NICE RUN 2500 KG Sliding Gate Motor in UAE

NICE RUN 2500 KG Sliding Gate Motor:

• Made in Italy
• Nice RUN2500
• For sliding gates weighing up to 2500 kg (RUN2500)
• Suitable to operate in extreme conditions, in systems for intensive use.
• Ventilated motor with inductive limit switch
• (RUN2500P) or electromechanical limit switch RUN2500.

Easy to install:

• the BlueBUS system enables connections by means of just two wires between the control unit
• and up to 15 control safety and signalling devices.
• the acceleration settings (at the start of the manoeuvre) and the deceleration settings
• (at the end of the manoeuvre) are precise and reliable.
• Advanced temperature sensor:
• Run is able to manage force, adapting it to the different climatic and environmental conditions,
• while adapting the thermal cut-out protection and intensity of self-ventilation,
• depending on the temperature reading.
• Master/slave selection:
• for automatic synchronisation even of 2 motors,
• allowing automation of sliding gates with two opposing leaves.

Practical and functional:

• the control unit (and inverter on version RUN2500I), housed inside Run, can be
• simply connected by means of the practical connector guide.
• Silent: gear motor on bearings.

NICE RUN 2500 KG Technical Data:

• Code RUN2500
  
• ELECTRICAL DATA
• Power supply (Vac/Hz) 230/50*
• Absorption (A) 3.8
• Power (W) 870
• PERFORMANCE DATA
• Speed (m/s) 0,17
• Force (N) 1390
• Work cycle (cycles/hour) 42
• DIMENSIONAL AND GENERAL DATA
• Protection level (IP) 44
• Working temp. (°C Min/Max) -20 ÷ +50
• Dimensions (mm) 400x255x390 h
• Weight (kg) 24,5

NICE RUN 2500 Included:

• 1 x Run2500 Motor with electromechanical limit switch (230v).
• 1 x Rua1 Integrated control unit.
• 2 x ON2E Remotes.
• 1 x EPMB Pair of Blue bus Photocells.
• 1 x OXI Receiver.
• 1 x Blinker Light.
• 1 x Push button.