NICE RUN 400 HS RUN400HS High-Speed Sliding Gate Motor – 400 KG

NICE RUN400HS High-Speed Automatic Sliding Gate Motor UAE

The NICE RUN 400 HS RUN400HS is a professional high-speed automatic sliding gate motor designed for sliding gates weighing up to 400 KG and measuring up to 14 metres in length. Designed for installations where very fast vehicle access is required, the RUN400HS can reach a no-load gate speed of up to 42 m/min, approximately 0.70 m/s.

The NICE RUN400HS high-speed sliding gate opener combines powerful 24V electromechanical technology with NICE BlueBUS communication, intelligent electronic control, automatic gate-length learning, obstacle detection and configurable speed and force settings. It is suitable for residential, commercial and compatible industrial sliding gates throughout the UAE.

NICE RUN400HS Key Features

• High-speed automatic sliding gate motor
• Designed for sliding gates weighing up to 400 KG
• Maximum gate length up to 14 metres
• 24V electromechanical gear motor
• 230V AC mains power supply
• Maximum no-load speed: 42 m/min – approximately 0.70 m/s
• Speed at nominal torque: 32 m/min – approximately 0.53 m/s
• Maximum start-up torque: 12.3 Nm
• Maximum start-up force: 340 N
• Nominal torque: 5.6 Nm
• Nominal force: 157 N
• NICE BlueBUS technology
• Integrated electronic control unit
• Automatic gate-length learning
• Electronic motor-force control
• Adjustable operating speed
• Adjustable acceleration and deceleration
• Partial pedestrian opening function
• Automatic closing function
• Close-after-photo function
• Master/Slave operation for compatible opposing sliding gates
• Optional backup battery system
• Manual emergency release
• IP44 protection rating

NICE RUN400HS Technical Specifications

Ultra-Fast Sliding Gate Operation

The main advantage of the NICE RUN400HS is its extremely fast gate movement. NICE specifies a maximum no-load speed of 42 metres per minute, equivalent to approximately 0.70 metres per second. At nominal torque, the specified gate speed is approximately 32 metres per minute or 0.53 m/s.

This makes the RUN400HS an excellent solution for properties where reducing gate opening and closing time is important. Fast operation can help improve vehicle access, reduce waiting time and improve entrance security by allowing the gate to close more quickly after a vehicle passes.

400 KG Gate Capacity & 14 Metre Gate Length

The NICE RUN 400 HS is designed for compatible sliding gates weighing up to 400 KG. Unlike many smaller residential gate motors, the RUN400HS can be used with gates measuring up to 14 metres in length when the installation complies with the manufacturer's operating limits.

Gate weight alone should not be used to select a motor. Gate length, wheel condition, track alignment, rolling resistance, wind exposure and expected operating frequency should all be checked before installation.

High Operating Frequency

The NICE RUN400HS is designed for intensive applications, but the permitted number of cycles depends on gate length and gate weight.

The actual permitted duty cycle is also affected by gate weight and installation conditions. Professional assessment is recommended for intensive commercial or industrial applications.

NICE BlueBUS Technology

The NICE RUN400HS gate motor features NICE BlueBUS communication technology. BlueBUS allows compatible gate automation and safety accessories to communicate with the control unit using only two wires for both power and data transmission.

Compatible photocells, safety devices, control devices and signalling accessories can be connected through the BlueBUS system. The control unit automatically recognises supported BlueBUS devices during programming.

Automatic Gate Length Learning

The NICE RUN400HS control unit can automatically learn the travel length of the sliding gate. During setup, the system identifies the opening and closing positions and calculates appropriate slowdown and partial-opening points.

This simplifies professional programming and allows the motor movement to be configured according to the physical dimensions of the installed gate.

Six-Level Motor Speed Adjustment

The NICE RUN400HS high-speed motor provides configurable operating speed through its electronic control system. Speed can be selected from several levels including very slow, slow, medium, fast, very fast and extremely fast.

This allows the installer to balance high-speed performance with gate weight, mechanical condition and site safety requirements instead of operating every installation at maximum speed.

Electronic Motor Force Adjustment

The RUN400HS provides multiple electronic motor-force settings. Correct force adjustment allows the motor to provide sufficient power to move the gate while maintaining appropriate obstacle-detection performance.

Excessive force should never be used to compensate for a gate that has mechanical resistance. Worn wheels, damaged tracks, incorrect rack alignment and other mechanical problems should be corrected before programming the motor.

Obstacle Detection & Safety

The NICE RUN400HS includes electronic motor-force monitoring and supports compatible safety devices. BlueBUS photocells can be connected to help protect the gate entrance during automatic opening and closing.

Because this is a very high-speed sliding gate operator, correct safety-device installation and force testing are especially important. The complete automation system should be professionally commissioned before normal use.

Electromechanical Limit Switch

The NICE RUN400HS uses an electromechanical limit switch system for detecting the fully open and fully closed gate positions. The control system uses these positions together with the learned gate length to calculate slowdown and stopping points.

Correct positioning of the limit-switch brackets is essential for safe and reliable gate operation.

Partial Pedestrian Opening

The NICE RUN 400 HS provides a programmable partial-opening function. The gate can be configured to open only a selected distance for pedestrian access instead of completing a full vehicle-opening cycle.

This feature is convenient for villas, compounds and business entrances where both pedestrians and vehicles use the same sliding gate.

Automatic Closing Functions

The RUN400HS includes configurable automatic closing and close-after-photocell functions. When properly programmed, the gate can automatically close after a selected pause time or shortly after a vehicle clears the photocell safety beam.

Automatic closing functions should only be enabled when the required gate safety devices are correctly installed and tested.

Master & Slave Dual Sliding Gate Operation

The NICE RUN400HS supports a Master/Slave operating mode. This allows two compatible RUN motors to be synchronized for opposing sliding gate leaves.

This configuration can be useful for wide commercial, compound or industrial entrances where two sliding gate panels meet in the centre.

Optional Backup Battery System

The NICE RUN400HS supports an optional emergency backup battery configuration using the NICE PS524 charging interface together with a pair of B12-B.4310 12V 7Ah batteries.

When correctly installed, this backup system can provide emergency gate operation during a mains electricity failure.

NICE RUN400HS Compatible Accessories

• NICE OXI compatible radio receiver
• NICE remote controls
• NICE BlueBUS photocell sensors
• NICE flashing warning lights
• NICE PS524 battery charging interface
• B12-B.4310 backup batteries
• NICE Oview programming interface
• Compatible nylon gate gear racks
• Steel gate gear racks
• Push button switches
• Key selector switches
• GSM gate opener systems
• Wi-Fi gate controllers
• RFID access control systems
• UHF long-range RFID readers
• Vehicle loop detectors

NICE RUN400HS Package

• 1 × NICE RUN400HS High-Speed Sliding Gate Motor
• 1 × Integrated Electronic Control Unit
• 2 × NICE FLO2RE Remote Controls
• 1 × NICE EPMB BlueBUS Photocell Pair
• 1 × NICE OXI Radio Receiver
• 4 × 1 Metre Nylon Gate Rack Sections
• 1 × Push Button
• 1 × Motor Fixing Bracket

Note: The package above reflects the accessories currently listed with this product. Package contents can change according to stock or kit configuration, so the supplied items should be confirmed before ordering.

NICE RUN400HS Applications

• Villa sliding gates
• Luxury residential entrances
• Residential compounds
• Apartment building entrances
• Commercial sliding gates
• Office and business entrances
• Warehouse gates
• Factory entrances
• Industrial access gates
• Private parking entrances
• High-speed vehicle access points
• Long sliding gates up to 14 metres

High-Speed Gate Motor for Villas UAE

The NICE RUN400HS high-speed gate motor is an excellent choice for UAE villas where rapid entrance and exit are important. With a maximum no-load travel speed of approximately 0.70 m/s, the RUN400HS can provide significantly faster gate movement than conventional residential sliding gate motors.

This can help reduce the amount of time a vehicle waits outside a property while also allowing the entrance to close more quickly after access.

NICE RUN400HS for Commercial & Industrial Entrances

The RUN400HS is also designed for compatible commercial and industrial sliding gate applications. Its heavy-duty housing, high-speed operation, configurable duty limits and advanced control system make it suitable for demanding entrance automation when the gate is within the manufacturer's weight and length limits.

For intensive installations, gate length and gate weight should be used together to calculate the permitted operating frequency.

NICE RUN400HS vs ROBUS High-Speed Motors

The NICE RUN400HS should not be confused with smaller NICE ROBUS high-speed motors. The RUN400HS has a larger industrial-style housing and reaches up to approximately 0.70 m/s no-load speed, while models such as the ROBUS 500 HS operate at lower maximum speeds.

The correct model should be selected according to gate weight, gate length, required speed, duty cycle and installation conditions.

Professional NICE RUN400HS Installation UAE

Professional installation of the NICE RUN 400 HS RUN400HS sliding gate motor is available throughout the UAE. Installation can include gate inspection, motor mounting, rack installation, limit-switch adjustment, BlueBUS photocell installation, receiver setup, remote programming and complete electronic configuration.

Because RUN400HS is capable of very high-speed movement, professional commissioning is particularly important. Speed, force, deceleration, obstacle detection, photocells, limit positions and emergency manual release should all be tested before normal operation.

NICE RUN400HS Repair & Spare Parts UAE

Technical support is available for NICE RUN400HS repair, programming, maintenance and spare parts. Compatible components can include electronic control parts, OXI receivers, NICE remote controls, BlueBUS photocells, limit-switch components, backup battery accessories and gate gear racks.

NICE recommends scheduled maintenance for the RUN automation system to help maintain safe and reliable operation.

Why Choose NICE RUN 400 HS?

• Ultra-fast sliding gate automation
• Maximum no-load speed up to 0.70 m/s
• Suitable for sliding gates up to 400 KG
• Maximum gate length up to 14 metres
• 340 N maximum start-up force
• 24V electromechanical technology
• NICE BlueBUS communication
• Adjustable motor speed and force
• Automatic gate-length learning
• Electronic obstacle detection
• Partial pedestrian opening
• Master/Slave dual-gate capability
• Optional PS524 battery backup system
• IP44 protection rating
• Professional installation available throughout the UAE

Buy NICE RUN400HS High-Speed Gate Motor UAE

Buy the NICE RUN 400 HS RUN400HS high-speed sliding gate motor in UAE for fast and reliable residential, commercial and industrial gate automation. Contact us for product availability, UAE delivery, professional installation, programming, maintenance and NICE gate motor spare parts.

Supply and installation support is available across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain.

Frequently Asked Questions

What is the maximum gate weight for NICE RUN400HS?
The NICE RUN400HS is designed for compatible sliding gates weighing up to 400 KG.

What is the maximum gate length for NICE RUN400HS?
NICE specifies a maximum sliding gate length of 14 metres.

How fast is NICE RUN400HS?
The RUN400HS can reach a no-load speed of 42 m/min, approximately 0.70 m/s. At nominal torque the specified speed is 32 m/min, approximately 0.53 m/s.

What is the maximum force of NICE RUN400HS?
The maximum start-up force is approximately 340 N, corresponding to 12.3 Nm maximum start-up torque.

What is the nominal force of RUN400HS?
The nominal force is approximately 157 N, corresponding to 5.6 Nm nominal torque.

How many cycles per hour can RUN400HS perform?
The permitted number depends on gate length and weight. For a gate up to 4 metres long, NICE specifies up to 67 cycles per hour. Longer or heavier gates have lower permitted cycle limits.

Does NICE RUN400HS support BlueBUS?
Yes. NICE BlueBUS allows compatible photocells and automation accessories to communicate with the control unit using a simplified two-wire connection.

Can RUN400HS operate during a power failure?
Yes, an optional backup configuration can be installed using the NICE PS524 charging interface with a pair of compatible B12-B.4310 12V 7Ah batteries.

Can NICE RUN400HS operate two opposing sliding gates?
Yes. The RUN control system supports Master/Slave operation for compatible dual opposing sliding gate installations.

Is NICE RUN400HS suitable for commercial gates?
Yes. It can be suitable for commercial and industrial sliding gates when the gate weight, length and operating frequency are within the manufacturer's specified limits.

Do you provide NICE RUN400HS installation in UAE?
Yes. Professional installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman and other UAE locations.