approximately IP40, so it should be protected from rain and water.

Do you provide FLO2RE programming in UAE?
Yes. Programming and technical support can be provided for compatible NICE receiver systems throughout the UAE.