NICE TUB 4000 TUB4000 Industrial Sliding Gate Motor – 4000 KG

NICE TUB4000 Heavy-Duty Industrial Sliding Gate Motor UAE

The NICE TUB 4000 TUB4000 is a professional heavy-duty industrial automatic sliding gate motor designed for extremely large gates weighing up to 4000 KG. Manufactured by NICE for demanding industrial applications, the TUB4000 combines a powerful 400V AC electromechanical gearmotor, built-in NICE D-PRO 500 control unit, electromechanical braking and self-ventilated motor technology.

NICE specifies the TUB4000 with a 580 W motor, 1.6 A current draw, 0.16 m/s gate speed and approximately 7740 N force. The system is designed for factories, industrial compounds, warehouses, logistics centres, ports, shipyards, infrastructure facilities and other extra-heavy sliding gate installations throughout the UAE.

The TUB4000 can automate compatible sliding gates weighing up to 4000 KG or gate leaves up to approximately 30 metres long, subject to the operating limits defined by NICE.

NICE TUB 4000 Key Features

• Heavy-duty industrial sliding gate motor
• Suitable for sliding gates weighing up to 4000 KG
• Gate leaf length up to approximately 30 metres
• 400V AC electromechanical gearmotor
• Built-in NICE D-PRO 500 control unit
• Motor power: 580 W
• Current absorption: 1.6 A
• Gate speed: 0.16 m/s
• Maximum published force: 7740 N
• Up to 42 cycles/hour with gate leaves up to 5 m
• Electromechanical brake to reduce gate inertia
• Self-ventilated motor for intensive operation
• Heavy-duty metal and bronze gearing
• Non-reversible motor design
• Electromechanical limit switch system
• Professional programmable industrial control
• Compatible with NICE Pro-View programming
• Compatible with NICE MyNice Pro / BiDi-WiFi configuration where supported
• Manual release lever for emergency operation
• IP54 protection rating
• Designed for demanding industrial environments

NICE TUB4000 Technical Specifications

Brand	NICE
Series	TUB
Model	TUB4000
Product Type	Heavy-Duty Industrial Sliding Gate Motor
Maximum Gate Weight	4000 KG
Maximum Gate Length	Up to 30 Metres
Power Supply	400V AC, 50 Hz
Current Absorption	1.6 A
Motor Power	580 W
Gate Speed	0.16 m/s
Force	7740 N
Work Cycle	Up to 42 Cycles/Hour with Gates up to 5 m
Control Unit	NICE D-PRO 500 – Built In
Brake	Electromechanical Brake
Motor Cooling	Self-Ventilated
Limit Switch	Electromechanical
Gear Construction	Metal & Bronze
Protection Rating	IP54
Operating Temperature	-20°C to +50°C
Dimensions	480 × 240 × 580 mm
Weight	60 KG
Application	Industrial Sliding Gates

4000 KG Industrial Sliding Gate Automation

The NICE TUB4000 is designed specifically for extra-heavy sliding gates. With a maximum gate weight rating of 4000 KG, it is significantly more powerful than standard residential and commercial sliding gate operators.

This makes the TUB4000 suitable for industrial properties where gate structures are exceptionally large, heavy or frequently operated.

Maximum Gate Length up to 30 Metres

NICE specifies that the TUB4000 can automate compatible gates weighing up to 4000 KG or gate leaves measuring up to approximately 30 metres, according to the manufacturer's application limits.

Gate length directly affects operating frequency. A very long gate must operate at a considerably lower number of cycles per hour than a short gate.

NICE TUB4000 Operating Cycles by Gate Length

Gate Length	Maximum Cycles / Hour
Up to 5 m	42
5 – 10 m	21
10 – 15 m	14
15 – 20 m	10
20 – 25 m	8
25 – 30 m	7

The 42 cycles/hour figure therefore applies only to gates up to approximately 5 metres long. Longer industrial gates must operate at a reduced frequency.

7740 N Heavy-Duty Gate Force

The NICE TUB4000 has a published force rating of approximately 7740 N. This high force capability is designed to provide reliable movement of correctly installed extra-heavy sliding gates.

The gate must still move freely mechanically. Wheel damage, track misalignment, excessive rack pressure or gate deformation can significantly increase the load on the motor.

580 W 400V Industrial Motor

The TUB4000 operates from a 400V AC 50 Hz three-phase electrical supply and has a specified electrical absorption of approximately 1.6 A with 580 W motor power.

NICE notes that the motor can also be used at 60 Hz, although operating performance changes accordingly.

0.16 m/s Gate Speed

The NICE TUB4000 has a published travel speed of approximately 0.16 metres per second.

For very large industrial gates, controlled and reliable movement is generally more important than extremely high speed. The TUB4000 is engineered primarily for high gate capacity, durability and industrial duty.

Built-In NICE D-PRO 500 Control Unit

The NICE TUB4000 is supplied with a built-in NICE D-PRO 500 industrial control unit. This dedicated controller is designed to manage heavy-duty gate and industrial door motors.

The D-PRO 500 provides professional automation logic, safety inputs, radio receiver compatibility, programmable operating functions and integration with industrial access control systems.

D-PRO 500 Power & Control Capability

The D-PRO 500 control platform can manage compatible single-phase and three-phase motors and supports industrial motor power up to approximately 2.2 kW.

It also supports programmable inputs and outputs, stop circuits and compatible safety-edge systems, making it suitable for complex industrial access installations.

Electromechanical Brake

The TUB4000 includes an electromechanical brake designed to reduce gate inertia when the motor stops.

This is especially important with a very heavy sliding gate because a gate weighing several tonnes can retain considerable momentum. Controlled braking improves stopping accuracy and helps reduce unwanted gate movement after the motor stops.

Self-Ventilated Industrial Motor

The NICE TUB4000 uses a self-ventilated motor to improve cooling during repeated operation.

Motor ventilation allows the system to better manage heat during intensive industrial use and contributes to the TUB4000's higher working-cycle capability.

Metal & Bronze Gear Transmission

NICE uses metal and bronze gearing in the TUB4000 transmission system to provide high mechanical durability while maintaining smooth operation.

This heavy-duty construction is appropriate for industrial gates where the motor may experience high mechanical loads over many operating cycles.

Electromechanical Limit Switch

The NICE TUB4000 uses an electromechanical limit-switch system to determine the gate's fully open and fully closed positions.

The limit-switch system should be professionally adjusted during commissioning to ensure correct stopping positions and safe gate operation.

Professional Programming with Pro-View

NICE's current documentation identifies the TUB4000 as compatible with the NICE Pro-View professional programming system.

Qualified installers can use compatible programming tools to configure operating parameters, diagnostics and automation functions according to the gate and site requirements.

MyNice Pro & BiDi-WiFi Programming

Current NICE catalogue information also lists programming through compatible BiDi-WiFi and MyNice Pro tools where the appropriate interface is installed.

This provides professional technicians with additional options for commissioning and managing modern NICE automation systems.

Manual Emergency Release

The NICE TUB4000 includes a practical manual release lever. The release allows the gate to be disengaged from the motor so that it can be moved manually when required.

Because gates of this size can be extremely heavy, manual movement must only be attempted when the gate is mechanically safe and capable of moving freely.

IP54 Industrial Protection

The TUB4000 carries an IP54 protection rating, providing greater protection against dust and water ingress than many smaller IP44 residential gate motors.

The motor should nevertheless be professionally installed with appropriate electrical protection, drainage and cable management for outdoor industrial applications.

NICE TUB4000 Compatible Accessories

• NICE D-PRO 500 control unit
• NICE OXI / OXIBD compatible radio receiver
• NICE remote controls
• NICE EPM photocell sensors
• NICE ELAC flashing warning light
• NICE NDA040 potential-free output module
• NICE Pro-View programmer
• Compatible BiDi-WiFi programming interface
• ROA81 heavy-duty galvanized steel rack
• Safety edges
• Emergency stop buttons
• Industrial push buttons
• Key selector switches
• Vehicle loop detectors
• GSM gate opener systems
• RFID access control systems
• UHF long-range RFID readers
• ANPR vehicle access systems
• Intercom systems

Heavy-Duty Steel Rack Recommended

For an industrial gate of this capacity, heavy-duty steel rack is normally preferable to standard lightweight residential rack systems.

NICE lists the ROA81 galvanized M6 steel rack, 30 × 30 × 1000 mm, among the common TUB4000 accessories. Rack selection must match the motor pinion and actual gate loading.

NICE TUB4000 Kit Includes

• 1 × NICE TUB4000 Industrial Sliding Gate Motor
• 1 × Built-In NICE D-PRO 500 Control Unit
• 1 × NICE OXIBD Radio Receiver
• 1 × NICE ELAC Signal Lamp with Antenna
• 1 × NICE EPM Photocell Pair
• 2 × NICE FLO2R Remote Controls

Note: The accessories above reflect the package currently listed for this product. Package contents can vary according to supplied stock and project requirements. Confirm the exact receiver, photocells, remote controls, flashing light and rack before ordering.

NICE TUB4000 Applications

• Extra-heavy industrial sliding gates
• Factories and manufacturing plants
• Industrial compounds
• Logistics centres
• Distribution centres
• Warehouses
• Container yards
• Ports and shipyards
• Power plants
• Infrastructure facilities
• Airports and cargo facilities
• Military and high-security entrances
• Heavy truck access gates
• Sliding gates up to 4000 KG
• Long industrial gates up to approximately 30 metres

NICE TUB4000 for Factories UAE

The NICE TUB4000 4000 KG industrial gate motor is ideal for factory entrances where large steel sliding gates are used for truck and employee access.

The combination of high gate capacity, 7740 N force, electromechanical brake and self-ventilated motor provides a strong solution for demanding industrial automation.

NICE TUB4000 for Logistics Centres

Logistics and distribution facilities often require very wide industrial gates for trucks, containers and commercial vehicles. The TUB4000's ability to automate compatible gates up to approximately 30 metres makes it suitable for many of these installations.

Operating frequency must be calculated according to gate length. A 25 to 30 metre gate has a much lower allowable cycle rate than a short 5 metre gate.

NICE TUB4000 for Ports & Shipyards

The TUB4000 can also be used for heavy sliding gate automation at ports, shipyards and large infrastructure facilities where exceptionally heavy gate construction is common.

Sites exposed to salt, dust or high humidity require appropriate corrosion protection and regular mechanical and electrical maintenance.

NICE TUB4000 vs RUN2500

The NICE TUB4000 is significantly larger and stronger than the NICE RUN2500. RUN2500 is designed for gates up to approximately 2500 KG, while TUB4000 increases maximum gate capacity to 4000 KG.

TUB4000 also uses a 400V industrial motor, built-in D-PRO 500 controller, self-ventilation and an electromechanical brake, making it better suited to extremely large industrial gate structures.

NICE TUB4000 vs RUN2500I

The RUN2500I is an inverter-controlled high-performance motor for gates up to 2500 KG. TUB4000 is designed for substantially heavier gates up to 4000 KG.

RUN2500I may be preferable when speed and inverter-controlled movement are the priority, while TUB4000 is the stronger choice where maximum gate weight and industrial construction are the main requirements.

Professional NICE TUB4000 Installation UAE

Professional installation of the NICE TUB 4000 TUB4000 industrial sliding gate motor is available throughout the UAE. Installation can include site inspection, electrical supply verification, reinforced motor foundation, heavy-duty steel rack installation, limit-switch adjustment, safety photocells, radio receiver setup, remote programming and D-PRO 500 commissioning.

Because the TUB4000 requires a 400V industrial electrical supply and can automate gates weighing several tonnes, installation should be completed by qualified gate automation and electrical technicians.

400V Electrical Supply Requirement

The NICE TUB4000 requires a suitable 400V AC electrical supply. It should not be connected directly to an ordinary 230V residential circuit.

The electrical installation should include correctly sized protection devices, isolator, earthing, cabling and other electrical protection according to the installation requirements and local regulations.

NICE TUB4000 Repair & Spare Parts UAE

Technical support is available for NICE TUB4000 repair, maintenance, programming and spare parts. Replacement and compatible components can include NICE D-PRO 500 control units, radio receivers, remote controls, photocells, electromechanical limit components, brake components, programming accessories and heavy-duty steel rack.

Professional diagnosis is strongly recommended before replacing control or mechanical parts because industrial gate faults can originate from the motor, brake, limits, control unit, rack, wheels, power supply or connected safety accessories.

Why Choose NICE TUB 4000?

• Designed specifically for extra-heavy industrial sliding gates
• Maximum gate weight up to 4000 KG
• Gate leaf length up to approximately 30 metres
• 400V industrial motor
• 580 W motor power
• 7740 N published force
• 0.16 m/s gate speed
• Up to 42 cycles/hour with gate leaves up to 5 m
• Built-in NICE D-PRO 500 control unit
• Electromechanical brake
• Self-ventilated motor
• Metal and bronze gears
• Electromechanical limit switch
• Professional Pro-View programming support
• IP54 industrial protection
• Professional installation available throughout UAE

Buy NICE TUB 4000 TUB4000 Gate Motor UAE

Buy the NICE TUB 4000 TUB4000 4000 KG industrial sliding gate motor in UAE for reliable automation of extra-heavy factory, warehouse, logistics and industrial gates. Contact us for product availability, UAE delivery, professional installation, commissioning, repair, maintenance and genuine NICE spare parts.

Supply and installation support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is the maximum gate weight for NICE TUB4000?
The NICE TUB4000 is designed for compatible sliding gates weighing up to 4000 KG.

What is the maximum gate length for NICE TUB4000?
NICE specifies application limits up to approximately 30 metres depending on gate weight and operating requirements.

What electrical supply does NICE TUB4000 require?
The TUB4000 operates from a 400V AC 50 Hz industrial power supply.

What is the motor power of NICE TUB4000?
NICE specifies approximately 580 W with around 1.6 A current absorption.

What is the force of NICE TUB4000?
The published force is approximately 7740 N.

How fast is NICE TUB4000?
The published gate speed is approximately 0.16 m/s.

How many cycles per hour can NICE TUB4000 perform?
For gates up to 5 metres long, NICE specifies up to 42 cycles/hour. Longer gates require reduced cycle frequency.

Can TUB4000 perform 42 cycles/hour with a 30 metre gate?
No. NICE specifies approximately 7 cycles/hour for gates between 25 and 30 metres long.

What control unit does NICE TUB4000 use?
The TUB4000 is supplied with a built-in NICE D-PRO 500 industrial control unit.

Does NICE TUB4000 have a brake?
Yes. It has an electromechanical brake designed to reduce the inertia of very heavy sliding gates.

Is the motor ventilated?
Yes. The TUB4000 uses a self-ventilated motor to improve its operating cycle during intensive applications.

What type of limit switch does TUB4000 use?
The NICE TUB4000 uses an electromechanical limit switch.

Can NICE TUB4000 be programmed professionally?
Yes. NICE supports professional programming using compatible Pro-View and related NICE programming tools.

Is NICE TUB4000 suitable for factories and logistics centres?
Yes. NICE specifically designs the TUB4000 for large industrial sliding gate automation.

Do you provide NICE TUB4000 installation in UAE?
Yes. Professional supply, installation, programming, repair and maintenance support is available throughout the UAE.